RAM 2.5" Round Base with the AMPs Hole Pattern, 1" Ball & Hardware for the Garmin echo™ 100, 150 & 300c
The RAM-B-202-G4U consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Included are 3x (#8-32 x 5/8" PH PD Mach Screws) and 3x (#8-32 SS Nylock Nuts) that will connect the RAM-202-G4U to the bottom of the Garmin echo.
Compatible Devices:
Garmin echo 100
Garmin echo 150
Garmin echo 300c
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
11.05 | |
RAM 1" Ball Marine Electronic "LIGHT USE" Mount for the Garmin echo™ 100, 150 & 300c
The RAM-B-101-G4 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and round adapter base that attaches directly to the back of the Garmin echo. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo to the RAM Mount.
This mount is compatible with the following electronic devices:
Garmin echo 100
Garmin echo 150
Garmin echo 300c
Ball Size:
1" Rubber "B" Ball Size
Material:
Powder Coated Marine Grade Aluminum
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
31.26 | |
Protective Cover for echo™ 100, 150 & 300c
The protective cover fits snugly over the display of echo™ 100, 150 and 300c to help protect them when not in use.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.39 | |
Quick Release Mount for echo™ 100, 150 & 300c
Compatible with echo 100, 150 and 300c, this replacement mount features quick release capabilities and tilt/swivel for optimum viewing.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
10.79 | |
Summer Garmin echoMAP™
$100 Mail-In Rebate Offer valid now until August 2nd, 2015
Purchase a qualifying Garmin echoMAP™ 52, 53, 54, 55, 72, 73, 74, 75, 92, 93, 94 or 95 series now until August 2nd, 2015, and receive $100 via mail-in rebate.Don't miss out on these super savings!
Garmin echoMAP™ dv/sv Series
Easy to use, easy to install with the clearest scanning sonar. Experience the Power of Simple...fishing and the clearest scanning sonar on the water. The echoMAP™ dv series combos with 4", 5" or 7" displays offer traditional HD-ID sonar plus Garmin DownVü™ scanning sonar. The echoMAP™ sv series with 7" or 9" displays give you HD-ID sonar plus DownVü™ and SideVü™ scanning sonar. All come preloaded with either BlueChart® g2 U.S. coastal charts or U.S. LakeVü™ HD maps and 5Hz GPS.
|
||
RAM 2.5" Round Base with the AMPs Hole Pattern, 1.5" Ball & Hardware for Garmin's echo™ 200, 500c & 550c
The RAM-202-G4U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Included are 3x (#8-32 x 5/8" PH PD Mach Screws) and 3x (#8-32 SS Nylock Nuts) that will connect the RAM-202-G4U to the bottom of the Garmin echo.
Compatible Devices:
Garmin echo 200
Garmin echo 500c
Garmin echo 550c
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
|
16.36 | |
1.5" Ball "Rugged Use" Mount f/Garmin echo 200, 500c, & 550c
The RAP-101U-G4 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and round adapter base that attaches directly to the back of the Garmin echo. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo to the RAM Mount.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
39.83 | |
RAM Mount No Drill Vehichle System f/Nissan NV1500, NV2500HD, NV3500HD &
Toyota Tundra
This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation.
The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens)
The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Compatible Vehicles:
Nissan NV1500 (2011-2021)
Nissan NV2500 HD (2011-2020)
Nissan NV3500 HD (2011-2020)
Toyota Tundra (2007-2021)
Features:
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board.
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Material:
High Strength Composite and Powder Coated Steel
Notes:
If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.
|
311.86 | |
5" Stainless Steel Power Mount - 7" x 7" Base - f/Garmin/Raymarine 3G/4G Radar
Includes ADA-R1 modular top plate.
Seaview Stainless Steel Radar Mounts are 5" tall and aft leaning. The 7" x 7" base plate utilizes a small footprint, great for installations where space is limited. The body is made out of 316 stainless steel.
This Seaview stainless steel mount is also light bar compatible with Seaview stainless steel light bars. The stainless steel light bars come pre-wired and are USCG approved for boats up to 20 meters (65.6 ft.) in length.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
465.60 | |
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
||
RAM® EZ-Roll'r™ Locking Cradle for Garmin dezl™ OTR700
The RAM® EZ-Roll’r™ cradle for the Garmin dezl™ OTR700 provides a secure fit with hardware to lock the GPS device into place. With the included cradle lock as a theft deterrent, keep the Garmin dezl™ OTR700 protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle. Included is a set of two nuts and bolts to connect the cradle to any RAM® components or mounts that contain the universal AMPS hole pattern.
Features:
Form-fit cradle designed specifically for the Garmin dÄ“zl™ OTR700, securing your GPS while keeping all buttons and the power port fully accessible
Locks the device in place so it cannot be removed without the use of tools
Made of high-strength composite for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Hardware Included:
Assembly Hardware
(2) #8-32 x 5/8" Machine Screws
(2) #8-32 Nylock Nuts
(2) 4" Cable Ties
Specifications:
Hole Pattern: 2-Hole AMPS: 1.912"
Materials: High Strength Composite
Weight: 0.35lbs
|
18.88 | |
RAM® Vibe-Safe™ with NPT Adapter for 2-Hole Holders
The RAM® Vibe-Safe™ Adapter for 2-hole Holders (RAP-462NPT) is a vibration-damping accessory designed to protect electronic devices from a wide range of vibration frequencies. The RAM® Vibe-Safe™ is based on an NPT connection point and boasts the versatility to rotate between portrait and landscape while keeping the device secure in rugged environments. This adapter is compatible with most 2-hole RAM® holders, including the RAM® Quick-Grip™, RAM® Tough-Charge™, RAM® Quick-Charge™ & RAM® Form-Fit Holders. The RAM® Vibe-Safe™ is only compatible with the metal diamond ball adapter (RAM-B-238U).
Features:
RAM® Vibe-Safe™ dampens a wide range of vibration frequencies
NPT thread connection allows for rotation between portrait and landscape while remaining secure
Compatible with RAM® holders with a 2-hole AMPS hole pattern, and the metal diamond ball adapter (RAM-B-238U) for any B-size ball and socket mount
Unique structure and thoughtfully designed with all industries in mind
Backed by a lifetime warranty
Specifications:
Hardware Included: (2) #10-32 x 7/16" Machine Screws, (2) #8-32 x 1/2" Machine Screws, and (2) #8-32 Nylock Nuts
Product Dimensions: Overall Length: 3.38", Overall Width: 3", Overall Thickness: 1.36"
Hole Pattern: 2-Hole AMPS: 1.912"
Materials: High-strength composite
Packaging Type: Retail Bag
Weight: 0.3 lbs
|
28.90 | |
PowerPod Pre-Cut for Garmin ECHOMAP Plus 72sv, 73sv, 74sv, 75sv, 72cv, 73cv, 74cv & 75cv
PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.
PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.
NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.
Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.
All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.
PowerPods: Protection, Convenience, Security.
|
331.62 | |
GP1040-09 SystemPod Pre-Cut for Garmin echoMAP™ 92sv / 93sv / 94sv / 95sv & 1 Instrument
Instrument Cut Out:3.6" Hole
NavPod GP1040 Series for 9.5" Guard SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
The Commitment to Quality
NavPod is committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
*See Literature tab for an image with dimensions
|
401.44 | |
NavPod GP1500-01 SystemPod Pre-Cut f/Garmin echoMAP™ 7XSV/7XDV & Space On The Left f/9.5" Wide Guard GP1500-01 SystemPod Pre-Cut for Garmin echoMAP™ 7XSV/7XDV & Space On The Left for 9.5" Wide Guard
GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuard.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
331.62 | |