The RAM-D-201U powder coated marine grade aluminum 6.88" double socket arm allow for connnection to a 2.25" diameter ball. Socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 8.375"
Socket-To-Socket Length: 6.5625"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber Ball "D" Size
|
69.64 | |
RAM Double Socket Arm f/3-3/8" Ball Bases
Part #: RAM-E-201U
The RAM-E-201U double socket arm has a socket at both ends that accommodates 3.38" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. The socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 12.625"
Socket to Socket Length: 9.875"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
3.38" Rubber Ball E Size
|
158.98 | |
RAM® Quick-Grip™ Handlebar Mount for Apple MagSafe Compatible Phones
The RAM® Quick-Grip™ product line gets an Apple MagSafe Charger compatible insert. Designed specifically to fit the official Apple MagSafe Charger, this RAM® Quick-Grip™ phone holder has a removable backing plate so you can install your Apple MagSafe Charger directly into the holder with the ability to adjust the positioning of the charging disk depending on your iPhone 12 model iPhone. This insert allows a perfect and secure fit for the MagSafe's charging disk and is only compatible with the iPhone 12, 12 Pro, 12 Pro Max, and 12 mini with or without an official Apple MagSafe case. Included in this kit is the RAM® Handlebar U-Bolt base with B size short-length socket arm, perfect for handlebar mounting on your motorcycle, UTV, or e-bike. The U-Bolt base accommodates rails from 0.5" to 1.25" in diameter and includes a spacer for a tight fit without scratching the handlebar. Take advantage of your iPhone 12's magnetic MagSafe charging abilities with this MagSafe mount.
Features:
Kit includes RAM® Quick-Grip™ Holder for Apple MagSafe Charger, B size diamond ball base, short double socket arm, and RAM® U-Bolt base; MagSafe Charger not included
Compatible with iPhone 12 and 13 series, Pro and Pro Max, with or without Apple MagSafe phone cases; not compatible with standard phone cases
RAM® Quick-Grip™ Holder has a removable backing plate to adjust the positioning of the MagSafe Charger
U-bolt base includes bar spacer and accommodates rails from .5" to 1.25" in diameter
Backed by a lifetime warranty
Hardware Included:
Assembly Hardware
(1) Safety Tether
(1) 1/4"-20 U-Bolt for .5" - 1" Rails
(1) 1/4"-20 U-Bolt for 1" - 1.25" Rails
(2) 1/4"-20 Nylock Nuts
(2) Rubber Caps
(1) U-Bolt Spacer
Specifications:
CLAMP RANGE: .5" - 1.25" diameter
SOCKET-TO-SOCKET LENGTH: 1.75"
BALL/SOCKET SIZE: B Size (1")
WEIGHT CAPACITY: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
MATERIALS: Marine-grade aluminum, High strength composite
WEIGHT: 0.85 lbs.
ADDITIONAL INFORMATION: For iPhone 12 mini and 13 mini, a case is required and the use of included tether is required. Exposure to vibrations, like those generated by high-powered motorcycle engines, might impact iPhone cameras.
|
72.29 | |
Description:
The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 3.5"
Socket-To-Socket Length: 2.25"
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
|
12.96 | |
RAM® Swivel Double Socket Arm for B Size & C Size
Specifications:
Product Dimensions: Overall Length: 5.24"
Ball Size: B Size (1")/C Size (1.5")
Weight Capacity: Standard Use: 2 lbs/Heavy-Duty Use: 1 lb
Materials: High-strength composite
Weight: 0.48 lbs
|
21.41 | |
The 2.25" D Size Balls from Ram Mount
|
||
RAM Handle Wrench for "D" Size Ball Arms & Mounts
The RAM handle wrench is designed to be used with the knob found on "D" size ball arms and mounts. The wrench matches the shape of the knob found on the side of "D" arms, and lets you give the arm an extra tight grip. This wrench was originally made for the military when using the RAM mounts in cold weather, and the knob could not be tightened by hand.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber "D" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
22.93 | |
RAM® No-Drill™ Laptop Mount for '19-21 Chevy Silverado 1500 & GMC 1500
This RAM® No-Drill™ laptop stand system installs quickly and easily into the 2019 Chevrolet All-New Silverado and GMC Next Generation Sierra using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation.
The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions.
Specifications:
Placement of Mount: Passenger side, in front, where seat frame meets floor board
Drilling Requirements: No. Utilizes existing vehicle mounting points and hardware
Seat Configuration: Bucket
Material: High Strength Composite and Powder Coated Steel
Features:
Custom, No-Drill™ mounting base offers lowest profile in the industry
Ball and socket mounting system offers shock and vibration damping
Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry
Combination Telescoping pole adjusts both height and swing with one knob
Modular system makes changing your vehicle, or your device, simple and cost effective
Ability to mount laptops, tablets and other devices using the same mounting system
Universal Laptop Tray accommodates most laptops
Compatibility
Chevrolet
Silverado 1500 (2019-2021)
Silverado 2500 (2020-2021)
Silverado 3500 (2020-2021)
GMC
Next Generation Sierra 1500 (2019-2021)
Sierra 2500/HD (2020-2021)
Sierra 3500/HD (2020-2021)
|
235.96 | |
RAM® No-Drill™ Laptop Mount for 2019 Ford Ranger
This RAM® No-Drill™ laptop stand system installs quickly and easily into the 2019 Ford Ranger using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation.
The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions.
Specifications:
Placement of Mount: Passenger side, in front, where seat frame meets floor board
Drilling Requirements: No. Utilizes existing vehicle mounting points and hardware
Seat Configuration: Bucket
Material: High Strength Composite and Powder Coated Steel
Features:
Custom, No-Drill™ mounting base offers lowest profile in the industry
Ball and socket mounting system offers shock and vibration damping
Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry
Combination Telescoping pole adjusts both height and swing with one knob
Modular system makes changing your vehicle, or your device, simple and cost effective
Ability to mount laptops, tablets and other devices using the same mounting system
Universal Laptop Tray accommodates most laptops
|
224.50 | |
Dashboard Mount with Backing Plate for 7"-8" Tablets with Cases
The RAM® Tab-Tite™ bundle is a rugged mount including the RAM® Tab-Tite™, RAM® Universal Double Ball Mount with Two Round Plates, and RAM® Backing Plate Adapter. The RAM® Tab-Tite™ spring-loaded, quick-release holder offers a secure fit with easy access to the mounted tablet. The spring-loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions.
The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allow for almost infinite adjustment and perfect viewing angles. The included 2.10" x 2.60" steel backing plate with #8-32 threaded holes attaches to a variety of RAM® Mounts ball bases.
Features:
The spring-loaded holder secures 7 in. -8 in. tablets with a case; interchangeable end cups allow you to modify the holder when upgrading devices
Drill-down mounting solution; choose either round plate featuring the AMPS hole pattern for attachment to compatible device holders
2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases
Ball and socket technology allows for near-infinite adjustability
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers
Holder Dimensions (inch): Height Range: 8.32" - 10.92", Width Range: 4.43" - 5.3", Depth Range: .13" - .62"
Socket to Socket Length (inch): 2.5”
Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
Ball Size (inch): C size (1.5”)
Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs.
Materials: Marine-grade aluminum, high-strength composite, powder-coated steel
Weight: 1.98 lb.
Compatible Devices:
Samsung: Galaxy Tab 4 8.0 with Otterbox Defender Case, Galaxy Tab A 8.0 (2017) with Case, Galaxy Tab A 8.0 (2018) with Case, Galaxy Tab A 8.0 (2019) with Case, Galaxy Tab S 8.4 with Otterbox Defender Case, Galaxy Tab E 8.0 with Verizon Rugged Case, and Galaxy Tab Active2
|
74.64 | |
RAM® Tab-Lock™ Tablet Holder for 10" Tablets with Case + More
The RAM® Tab-Lock™ spring-loaded, quick-release cradle with a keyed lock offers a secure fit with easy access to the mounted tablet. The keyed lock offers theft deterrence and unwanted tampering in public settings. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab 4 10.1 and Tab S 10.5 with an Otterbox Defender case, but also support many other tablet models and industrial tablet PCs. The spring-loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The included back plate is interchangeable with various-size support cups, making it compatible with numerous tablet models. The detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. A set of four nuts and bolts is included to connect the cradle to any RAM components or mounts that contain the universal AMP hole pattern. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. The product consists of a holder only. Case not included.
Features:
Locking mechanism for theft deterrence
Support cups contain open slots to accommodate tablets of various sizes
The back plate can support various sizes of cups
Spring-loaded tension provides secure support and quick release for your tablet
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware, (2) #8 x 5/8" Sheet Metal Screws, (2) M4 x 32mm Machine Screws, (2) M4 Nylock Nuts, (2) Keys
Holder Dimensions: Height Range: 9.64" - 12.32", Width Range: 6.13" - 7.4", Depth Range: .13" - .7"
Hole Pattern: 4-Hole AMPS: 1.181" x 1.496"
Materials: High-strength composite
Packaging Type: Poly Bag
Weight: 1.25 lbs
|
65.87 | |
RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm & 2/2.5" Round Bases (AMPs Hole Pattern)
The RAM-316-3-202U consists of the RAM POD III No-Drill vehicle base, three rigid aluminum rod legs, double socket arm and two 2.5" round bases that contain the universal AMPs hole pattern. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The universal AMPs hole pattern found on the round base adapter will connect to many RAM cradles.
Leg Lengths:
18", 20" and 30"
Installation Instructions:
At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
136.92 | |
RAM Mount POD III Universal No-Drill Mount w/Double Socket Arm, 2.5" Round Base & 3.625" Square Base RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)
The RAM-316-3-2461U consists of the RAM POD III No-Drill vehicle base, 3 rigid aluminum rod legs, double socket arm, 2.5" round base that contain the universal AMPs hole pattern and 3.625" square base that contains the VESA hole pattern. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.
Leg Lengths:
18", 20" and 30"
Installation Instructions:
At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
140.00 | |
9mm Angled Base Motorcycle Mount w/Short Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle
The RAM-B-272-A-UN7 consists of an angled base with 9mm hole, SHORT double socket arm and universal spring loaded X-Grip® cradle for cell phones. The angled base is often used on motorcycles, attaching to the mirror frame, the main brand of bike for this part is BMW. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved.
The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Cradle Dimensions
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Features:
Rustproof
High strength composite and stainless steel construction
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Socket technology allows for multiple adjustment angles and articulation of device
Includes Tether for open cockpit and extreme environments
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
|
52.50 | |
RAM Rail Base with Zinc Coated U-Bolt, ATV/UTV Strap & 1" Ball for Rails to 3.15" in Diameter
Part #: RAM-B-231Z-2
Whether your UTV or ATV is bone stock or loaded with accessory racks and guards, the new RAM strap base lets you choose the best possible mounting location for almost anything. Designed for a clean installation, this base accommodates most common tubing sizes on UTV's and ATV's, allowing for the placement of the RAM rubber ball base. Safely concealing a strap clamp in a compact housing, you won't have to worry about exposed sharp edges or unwanted loosening. With the ball base in place, you have the foundation for mounting everything from GPS, Cell Phones, Radios, or maybe the famous RAM self-leveling drink cup holder. No matter what you choose to do with it, you'll wonder why your UTV or ATV didn't come from the factory with this must-have product. Included in the kit is a zinc coated metal u-bolt, this allowing you to modify the mount to accommodate mounting location. The base also includes black cover caps to be placed over the exposed ends of the u-bolt.
Strap Dimensions:
1.57" (40mm) to a maximum of 3.15" (80mm)
U-Bolt Holding Dimensions:
0.75" to a maximum of 1.25"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
22.56 | |