RAM Handlebar Rail Mount, Zinc Coated U-Bolt & 1" Diameter Ball with Custom GoPro Hero Adapter The RAM-B-149Z-GOP1U consists of a zinc coated u-bolt base, standard size double socket arm and 1" diameter ball with custom GoPro Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". Compatible GoPro Cameras: All HD HERO Original + HD HERO2 Professional Cameras U-Bolt Dimensions: Accommodates rails from 0.5" to 1.25" in diameter Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Small Tough-Claw™ Mount w/Custom GoPro® Hero Adapter The RAP-B-400-GOP1U consists of the small Tough-Claw™ base, double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. The GoPro® Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" Specifications/Features: Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.6 lbs.

Medium Tough-Claw™ Mount w/Custom GoPro® Hero Adapter The RAP-B-404-GOP1U consists of the medium Tough-Claw™ base, double socket arm and and 1" diameter ball with custom GoPro® Hero adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 1.875" outer diameter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The GoPro® Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Clamping Range (Rail/Tube Surfaces): 1" to 1.875" Clamping Range (Flat Surfaces): 0" to 1.6"

GoPro® Hero Adapter with Double Socket Arm Consists of a 1" diameter standard length double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The GoPro® Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Specs & Features Material:High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.35lbs Compatible Devices: GoPro HERO4 Black GoPro HERO4 Session GoPro HERO4 Silver GoPro Hero 3 GoPro Hero 2 GoPro Hero

1" Ball Mount with Custom GoPro® Hero Adapter The RAM-B-138-GOP1U consists of a 2.5" diameter round base with the universal AMPS hole pattern, STANDARD size double socket arm and 1" diameter ball with custom GoPror Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The RAM-B-138-GOP1 can be used as a drill-down or a temporary, removable mounting solution with the addition of the RAP-339U accessory. The GoPror Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. GoPro camera and black thumb screw not included with purchase.

RAM Handlebar Rail Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad Part #: RAM-B-149Z-TAB3U The RAM-B-149Z-TAB3U consists of a double socket arm, zinc coated u-bolt base, diamond adapter base and Tab-Tite™ cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the Tab-Tite™ cradle to your optimum viewing position. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The RAM Tab-Tite™ is compatible with the following tablets: Apple iPad Apple iPad 2 Apple iPad's with bumper or case including the Otterbox case HP TouchPad HP TouchPad's with bumper or case including the Otterbox case Tab-Tite™ Cradle Features: 1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

B Size 1" Fishfinder Ball Adapter for the Lowrance Hook2 Series Designed for light duty use, this B size (1”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect to a variety of compatible RAM mounting solutions. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM Handlebar Rail Mount, Zinc Coated U-Bolt, Short Double Socket Arm & 1" Diameter Ball with Custom GoPro Hero Adapter The RAM-B-149Z-A-GOP1U consists of a zinc coated u-bolt base, SHORT size double socket arm and 1" diameter ball with custom GoPro Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". Compatible GoPro Cameras: All HD HERO Original + HD HERO2 Professional Cameras U-Bolt Dimensions: Accommodates rails from 0.5" to 1.25" in diameter. Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Strap Clamp, Roll Bar Mount with 1" Diameter Ball & Custom GoPro Hero Adapter The RAM-B-149Z-2-GOP1U consists of a steel strap base, u-bolt bases, double socket arm and 1" diameter ball with custom GoPro Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Designed for a clean installation, the RAM strap mount will accommodate most common roll bar sizes, allowing for the placement of the RAM rubber ball base. This mount can also be attached to smaller diameter handlebars on ATVs using the included hardware. Compatible GoPro Cameras: All HD HERO Original + HD HERO2 Professional Cameras Rail Accommodation Dimensions: Mount with Strap: 1.57" to a maximum of 3.15" Mount with U-Bolt: 0.50" to a maximum of 1.25" Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Diameter Ball with Custom GoPro Hero Adapter GoPro cameras have reinvented how we capture some of the most exciting moments in our lives. Nearly two decades ago, RAM began reinventing mounting systems so that enthusiasts could use their cameras and video equipment like never before. RAM is proud to offer a sleek new adapter that will bring two revolutionary product lines together and open up a world of possibilities. While the GoPro line of mounting accessories is nothing to scoff at, the diversity of the RAM product line is simply unmatched. Dream it. Live it. Capture it. RAM Mounting Systems and GoPro make it possible to truly "Be a HERO". The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Compatible GoPro Cameras: All HD HERO Original + HD HERO2 Professional Cameras Features: Patented rubber ball design dampens shock and vibration helping to extend the life of your camera Mount to many RAM double socket arms and mounts Multiple articulation and adjustment points for perfect viewing angles Lifetime warranty Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Flat Surface Mount, Short Double Socket Arm & 1" Diameter Ball with Custom GoPro Hero Adapter The RAM-B-138-A-GOP1U consists of a 2.5" diameter round base with the universal AMPS hole pattern, SHORT size double socket arm and 1" diameter ball with custom GoPro Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The RAM-B-138-A-GOP1U can be used as a drill-down or a temporary, removable mounting solution with the addition of the RAP-339U accessory. Compatible GoPro Cameras: All HD HERO Original + HD HERO2 Professional Cameras Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Twist Lock Suction Cup Mount, Short Double Socket Arm & 1" Diameter Ball with Custom GoPro Hero Adapter The RAM-B-166-A-GOP1U consists of a 3.25" twist lock suction cup base, SHORT size double socket arm and 1" diameter ball with custom GoPro Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Compatible GoPro Cameras: All HD HERO Original + HD HERO2 Professional Cameras Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Track Ball™ Action Camera Mount The RAP-B-202-GOP1-354-TRA1U consists of a Track Ball™ base, double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment points at both ends of the double socket arm - allowing for high adjustibility to achieve perfect viewing angles. The GoPro® Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. This kit is compatible with virtually any track system including the RAM Tough-Track™.  Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in a poly bag. GoPro camera and black thumb screw not included with purchase.

RAM® Tough-Ball™ for Bronco Hood Tie-Down with Action Camera Adapter The RAM® Tough-Ball™ for Bronco Hood Tie Down with Action Camera Adapter (RAP-B-379-252062-2SLW-A-GOP1U) is an action camera mounting solution that installs on the Bronco Hood Tie Down. This kit includes a medium-length double socket arm, a 1" diameter ball with a custom GoPro® Hero adapter, and a 1" diameter rubber ball connected to a 1/4"-20 x.625" male threaded post. The included split lock washers ensure a secure connection in rugged environments when the RAM® Tough-Ball™ is used as an anchor point for a mounting system. This base replaces the OEM exposed bolts on the hood tie-down found on all Ford Bronco models, including the base model, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage, and Raptor. Features: Action camera adapter includes a 1" B-size RAM® rubber ball and is compatible with GoPro® and most other brands; attaches to the underside of cameras Includes RAM® Tough-Ball™ with 1/4"-20 x .625" threaded stud and two split lock washers Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (2) split lock washers Socket to Socket Length: 1.75" Thread Pitch: 1/4"-20 x .625" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: High-strength composite, stainless steel threads Packaging Type: Polybag Weight: 0.31 lbs Compatible Devices: GoPro: Hero, Session Garmin: Virb SJCAM: SJ4000, SJ5000X Elite 4K Muvi: veho K-Series K-2 Pro 4K Xcel: 1080C Vivitar: HD ACTIVEON: CX Gold Discovery: Kids Photo & Video Adventure Camera AEE: ACE S70 Black 16MP 2" AKASO: EK7000 4K WIFI Sports AEDILYS: 4K WIFI Sports Lightdow: LD4000 1080P HD WiMiUS: Q2 Black 1080P Wifi Vtin: 4k, WiFi