|
RAM Sealed Enclosure Medium/Wide Size AQUA BOX®
Aqua Box 6 Internal Dimensions:
Width=4", Height=6", Depth=1.75" inches
Aqua Box 6 External Dimensions:
Width=5.25", Height=6.5", Depth=2" inches
Features:
1. A unique, all inclusive seal and Flex-Lens. This is really cool stuff!
2. Touch through lens to operate buttons.
3. Power, earphone and accessory cables are routed through a self draining baffledesign to keep moisture out.
4. Fits any RAM Mounting System for use on Planes, Motorcycles, Boats, ATVs, Bikes, etc.
5. Easily locks with any standard mini padlock.
6. All marine grade construction including stainless steel hinge pin and mounting hardware.
7. Flex-Lens may be replaced in seconds if scratched or damaged. (inexpensive)
8. Lifetime Warranty on all components other than Flex-Lens.
Installation Instructions:
The face of the Aqua Box 6 is a door, allowing you to place your electronic device in the cradle. If required, you can lock the box, with a small padlock, once closed. Inside the RAM Aqua Box are padded sheets enabling you to place your electronic device in the box firmly and securely. You can punch out the back of the Aqua Box to allow cables you be connected to you device, while maintaining a waterproof environment.
Important Note:
Apple iPhone and iPod touch screens are not operable through the RAM Flex Lens while in the Aqua Box.
|
51.08 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
RAM Universal Medium Tough-Clamp with 1" Diameter Rubber Ball
An extra pair of hands is something that almost everyone has wished for at some point. The RAM Tough-Clamp is the solution. This extremely versatile product from RAM has endless applications and will certainly become one of your most valued tools. The RAM Tough-Clamp includes a 1" ball which can be used to mount a variety of products utilizing RAM's vast selection of mounting solutions. Attach your GoPro Camera, Smartphone, RAM AQUA BOX Pro or similar light weight device on almost any flat surfaces and square rails.
Clamping Dimensions:
Flat surfaces and square rails from 0" to 1.75" thick
Round rails from 0.75" to 1.125" OD
Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Swiveling jaw-end pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
1" rubber ball is compatible with numerous RAM arms and mounts
Small, sleek form factor that accommodates for small, tight spaces
Built-in lanyard holes
Quick engage and release of clamp
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
23.15 |
|
|
Women's Moxie Foam Vest - Aqua/Slate - Medium/Large
This classic high-back front entry women's specific foam vest is designed to clear most kayak seatbacks. Mesh panels keep you cool, and the Adjust-a-Bust system provides support for long-lasting comfort. Removable underbust memory foam pads combined with adjustable shoulders mimic the support of a sports bra, while eight adjustment points throughout allow for a customizable and secure fit. Two expanding mesh pockets and sunglass loops keep your gear securely within reach. Safety features include reflective trim on the front, back, and shoulders and a tethered whistle.
Features:
Front entry with a buckle for convenient donning and doffing
300D polyester shell is soft and durable
Women’s specific fit has eight points of adjustment
Mesh high-back design increases breathability and clears seatbacks
Adjust-a-Bust fit system provides support and prevents riding-up
Two expanding zippered mesh pockets keep personal items handy
Daisy chain attachments secure essentials
Lash tab for affixing gear
Sunglass loops offer a snug storage solution
Reflective trim on the front, back, and shoulders enhances visibility in low light conditions
Tethered signal whistle for emergencies
Certifications:
U.S.C.G. - UL1123 - Marine Buoyant Devices 160.064 - Type III
Technical Specifications:
Color - Slate/Aqua
Size - Medium/Large
Chest Size - 36' to 46" (91 to 117 cm)
Weight Capacity - ≥ 90 lb (≥ 41 kg)
*Sold as an Individual
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
131.99 |
|
|
Jig Box - Medium
The Rapala Jig Box is the perfect place to store and protect your jigs!
Features:
Heavy-Duty Four-Sided Tackle Storage
Waterproof Seal
High Compression Hook Clips
Slotted Compression Foam for Protection or Extra Jig Storage
Dimensions: 6.75" x 4.00" x 2.00"
Size: Medium
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.44 |
|
|
RAM Double Socket Arm with Diamond Plate - B Size Medium
This mount consists of the 1.5" C-size diameter ball and socket system with one open socket end; the RAM-201U socket arm is the medium length at 5.69" end to end with 4.66" socket-to-socket length.
This mount is designed to be used with any of the C-size RAM Mount bases or cradles with a 1.5"-diameter rubber ball. The RAM-238U RAM Diamond Ball Base features an industry-standard AMPS 2-hole pattern and can be used as an adapter to attach a holder or a mounting drill-down base.
Features:
Diamond plate connects to RAM® device holders containing the universal AMPS 2-hole pattern
Includes C size medium length double socket arm 5.69" end to end with 4.66" socket-to-socket length; ball and socket technology allows for near-infinite adjustability
Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Socket-to-Socket-Length (inch): 4.66"
Hole Pattern (inch): 2-Hole AMPS 1.912"
Plate Size (inch): 2.43" x 1.31"
Ball Size (inch): C Size (1.5")
Weight Capacity (Standard Use): 4 lbs
Weight Capacity (Heavy-Duty Use): 3 lbs
Materials: Marine-grade aluminum
Weight: 0.88 lb.
|
32.04 |
|
|
RAM Combination Strap, Handlebar, Rail Mount with Double Socket Arm & Adapter Base for UTVs & ATVs
Description
The RAM-B-149Z-2U consists of a steel strap base, u-bolt bases, double socket arm and diamond adapter base. The diamond adapter base has a hole pattern that matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. With a twist of the arm knob, you can move the mount to your optimum viewing position. Designed for a clean installation, the RAM strap mount will accommodate most common roll bar sizes on UTV's, allowing for the placement of the RAM rubber ball base. This mount can also be attached to smaller diameter handlebars on ATVs using the included hardware. With the ball base in place, you have the foundation for mounting everything from GPS Devices, RAM Aqua Boxes, Spotlights and Radios.
Rail Accommodation Dimensions:
Mount with Strap: 1.57" to a maximum of 3.15"
Mount with U-Bolt: 0.50" to a maximum of 1.25"
Material:
Powder Coated Marine Grade Aluminum
|
38.71 |
|
|
RAM ATV/UTV Strap Mount for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stc
Description:
The RAM-B-149Z-2-GA41U consists of a steel strap base, u-bolt bases, double socket, diamond adapter base and high strength composite cradle. Designed for a clean installation, the RAM strap mount will accommodate most common roll bar sizes on UTV's, allowing for the placement of the RAM rubber ball base. This mount can also be attached to smaller diameter handlebars on ATVs using the included hardware. With the ball base in place, you have the foundation for mounting everything from GPS Devices, RAM Aqua Boxes, Spotlights and Radios. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Rail Accommodation Dimensions:
Mount with Strap: 1.57" to a maximum of 3.15"
Mount with U-Bolt: 0.50" to a maximum of 1.25"
Compatible Devices:
Garmin Astro 320
Garmin GPSMAP 62
Garmin GPSMAP 62s
Garmin GPSMAP 62sc
Garmin GPSMAP 62st
Garmin GPSMAP 62stc
Material:
High Strength Composite
|
46.37 |
|
|
Medium Tough-Claw™ Base w/Double Socket Arm & 1.5" Round Base Adapter
The RAP-404-202U consists of the small Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 1.875" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 1.875"
Clamping Range (Flat Surfaces):
0" to 1.6"
Specifications/Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
71.12 |
|
|
LED Spotlight Mount with Medium Size Tough-Claw™
The RAM Mounts LED Spotlight has been completely redesigned. We have integrated a new LED bulb that yields a brighter and more efficient light that enables you to add safety and lower power draw to your ATV, boat or vehicle. The weather-resistant body shields the 30° spot light LED bulb, which yields a wider and brighter range of light, from the elements. The long cord with standard 12v plugin means you can mount the light from nearly any location.
The RAM-B-152-404 includes the Medium RAM® Tough-Claw; the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.875" outer diameter. Perfectly suited for mounting on any handlebars, roll bars and much more, the RAM® Tough-Claw™ with LED Spotlight will soon become another essential RAM® component in your collection of mounting options.
Clamping Range (Rail/Tube Surfaces):
1" to 1.875"
Clamping Range (Flat Surfaces):
0" to 1.6"
Bulb Specifications:
PAR36
12 Volts DC
9 Watts
1900 Lumens
Sealed Beam
30-Degree Spot Light
Frosted Lens
4500K Color Temp
Tough-Claw™ Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime Warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
115.80 |
|
|
RAM® Twist-Lock™ Suction Cup Mount for Apple iPad mini 4 & 5
Ideal for aircraft windshields, the RAM® EZ-Roll'r™ cradle is designed specifically for a caseless Apple iPad mini 4 and iPad mini 5 consisting of a 3.3" diameter RAM® Twist-Lock™ suction cup base and medium-length double socket arm. The mount is designed with a RAM® 1" diameter B size patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles.
Features:
RAM® EZ-Roll'r™ cradle specifically designed for a caseless Apple iPad mini 4 and iPad mini 5
Includes RAM® Twist-Lock™ suction cup base for mounting to windshields and other nonporous surfaces as well as a B-size medium socket arm
Made of powder-coated, marine-grade aluminum and high-strength composites for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware
Suction Size: 3.3" Diameter
Socket to Socket Length: 3"
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2lbs/Heavy Duty Use: 1lb
Materials: Marine-grade aluminum, high-strength composite
Weight: 0.87lb
Compatibility:
Apple iPad mini 4
Apple iPad mini 5
|
48.68 |
|
|
RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm and Diamond Ball Base
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/4" to 1" in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
Mounting Base Dimensions:
Accommodates rails 3/4" to 1" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
38.38 |
|
|
RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base w/ 1" Ball, Medium Arm and Diamond Ball Base
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/8" to 5/8” in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
Mounting Base Dimensions:
Accommodates rails 3/8" to 5/8" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
0.56 lbs.
|
37.92 |
|
|
RAM Transducer Arm Mount with Male Wedge Base and 1" Ball: Compatible with Hobie and Scotty Wedge Hole Bases
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable transducer arm for kayaks. This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your transducer from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the arm can quickly be moved to a different kayak and attached to an existing flush mount or 1" RAM ball. The unique design provides a universal solution for virtually any kayak as well as any transducer.
Compatible Transducers:
The RAM transducer arm mount is compatible with all transducers that contain a 1/4" screw.
Features:
1. 18" rigid aluminum rod can be bent to position your transducer to its optimum viewing location
2. Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm
3. Quality materials prevent corrosion and keeps your transducer arm mount
4. Compatible with Hobie and Scotty wedge bases
5. Lifetime warranty
Material:
High Strength Composite and Aluminum Steel
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.
|
54.77 |
|
|
RAM Transducer Arm Mount with Open Single Socket: Compatible with all RAM 1" Ball Bases
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable transducer arm for kayaks. This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your transducer from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the arm can quickly be moved to a different kayak and attached to a 1" RAM ball. The unique design provides a universal solution for virtually any kayak as well as any transducer.
Compatible Transducers:
The RAM transducer arm mount is compatible with all transducers that contain a 1/4" screw.
Features:
1. 18" rigid aluminum rod can be bent to position your transducer to its optimum viewing location
2. Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm
3. Quality materials prevent corrosion and keeps your transducer arm mount
4. Lifetime warranty
Material:
High Strength Composite and Aluminum Steel
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.
|
44.42 |
|