|
RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stc
The RAM-B-149Z-GA41 consists of a double socket arm, zinc coated u-bolt base, diamond adapter base and custom high strength composite cradle for the Garmin GPSMAP 62 series. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the motorcycle GPSMAP mount to your optimum viewing position. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter.
This mount is designed to hold the following devices:
Garmin Astro 320
Garmin GPSMAP 62
Garmin GPSMAP 62s
Garmin GPSMAP 62sc
Garmin GPSMAP 62st
Garmin GPSMAP 62stc
U-Bolt Dimensions:
0.50" to 1.25"
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
40.57 |
|
|
RAM Composite Twist Lock Suction Cup Mount for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stc
The RAP-B-166-2-GA41U consists of a double socket arm, suction cup twist lock base, diamond adapter base and custom high strength composite cradle for the Garmin GPSMAP 62 series. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the suction cup GPSMAP mount to your optimum viewing position.
This mount is designed to hold the following devices:
Garmin Astro 320
Garmin GPSMAP 62
Garmin GPSMAP 62s
Garmin GPSMAP 62sc
Garmin GPSMAP 62st
Garmin GPSMAP 62stc
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
29.60 |
|
|
RAM EZ-ON/OFF™ Bicycle Mount for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stc
Mount your Garmin GPSMAP quickly and easily with a RAM EZ-ON/OFF handlebar base. Designed to fit most common handlebar sizes, this compact and durable mount is ideally suited to the open road or trails. Uses common zip ties to attach to a variety of handlebar diameters. Made of high strength composite, it is light weight too. Adjustable to allow for the best viewing angle, this product is perfect for any cyclist and their compact electronic device. Mount includes 12 degree tappered shaft for tapered handlebars.
This mount is designed to hold the following devices:
Garmin Astro 320
Garmin GPSMAP 62
Garmin GPSMAP 62s
Garmin GSPAMP 62sc
Garmin GPSMAP 62st
Garmin GPSMAP 62STC
Material:
High Strength Composite
|
16.76 |
|
|
RAM ATV/UTV Strap Mount for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stc
Description:
The RAM-B-149Z-2-GA41U consists of a steel strap base, u-bolt bases, double socket, diamond adapter base and high strength composite cradle. Designed for a clean installation, the RAM strap mount will accommodate most common roll bar sizes on UTV's, allowing for the placement of the RAM rubber ball base. This mount can also be attached to smaller diameter handlebars on ATVs using the included hardware. With the ball base in place, you have the foundation for mounting everything from GPS Devices, RAM Aqua Boxes, Spotlights and Radios. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Rail Accommodation Dimensions:
Mount with Strap: 1.57" to a maximum of 3.15"
Mount with U-Bolt: 0.50" to a maximum of 1.25"
Compatible Devices:
Garmin Astro 320
Garmin GPSMAP 62
Garmin GPSMAP 62s
Garmin GPSMAP 62sc
Garmin GPSMAP 62st
Garmin GPSMAP 62stc
Material:
High Strength Composite
|
46.37 |
|
|
RAM Flat Surface Mount for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stc
Description:
The RAM-B-138-GA41U consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm, diamond adapter base and high strength composite cradle. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Compatible Devices:
Garmin Astro 320
Garmin GPSMAP 62
Garmin GPSMAP 62s
Garmin GPSMAP 62sc
Garmin GPSMAP 62st
Garmin GPSMAP 62stc
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
34.03 |
|
|
This RAM high strength composite cradle is designed to hold the following devices:
Garmin Astro 320
Garmin GPSMAP 62
Garmin GPSMAP 62s
Garmin GPSMAP 62sc
Garmin GPSMAP 62st
Garmin GPSMAP 62stc
Material:
High Strength Composite
|
9.90 |
|
|
RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with B Size 1" Ball, Short Arm and Diamond Plate
The RAM® Torque™ handlebar and rail mounting base has a 1” rubber ball and accommodates bars 1 1/8” to 1 1/2” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Included is a short double socket arm and a diamond plate for mounting to RAM mounting cradles.
Mounting Base Dimensions:
Accommodates rails 1 1/8” to 1 1/2” in diameter
|
37.26 |
|
|
RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with B Size 1" Ball, Short Arm and X-Grip® for Phones
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 1 1/8" to 1 ½” in diameter with a short length arm and the dynamic X-Grip® for phones. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Mounting Base Dimensions:
Accommodates rails 1 1/8” to 1 1/2” in diameter
Cradle Dimensions
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
|
57.42 |
|
|
RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm and X-Grip® for Larger Phones
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 1 1/8" to 1 ½” in diameter with a B-sized standard length arm and the dynamic X-Grip® for larger phones. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Mounting Base Dimensions:
Accommodates rails 1 1/8” to 1 1/2” in diameter
Cradle Dimensions
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded cradle expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Socket technology allows for multiple adjustment angles and articulation of device
6. Includes Tether for open cockpit and extreme environments
7. Lifetime warranty
8. Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
Weight:
0.78 lbs.
|
58.87 |
|
|
RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm and X-Grip® for 7-8" Tablets
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball that accommodates bars 1 1/8" to 1 ½” in diameter with a B-sized standard length arm and the dynamic X-Grip® for 7”-8” tablets. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Mounting Base Dimensions:
Accommodates rails 1 1/8” to 1 1/2” in diameter
Cradle Dimensions
Minimum Width = 2.5" (Minimum Height = 7")
Maximum Width = 5.75" (Minimum Height = 4")
Depth = 0.875"
Features:
1. Spring loaded cradle expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Socket technology allows for multiple adjustment angles and articulation of your tablet
4. Easy access grip knobs, located on the back of the cradle for quick release of your tablet
5. Includes Tether for open cockpit and extreme environments
6. Lifetime warranty
7. Rustproof
8. Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
RAM highly recommends using the provided Tether for all open cockpit applications while using this product. The "U" in the part number reflects product packaged in poly bag.
Weight:
0.86 lbs.
|
68.89 |
|
|
RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with B Size 1" Ball, Short Arm and GoPro®/Action Camera Mount
The RAM® Torque™ handlebar and rail mounting base has a 1” rubber ball and accommodates bars 1 1/8” to 1 1/2” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Included is a short double socket arm and a GoPro/Action Camera mount.
Mounting Base Dimensions:
Accommodates rails 1 1/8” to 1 1/2” in diameter
|
40.49 |
|
|
RAM® Form-Fit Cradle for Garmin GPSMAP® 176, 196, 276C, 396, 496 & More
The RAM-HOL-GA7U consists of a high-strength composite cradle and hole pattern that will allow attachment to all RAM components or mounts that contain the universal AMP hole pattern. Compatible and interchangeable with a wide range of popular RAM mounting products, this cradle is ready to complement a GPS and become the most useful accessory in a vehicle.
Features:
A set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMP hole pattern
Specifications:
Hardware Included: (2) #8-32 x 1/2" Machine Screws, (2) #8-32 x 5/8" Machine Screws, (2) #8-32 x 3/4" Machine Screws, and (2) #8-32 Nylock Nuts
Hole Pattern (inch): 2-Hole AMPS: 1.912"
Materials: High-strength composite
Packaging Type: Polybag
Weight: 0.14 lb.
Compatibility:
Garmin: GPSMAP 176, GPSMAP 176C, GPSMAP 196, GPSMAP 276C, GPSMAP 296, GPSMAP 376C, GPSMAP 378, GPSMAP 396, GPSMAP 478, and GPSMAP 496
|
10.27 |
|
|
RailMount Pre-Cut for Garmin GPSMAP 8410xsv & 8610xsv (Fits 1″ or 1.25″ Tubing)
*For Mounting on Starboard side of Pedestal Guard only
RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1” or 1.25” diameter tube. A Stainless Steel arm is used to mount the NavPod housing. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.
RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch chartplotters.
Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.
Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!
Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.
|
523.62 |
|
|
RailMount Pre-Cut for Garmin GPSMAP® 723, 723xsv, 743 & 743xsv
RailMount NavPods are best used for mounting an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1″, 1.125″, or 1.25″ diameter tube. A Stainless Steel arm is used to mount the NavPod housing. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm (available space is 0.75″ inside the narrowest part of the arm, so keep this in mind for planning your cable run; most transducer cables will not fit through the arm), and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without the replacement of the pedestal guard.
RailMounts are designed for all popular standard-size instruments, as well as 7 and 9-inch chartplotters.
Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.
Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!
Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.
|
471.26 |
|
|
RailMount Pre-Cut for Garmin GPSMAP® 923 & 943xsv
RailMount NavPods are best used for mounting an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1″, 1.125″, or 1.25″ diameter tube. A Stainless Steel arm is used to mount the NavPod housing. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm (available space is 0.75″ inside the narrowest part of the arm, so keep this in mind for planning your cable run; most transducer cables will not fit through the arm), and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without the replacement of the pedestal guard.
RailMounts are designed for all popular standard-size instruments, as well as 7 and 9-inch chartplotters.
Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.
Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!
Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.
|
479.99 |
|