The RAM-D-202U consists of a 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees and three holes at 120 degrees. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size

RAM® Round Plate with Ball - 2.25" - D Size Ball - Hole Plate The RAM-D-254-WD1U consists of a 2.25" diameter rubber ball, connected to a 2.5" diameter plate containing 7 holes total: the industry standard 4-hole AMPS hole pattern and a 3-hole 120-degree hole pattern. This component can drill down to any flat surface or connect to any RAM® holder or cradle. The D Size ball is compatible with any other RAM® D Size ball & socket components.  Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" 3-Hole 120-Degree: 1.812" Diameter  Features: Plate Size: 2.5" Diameter Ball/Socket Size: D Size (2.25") Materials: Marine-grade aluminum

RAM 3.68" Diameter Base w/3-3/8" Ball Part #: RAM-E-202U The RAM-E-202U consists of a 3.38" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees and three holes at 120 degrees. Material: Powder Coated Marine Grade Aluminum Ball Size: 3.38" Rubber Ball "E" Size

RAM 3.68" Diameter Base w/Ball The (RAM-240U), marine grade aluminum base, consists of a 1.5" diameter rubber ball connected to a flat 3.68" diameter base. This base has pre-drilled holes that connects to RAM Tough-Dock Powered Docking Stations. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 75mm x 75mm VESA 3.625" Plate w/ 2.25" Diameter Ball This RAM-D-2461U consists of a 2.25" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. The

The 2.25" D Size Balls from Ram Mount

Double U-Bolt Base with D Size 2.25" Ball for Rails from 1.25" - 1.5" in Diameter The RAM-D-235-1U consists of a double u-bolt base with 2.25" diameter ball and two zinc-coated u-bolts. The double u-bolt base will accommodate rails from 1.25" to 1.5" in diameter. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" D-Size Ball Note: The "U" in the part number reflects product packaged in poly bag. This mount includes zinc coated u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt. Weight: 0.54 lbs.

The RAM-D-201U powder coated marine grade aluminum 6.88" double socket arm allow for connnection to a 2.25" diameter ball. Socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 8.375" Socket-To-Socket Length: 6.5625" Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size

2" x 5" Rectangle Base with 2.25" Ball The RAM-D-202U-25 consists of a 2.25" diameter rubber ball connected at right angles to a 2" x 5" rectangular base. This mount has pre-drilled holes at each corner of the base. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball Size Weight: 0.69 lbs.

11" x 3" Rectangle Universal Electronics Base with 2.25" Ball The RAM-D-111BU, universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size Weight: 1.25 lbs. *Note: The "U" in the part number reflects product packaged in poly bag. This plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

2" x 3" Rectangle Base with 2.25" Ball Contains a 2.25" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base.

RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.68" Round Base The RAM-316-3-240U consists of the RAM POD III No-Drill vehicle base, three rigid aluminum rod legs, double socket arm, 2.5" round bases that contain the universal AMPs hole pattern and 3.68" round base. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The 3.68" round base contains pre-drilled holes that connect to RAM Tough-Dock Powered Docking Stations. Leg Lengths: 18", 20" and 30" Installation Instructions: At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Universal D Size Ball Mount with Short Arm for 9"-12" Fishfinders and Chartplotters The RAM-D-115-C consists of a base with a 2.25” diameter D size ball, a short arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more. Overall Length: 7.325" Weight Capacity: Up to 10 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size

Universal D Size Ball Mount with Short Arm and Hi-Torq™ Wrench for 9"-12" Fishfinders and Chartplotters The RAM-D-115-C-KNOB9H consists of a base with a 2.25” diameter D size ball, a short arm, a Hi-Torq™wrench and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. For cold weather environments, the included Hi-Torq wrench helps to tighten the knob on the arm for a secure hold. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more. Overall Length: 7.325" Weight Capacity: Up to 10 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size

RAM Mount 2.25" Ball Mount with 3.68" Round Base & 2" x 5" Rectangular Base for Humminbird HELIX 9, 10 & 12 The RAM-D-202-25-C-202, powder coated marine grade aluminum mount, consists of a double socket arm, one round 3.68" diameter round base and one 2" x 5" rectangular plate. The round plate contains two mounting holes at 180-degrees and three mounting holes at 120-degrees. The rectangular plate contains a 4-hole pattern of 1.5" x 4.5". The patented rubber ball and socket technology dampens shock and vibration, and allows for nearly infinite adjustability, So you can set your device at the perfect veiwing angle, while suited for any rugged environment. Compatible Devices: Humminbird Helix 9 Humminbird Helix 10 Humminbird Helix 12 Specifications: Overall Length: 7.875" Weight Capacity: Up to 15 lbs. Weight: 3.07 lbs.