|
The RAM peel and stick mount includes a composite, flex adhesive base. Peel off the adhesive back and stick the mount where it will work best for you. The RAM peel and stick mount is far and away the most discrete and clean way to mount most any compact electronic device to the dash of your vehicle. Once the snap link ball is inserted into the socket, the screw on the socket can be tightened, resulting in friction between the socket and the ball. This allowing you to move the mount and your device easily while still holding the position you leave it in.
|
16.73 |
|
|
RAM 2.5" Max Width Square Rail Base w/1" Diameter Ball
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
34.20 |
|
|
Composite 3.25" Diameter Suction Cup Base w/1" Ball
The RAP-B-224-1U, composite twist lock mount consists of a 3.25" rubber base that is connected to the (RAP-B-238U), diamond base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.
Features:
Material: High Strength Composite
Ball Size: 1" Rubber Ball "B" Size
|
15.85 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
Quick-Grip™ 15W Waterproof Wireless Charging Holder with Charger
The RAM® Quick-Grip™ Wireless is a patented, universal, water-resistant wireless charging cradle for phones. As part of the spring-loaded RAM® Quick-Grip™ family, this cradle allows for single-handed placement and removal of your phone while taking advantage of Qi-compatible wireless phone charging.
Both the top and bottom cups feature rubber to help hold your phone firmly in place. To insert your device, use your phone to push the top cup upward, and then gently place your device against the cradle for a secure fit. This Qi-compatible wireless charging cradle ensures your compatible phone charges as long as it’s within the listed compatible dimensions. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications.
This RAM® Quick-Grip™ Wireless kit for motorcycles includes a B-size diamond base featuring a 1" rubber ball, perfect for attaching to your choice of B-size RAM® double socket arm. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwired charger.
Features:
Waterproof Qi-compatible wireless phone charging cradle features a spring-loaded RAM® Quick-Grip™ design and 15W maximum output
Kit includes a wireless charging cradle, B-size diamond ball base, and hardwire charger; attaches to B-size double socket arms
Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments
RAM® Mounts are backed by a lifetime warranty, RAM® electronics are backed by a 1-year warranty with proof of purchase required
Specifications:
Hardware Included: (1) Safety Tether, (1) Silicon sleeve for USB waterproof connection, (1) Hardwire Charger with Cable, (4) Small zip ties, and (4) Large zip ties
Holder Dimensions (inch): Height Range: 5.625" - 6.625", Max Width: 3.125", Max Depth: .7"
Ball Size (inch): B Size (1")
Weight Capacity: Standard Use: 2 lbs / Heavy-Duty Use: 1 lbs
Materials: High-strength composite and stainless steel
Weight: 1.29 lb.
Power Specifications:
Input Power: 5V-2A; 9V-1.67A
Output: 15W
Conversion Efficiency: 85% Max
Maximum Case Thickness: 6mm
Working Frequency: 110-205KHZ
Product Standard: WPC v.1.2.4
Qi Compatible: Yes
Compatible with QC2.0/QC3.0 power supplies
Operating Temperature: 0°C to +37.7°C
Compliance: Over Voltage Protection, Short Circuit Protection, Reverse Polarity Protection, RoHS Compliance, WEEE Compliance, SAE J-1113-5 Load Dump (Transient Voltage), and Moisture Resistant
Certifications: CE Certification, KC, e-Mark Certification, RCM Certification, and FCC Certification
Warranty: 1 year
Compatible Devices:
Apple: iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 8, iPhone 8 Plus, iPhone SE, iPhone X, iPhone Xr, iPhone Xs, and iPhone Xs Max
Blackberry: Evolve X
Blackview: BV9900 and BV9900 Pro
Google: Pixel 3, Pixel 3 XL, Pixel 4, Pixel 4 XL, Pixel 5, Pixel 6, Pixel 6 Pro, Pixel 7, and Pixel 7 Pro
Huawei: Mate 20 Pro and P30 Pro
LG: G6, G6+, G7 ThinQ, G8 ThinQ, G8S ThinQ, V30, V35 ThinQ, V40 ThinQ, and V50 ThinQ
Nokia: 8 Sirocco and 9 PureView
Razer: Phone 2
Samsung: Galaxy Note 10, Galaxy Note 10 Plus, Galaxy Note 5, Galaxy Note 8, Galaxy Note 9, Galaxy S10, Galaxy S10 5G, Galaxy S10+, Galaxy S10e, Galaxy S20, Galaxy S20+, Galaxy S20 Ultra 5G, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 5G, Galaxy S22+ 5G, Galaxy S22 Ultra 5G, Galaxy S23, Galaxy S23+, Galaxy S23 Ultra, Galaxy S6, Galaxy S6 Edge, Galaxy S6 Edge+, Galaxy S7, Galaxy S7 Active, Galaxy S7 Edge, Galaxy S8, Galaxy S8+, Galaxy S8 Active, Galaxy S9, and Galaxy S9+
Sony: Xperia XZ2, Xperia XZ2 Compact, and Xperia XZ3
Xiaomi: Mi 9, Mi 9 Explorer, Mi Mix 2S, and Mi Mix 3
ZTE: Axon 9 Pro, Axon 10 Pro
|
141.62 |
|
|
RAM 2-7/16" X 1-5/16" Base w/Ball
Part #: RAM-238U
The powder coated marine grade aluminum base contains a 1.5" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
11.88 |
|
|
RAM 1.5" x 2.5" Rectangle Base with 1" Ball
The RAM-B-202U-1525 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.
|
22.93 |
|
|
RAM 2.43" x 1.31" Chrome Diamond Base w/1" Ball
The chrome plated base contains a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base.
Material:
Chrome Plated
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
20.36 |
|
|
RAM 1.5" x 2.5" Rectangle Base with 1.5" Ball
The RAM-202U-1525 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
24.30 |
|
|
RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm & X-Grip® for Phones
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/4" - 1" in diameter with the dynamic X-Grip® for phones. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Mounting Base Dimensions:
Accommodates rails 3/4" to 1" in diameter
Cradle Dimensions
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded cradle expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Socket technology allows for multiple adjustment angles and articulation of device
6. Includes Tether for open cockpit and extreme environments
7. Lifetime warranty
8. Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
58.58 |
|
|
11" x 3" Rectangle Universal Electronics Base with 2.25" Ball
The RAM-D-111BU, universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber "D" Ball Size
Weight: 1.25 lbs.
*Note: The "U" in the part number reflects product packaged in poly bag. This plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
45.34 |
|
|
RAM 1" x 1" U-Channel Clamp with 1" Ball
The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diamter arm socket and connection plates to create the perfect mount for your application.
Mount will attach to flat surfaces with the following dimensions:
Min: 4.4mm / 0.17"
Max: 28.0mm / 1.12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
24.47 |
|
|
RAM 1.5" Max Width Square Rail Base with 1" Diameter Ball
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
33.61 |
|
|
Tough-Charge™ 15W Waterproof Wireless Charging Holder with Charger
The RAM® Tough-Charge™ with X-Grip® Technology is the world's first patented, universal, waterproof wireless charging cradle for phones. Designed with spring-loaded RAM® X-Grip® Technology, this cradle features an 'X' design that expands and contracts to secure nearly any phone while taking advantage of Qi-compatible wireless phone charging.
All four arms feature rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches accessible on the sides of phones. To insert your device, simply squeeze the arms on one side of the cradle and place your phone inside before releasing the arms.
This Qi-compatible wireless charging cradle ensures your compatible phone charges no matter what position it’s placed at. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. In addition, a support leg can be adjusted to the ideal position or removed altogether. This RAM® Tough-Charge™ with X-Grip® Technology wireless charging kit for motorcycles includes a B-size diamond base featuring a 1" rubber ball, perfect for attaching to your choice of B-size RAM® double socket arm.
The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwired charger.
Features:
Waterproof Qi-compatible wireless phone charging cradle features spring-loaded RAM® X-Grip® technology and 15W maximum output
Kit for motorcycles includes a wireless cradle, a B-size diamond ball base, and a hardwired charger; it attaches to B-size double socket arms
Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments
RAM® Mounts are backed by a lifetime warranty and RAM® electronics are backed by a 1-year warranty with proof of purchase required
Specifications:
Hardware Included: (1) Safety Tether, (1) Glue Tube for Rubber Caps, (1) Cradle Leg, (1) Cradle Leg Cover, (1) Silicon sleeve for USB waterproof connection, (1) Hardwire Charger with Cable, (4) Small zip ties, and (4) Large zip ties
Holder Dimensions (inch): Width Range: 2.375" - 3.25", Depth Range: .875" max
Ball Size (inch): B Size (1")
Weight Capacity: Standard Use: 2 lbs / Heavy-Duty Use: 1 lbs
Materials: High-strength composite and stainless steel
Weight: 1.32 lb.
Warranty: 1 year
Power Specifications:
Input Power: 5V-2A; 9V-1.67A
Output: 15W
Conversion Efficiency: 85% Max
Maximum Case Thickness: 6mm
Working Frequency: 110-205KHZ
Product Standard: WPC v.1.2.4
Qi Compatible: Yes
Compatible with QC2.0/QC3.0 power supplies
Operating Temperature: 0°C to +37.7°C
Compliance: Over Voltage Protection, Short Circuit Protection, Reverse Polarity Protection, RoHS Compliance, WEEE Compliance, SAE J-1113-5 Load Dump (Transient Voltage), Moisture Resistant
Certifications: CE Certification, KC, e-Mark Certification, RCM Certification, FCC Certification
Compatible Devices:
Apple: iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 8, iPhone 8 Plus, iPhone SE, iPhone X, iPhone Xr, iPhone Xs, and iPhone Xs Max
Blackberry: Evolve X
Blackview: BV9900 and BV9900 Pro
Google: Pixel 3, Pixel 3 XL, Pixel 4, Pixel 4 XL, Pixel 5, Pixel 6, Pixel 6 Pro, Pixel 7, and Pixel 7 Pro
Huawei: Mate 20 Pro, P30 Pro
LG: G6, G6+, G7 ThinQ, G8 ThinQ, G8S ThinQ, V30, V35 ThinQ, V40 ThinQ, V50 ThinQ
Nokia: 8 Sirocco and 9 PureView
Razer: Phone 2
Samsung: Galaxy Note 10, Galaxy Note 10 Plus, Galaxy Note 5, Galaxy Note 8, Galaxy Note 9, Galaxy S10, Galaxy S10 5G, Galaxy S10+, Galaxy S10e, Galaxy S20, Galaxy S20+, Galaxy S20 Ultra 5G, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 5G, Galaxy S22+ 5G, Galaxy S22 Ultra 5G, Galaxy S23, Galaxy S23+, Galaxy S23 Ultra, Galaxy S6, Galaxy S6 Edge, Galaxy S6 Edge+, Galaxy S7, Galaxy S7 Active, Galaxy S7 Edge, Galaxy S8, Galaxy S8+, Galaxy S8 Active, Galaxy S9, Galaxy S9+
Sony: Xperia XZ2, Xperia XZ2 Compact, and Xperia XZ3
Xiaomi: Mi 9, Mi 9 Explorer, Mi Mix 2S, and Mi Mix 3
ZTE: Axon 9 Pro, Axon 10 Pro
|
146.44 |
|
|
The RAP-202U-225 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
|
9.56 |
|