RAM 2.5" Round Base w/1" Ball & 1/4"-20 Male Post Part #: RAM-B-202AU The RAM camera base contains a 1" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. Compatible Cameras: Contour GPS Contour HD Gobandit GPS-HD GoPro HD Helmet HERO GoPro HD Motorsports HERO GoPro HD Surf HERO GoPro Helmet HERO Wide GoPro Motorsports HERO GoPro Motorsports HERO Wide GoPro RC HERO GoPro Surf Hero GoPro Wide HERO Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

Triple Magnetic 2.5" Round Base with 1" Ball Consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base and triple magnetic base adapter. The 2.5" diameter base contains pre-drilled holes, including the universal AMPS hole pattern. The magnetic base adapter contains 3 rare earth magnets that hold firm to ferrous metals. Simply put this product near the mounting surface and feel it almost jump out of your hand. The composite adapter designed to conceal the magnets is made of durable composite to prevent scratching the mounting surface. Ideally suited for many applications, you're sure to find many ways to use your magnetic mount at work, home, on the go, or at play.

RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 1/4"-20 Threaded Male Post for Cameras The RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Strap Clamp Roll Bar Mount w/Standard Length Double Socket Arm & 2.5" Round Base with 1/4"-20 Male Threaded Post The RAM-B-149Z-2-202AU consists of a steel strap base, u-bolt bases, double socket arm and 2.5" dia. round base with 1/4"-20 threaded post. Designed for a clean installation, the included roll bar base accommodates most common tubing sizes on UTV's and ATV's, allowing for the placement of the RAM rubber ball base. Safely concealing a strap clamp in a compact housing, you won't have to worry about exposed sharp edges or unwanted loosening. The camera base contains a 1" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1.5" x 2.5" Rectangle Base with 1" Ball The RAM-B-202U-1525 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.

Composite 3.25" Diameter Suction Cup Base w/1" Ball The RAP-B-224-1U, composite twist lock mount consists of a 3.25" rubber base that is connected to the (RAP-B-238U), diamond base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface. Features: Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size

RAM 2.5" Round Base (AMPs Hole Pattern) with 0.31-18 female thread & 1.5" Ball The RAM-202U-MT1 consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base with 0.31-18 female thread. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 3/8"-16 Threaded Male Post for Cameras The RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 3/8"-16 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 3/8"-16 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 2.5" Composite Round Base w/1" Ball Part #: RAP-B-202U The RAP-B-202U contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size

RAM 2" x 2.25" Rectangle Base with 1" Ball The RAM-B-202U-225 contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.

2" x 2.5" Diameter Base w/1" Ball The RAP-B-202U-225, high strength composite flat surface base, contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.

RAM 1.5" Diameter Ball Mount with Long Double Socket Arm & 2 2.5" Round Bases w/AMPs Hole Pattern The RAM-101U-D consists of a long double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your device. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

2.5" Round Base with 3/8"-16 Female Threaded Hol & 1.5" Ball The RAM-202CNSU consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base with 3/8"-16 female threaded hole. This mount has pre-drilled holes, including the universal AMPS hole pattern. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display Weight: 0.23 lbs.

RAM 2.5" Round Base w/Post & 2 1" Balls Color: Black Powder Coat Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball

RAM 1.5" x 2.5" Rectangle Base with 1.5" Ball The RAM-202U-1525 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.