RAM Yoke Clamp Mount w/Double Socket Arm & Diamond Base Adapter Part #: RAM-B-121-238U Consists of a double socket arm, universal diamond base and yoke clamp base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. The clamp base will accommodate rails in diameter from 0.625" to 1.25". The 1" rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Diameter Ball Double Socket Arm with Diamond Base Part #: RAM-B-103-238U The RAM-103-238U consists of a diamond base and double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Diameter Ball Short Double Socket Arm with Diamond Base. Overall Length: 3" The RAM-B-103-A-238U consists of a diamond base and SHORT double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position. Dimensions: Overall Length: 3" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Diameter Ball Long Double Socket Arm with Diamond Base. Overall Length: 6.62" The RAM-B-103-C-238U consists of a diamond base and LONG double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position. Dimensions: Overall Length: 6.62" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Composite Twist Lock Suction Cup with Double Socket Arm and Diamond Base Adapter The RAP-B-166U consists of a double socket arm, 3.25" suction cup twist lock base and diamond base adapter. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.

RAM 1" Diameter Ball Flat Surface Mount with Short Double Socket Arm, 2.5" Round Base & Diamond Base The RAM-B-138U-A consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, SHORT double socket arm and diamond base adapter. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. Overall Height: 3.09" Material: Powder Coated Marine Grade Aluminum Ball Size 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Diameter Ball Flat Surface Mount with Long Double Socket Arm, 2.5" Round Base & Diamond Base The RAM-B-138U-C consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, LONG double socket arm and diamond base adapter. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. Overall Height: 6.59" Material: Powder Coated Marine Grade Aluminum Ball Size 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Composite 1" Ball Short Length Double Socket Arm w/2.5" Round Base Including AMPs Hole Pattern The RAP-B-103U-A consists of a 2.5" round base and SHORT double socket arm that will accept 1" ball bases. The round base contains pre-drilled holes, including the universal AMPS hole pattern. Designed into the mount is a 1" diameter rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position. Dimensions: Overall Length: 3" Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.24 lbs.

Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter The RAP-B-400-238U consists of the small Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" Specifications/Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime Warranty! Made in U.S.A. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.35 lbs.

Medium Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter The RAP-B-404-238U consists of the medium Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.875" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 1" to 1.875" Clamping Range (Flat Surfaces): 0" to 1.6" Specifications/Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime Warranty! Made in U.S.A. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Double Socket Arm with Diamond Plate - B Size Medium  This mount consists of the 1.5" C-size diameter ball and socket system with one open socket end; the RAM-201U socket arm is the medium length at 5.69" end to end with 4.66" socket-to-socket length.  This mount is designed to be used with any of the C-size RAM Mount bases or cradles with a 1.5"-diameter rubber ball. The RAM-238U RAM Diamond Ball Base features an industry-standard AMPS 2-hole pattern and can be used as an adapter to attach a holder or a mounting drill-down base. Features: Diamond plate connects to RAM® device holders containing the universal AMPS 2-hole pattern Includes C size medium length double socket arm 5.69" end to end with 4.66" socket-to-socket length; ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Socket-to-Socket-Length (inch): 4.66" Hole Pattern (inch): 2-Hole AMPS 1.912" Plate Size (inch): 2.43" x 1.31" Ball Size (inch): C Size (1.5") Weight Capacity (Standard Use): 4 lbs  Weight Capacity (Heavy-Duty Use): 3 lbs Materials: Marine-grade aluminum Weight: 0.88 lb.

RAM Composite Twist Lock Suction Cup Mount w/ Diamond Adapter Description: The RAP-B-166-2U consists of a 2.75" suction cup twist lock base, double socket arm and diamond base adapter. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size

RAM 1" Diameter Ball Standard Length Double Socket Arm with 3.25" Diameter Suction Cup Twist Lock Base The RAM-B-166-103U consists of a 3.25" suction cup twist lock base, 1" ball diamond base and standard length double socket arm. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The socket arm is compatible with all 1" ball bases and adapters. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.

RAM® Tough-Claw™ Small Clamp Mount with Diamond Plate The RAM-B-400-238U consists of the small RAM® Tough-Claw™ base, marine-grade aluminum double socket arm, and diamond base adapter. The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, and odd-shaped rails and bars. The RAM® Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. The diamond base adapter contains the industry standard universal 2-hole AMPS hole pattern, which will connect to a large variety of RAM® Mount and third-party holders. The mount is designed with a RAM® 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. Features: Includes a small version of the RAM® Tough-Claw™ and medium length B size RAM® double socket arm with diamond plate features industry-standard AMPS pattern and measures 2.43" x 1.31" A small version designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surface Made of marine-grade aluminum, high-strength composite, and stainless steel hardware for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Clamp Range: .625" - 1.14" diameter Socket to Socket Length: 3" Hole Pattern: 2-Hole AMPS: 1.912" Plate Size: 2.43" x 1.31" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum and high-strength composite Packaging Type: Polybag Weight: 0.69 lbs

RAM Yoke Clamp Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad Part #: RAM-B-121-TAB3U The RAM-B-121-TAB3U consists of a double socket arm, universal diamond base, yoke clamp base and Tab-Tite™ cradle. The clamp base will accommodate rails in diameter from 0.625" to 1.25". Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the Tab-Tite™ mount to your optimum viewing position. The RAM Tab-Tite™ is compatible with the following tablets: Apple iPad Apple iPad 2 Apple iPad's with bumper or case including the Otterbox case HP TouchPad HP TouchPad's with bumper or case including the Otterbox case Tab-Tite™ Cradle Features: 1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size