Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM 1" Diameter Ball with Custom GoPro Hero Adapter GoPro cameras have reinvented how we capture some of the most exciting moments in our lives. Nearly two decades ago, RAM began reinventing mounting systems so that enthusiasts could use their cameras and video equipment like never before. RAM is proud to offer a sleek new adapter that will bring two revolutionary product lines together and open up a world of possibilities. While the GoPro line of mounting accessories is nothing to scoff at, the diversity of the RAM product line is simply unmatched. Dream it. Live it. Capture it. RAM Mounting Systems and GoPro make it possible to truly "Be a HERO". The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Compatible GoPro Cameras: All HD HERO Original + HD HERO2 Professional Cameras Features: Patented rubber ball design dampens shock and vibration helping to extend the life of your camera Mount to many RAM double socket arms and mounts Multiple articulation and adjustment points for perfect viewing angles Lifetime warranty Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

1" Ball "Light Use" Flat Surface Mount f/Raymarine Dragonfly The RAM-B-101-RYM1 consists of (2 quantity) 2.5" diameter round bases that contains the universal AMPS hole pattern and standard length double socket arm. Included are (3 quantity) (#8-32 x 3/4" PH PD Mach Screws) and (3 quantity) (#8-32 SS Nylock Nuts) that will connect the RAM-B-101-RYM1 to the bottom of all Raymariner Dragonfly Sonar/GPS devices. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. This is a drill-down mounting solution. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

    keywords: Raymarine, Dragonfly7, Dragon Fly, Raymarine Dragonfly7, Raymarine Dragon fly, Raymarine Dragon Fly 7      

RAM-ROD Combination Bulkhead/Flat Surface Base with Plunger for Spline Posts The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Compatible with RAM post and spline rod holders and RAM wedge mount ball adapters. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ Wrench The RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. The RAM-D-111U-C is Compatible With: Garmin Fishfinders and GPS Chartplotters Humminbird Fishfinders and GPS Chartplotters Lowrance Fishfinders and GPS Chartplotters Raymarine Fishfinders and GPS Chartplotters Overall Height: 8.125" Weight Capacity: Up to 15 lbs. Weight: 3.45 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size Hi-Torq™ Wrench The RAM handle wrench is designed to be used with the knob found on "D" size ball arms and mounts. The wrench matches the shape of the knob found on the side of "D" arms, and lets you give the arm an extra tight grip. This wrench was originally made for the military when using the RAM mounts in cold weather, and the knob could not be tightened by hand.

RAM Lil Buddy™ Adhesive Stick Base Dash Mount with Compatible Garmin G-Ball Minimalists in design yet incredibly useful is the RAM Lil' Buddy mount. Using an adhesive disk, put the Lil' Buddy practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy. Deciding what you want to mount may be a tough decision though. With so many uses, your iPhone, Blackberry, Palm, or MP3 player can be perfectly matched and supported by your new best friend, the RAM Lil' Buddy. Also, for all you Garmin folks, note that the ball on the Lil' Buddy will snap right into the ball receiver on your GPS. The Lil' Buddy attaches directly to any Garmin GPS Personal Navigation Device with factory mounting bracket that accommodates the Garmin "G-Ball". This mount rotates 180 degrees. The RAM Lil' Buddy mount is compatible with the following Garmin GPS Personal Navigation Devices: nuvi 2xx nuvi 2xxW nuvi 3xx nuvi 6xx series nuvi 7xx series nuvi 8xx series StreetPilot i3 StreetPilot i5 Material: High Strength Composite Note: Purchase of product does not include Garmin GPS device or factory mounting bracket. The "U" in the part number reflects product packaged in poly bag.

D Size 2.25" Ball on Round Plate with AMPS Hole Pattern The RAM-D-254U consists of a 2.25" diameter rubber ball, connected at right angles to a 2.4375" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size Note: The "U" in the part number reflects product packaged in poly bag Weight: 0.6 lbs.

RAM® D Size Souble Ball Adapter The RAM-D-230U is a 2.25" double ball connector, allowing you to connect two socket arms together and maintain a flexible mount.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: D Size 2.25" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.83 lbs.

Adhesive Mount Rigging Strip 12" Rig Strip for any flat surface Conveniently stores pre-rigs, plugs & spoons Pre-drilled holes Made of exterior grade PVC Offered in white with marine grade peel & stick

D Size 2.25" Ball Mount with 2 qty 3.68" Round Plates & Short Length Double Socket Arm The RAM-D-101U consists of (2 qty) 3.68" diameter round bases and SHORT length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. Designed into the mount is a 2.25" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 3.0 lbs.

D Size 2.25" Ball Mount with 2 - 3.68" Round Plate & Medium Length Double Socket Arm The RAM-D-101U consists of (2 qty) 3.68" diameter round bases and STANDARD length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. Designed into the mount is a 2.25" diameter rubber ball and socket system with adjustment points at both socket ends of the arm. Weight Capacity: Up to 15 lbs. Ball Size: 2.25" Rubber Ball Size Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag. Weight: 3.95 lbs.

Gimbal Bracket for FL Series Allows for mounting of all Vexilar flasher heads to any flat surface or to be secured to the Vexilar Pro Mount system.  The gimbal bracket allows for up-down movement flasher head and the Pro Mount allows for full left/right rotation and alignment. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Surface Mount Kit for MS-ERX400 Wired Remote Control Surface mount your Apollo ERX400 wired remote onto a flat surface using the optional accessory spacer. *Sold as an Individual  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2-Pack RAM® Roller-Ball™ Paddle & Accessory Holder With the 2-Pack RAM® Roller-Ball™ holder for tracks, easily secure your heavy-duty net, paddle, gaff hooks, stakeout / push poles, or BogaGrip®. Its three-point security design on each RAM® Roller-Ball™ means there are always three points of tension keeping your net, paddle or other items attached, while also ensuring quiet placement and removal. The T-Bolt adapter is compatible with the RAM® Tough-Track™ and most other kayak track systems, and holds paddles and poles 1” - 1 5/16” in diameter.  Specifications: Material: Rubber and High Strength Composite Note: Part number reflects product packaged in retail bag for store shelf display Weight: 0.5 lbs. T-Bolt Dimensions: .48" x .95"