|
RAM Mount Composite Diamond Base w/1" Ball
Part #: RAP-B-238U
The RAP-B-238U, composite diamond base, contains a 1" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
5.71 |
|
|
RAM 2.43" x 1.31" Chrome Diamond Base w/1" Ball
The chrome plated base contains a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base.
Material:
Chrome Plated
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
20.36 |
|
|
RAM 2.5" Composite Round Base w/1" Ball
Part #: RAP-B-202U
The RAP-B-202U contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
6.29 |
|
|
RAM Chrome Motorcycle Brake/Clutch Reservoir Base w/1" Ball
The RAM-B-309-1CHU connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The chrome base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1CHU base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
34.28 |
|
|
Triple Magnetic 2.5" Round Base with 1" Ball
Consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base and triple magnetic base adapter. The 2.5" diameter base contains pre-drilled holes, including the universal AMPS hole pattern. The magnetic base adapter contains 3 rare earth magnets that hold firm to ferrous metals. Simply put this product near the mounting surface and feel it almost jump out of your hand. The composite adapter designed to conceal the magnets is made of durable composite to prevent scratching the mounting surface. Ideally suited for many applications, you're sure to find many ways to use your magnetic mount at work, home, on the go, or at play.
|
21.70 |
|
|
RAM 6.25" X 2" Rectangle Base with 1" Ball
The RAM-B-111BU consists 1" diameter rubber ball connected to a flat 6.25" x 2" rectangle base. The base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
The RAM-B-111BU is compatible with the following electronic devices:
Garmin GPSMAP 162
Garmin GPSMAP 168
Garmin GPSMAP 175
Garmin GPSMAP 180
Garmin GPSMAP 180C
Garmin GPSMAP 182
Garmin GPSMAP 185
Garmin GPSMAP 188
Garmin GPSMAP 232
Garmin GPSMAP 238
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. This plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
13.99 |
|
|
RAM Motorcycle Brake/Clutch Reservoir Cover Base with 1" Ball Offset
The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
19.54 |
|
|
RAM 2" x 2.25" Rectangle Base with 1" Ball
The RAM-B-202U-225 contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.
|
13.33 |
|
|
RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base w/ 1" Ball, Medium Arm and Diamond Ball Base
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/8" to 5/8” in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
Mounting Base Dimensions:
Accommodates rails 3/8" to 5/8" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
0.56 lbs.
|
37.92 |
|
|
RAM Mount Universal X-Grip Holder Diamond Base Surface Mount
Part #: RAM-B-102-UN7U
The RAM-B-102-UN7U consists of a double socket arm, diamond base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
48.52 |
|
|
Composite 3.25" Diameter Suction Cup Base w/1" Ball
The RAP-B-224-1U, composite twist lock mount consists of a 3.25" rubber base that is connected to the (RAP-B-238U), diamond base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.
Features:
Material: High Strength Composite
Ball Size: 1" Rubber Ball "B" Size
|
15.85 |
|
|
Torque™ 1-1/8" - 1-1/2" Diameter Handlebar/Rail Base w/1" Ball, Medium Arm & Diamond Ball Plate
Take your mobile entertainment on the road with the RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 1 1/8" to 1 ½” in diameter with a standard length double socket arm and B-sized ball and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
Mounting Base Dimensions: Accommodates rails 1-1/8" to 1-1/2" in diameter
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.64 lbs
|
38.71 |
|
|
RAM Flex Adhesive Base w/1" Ball
Part #: RAP-B-378U
Consists of a 2.5" composite base that connects to a 1" ball, double-sided adhesive PSA stick pad and sealed alcohol prep pad. This base will attach to all RAM double socket arms that will accommodate 1" ball bases.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. A secondary tether is recommended when this mount is used in high vibration environments.
|
12.34 |
|
|
2" x 2.5" Diameter Base w/1" Ball
The RAP-B-202U-225, high strength composite flat surface base, contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.
|
6.50 |
|
|
RAM STACK-N-STOW Topside Base w/1" Ball
The RAP-395W-BBU consists of a 1" ball, connected to a round base, that contains female grooves and hardware that will allow mounting to all RAM STACK-N-STOW Bait Boards.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
6.19 |
|