RAM 2-7/16" X 1-5/16" Base w/Ball Part #: RAM-238U The powder coated marine grade aluminum base contains a 1.5" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Unpackaged Ram Wedge Mount Keeping things simple and versatile, the new RAM Ball Wedge Mounts are a great way to provide a mounting point to practically anything. Simply slide the wedge into the round opening of your rod holder base and tighten the screw. The new RAM Ball Wedge Base expands to accommodate holes from 7/8"- 1" diameter and locks in tight. Once installed, you have the perfect way to mount anything from RAM Rod holders, GPS, Cell Phone, Cup Holder, Fishfinder, or Flash Light which can all be supported and perfectly positioned using this great new product. Features: Compatible With: Scotty bases, Hobie Kayaks with sail mount ports 7/8"-1" diameter Material: High Strength Composite Ball Size: 1.5"

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

POD No-Drill™ Vehicle Mount with Netbook Tray & 1.5" Ball This kit includes the RAM-234-6 with the RAM POD I with a 1" diamter ball and socket. This universal vehicle mounting base quickly and easily installs into a variety of vehicles and other applications. The RAM POD I has a maximum extension of 18" but can be cut to desired length. The black steel foot can be attached to the inside seat rail bolt of the passenger or any existing bolt. Tray Dimensions: Tray Depth: 6.0" Tray Thickness: 1" Tray Width (Expansion): 8.56" to 11.12" Side Clamp Arm Height: 2.75" max Features: Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag

RAM® Level Cup™ XL with 1.5" Ball Designed for bigger insulated cups, plastic water bottles, or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL with a C-size RAM® Mounts ball directly attached. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sizes of cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full. Specifications: Drink Size: 12-32 oz Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496" Ball Size (inch): C Size (1.5") Weight Capacity (lbs): Standard use: (2 lbs) / Heavy-duty use: (1 lb) Materials: High-strength composite Packaging Type: Retail bag Weight (lbs): 0.67 lb. Hardware Included: (3) Rubber Support Fins (1) Glue Tube for Rubber Fins

Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with C Size 1.5" Ball The RAM® Torque™ handlebar and rail mounting base has a 1.5” rubber ball and accommodates bars 3/4” to 1” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Mounting Base Dimensions: Accommodates rails 0.75" to 1" in diameter Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball "C" Size Note: The "U" in the part number reflects product packaged in poly bag.

Bosworth 1.5 Inch Threaded Inlet Bronze  

Bosworth 1.5 Inch Threaded Oulet Bronze  

RAM Transducer Arm Mount with Male Wedge Base and 1" Ball: Compatible with Hobie and Scotty Wedge Hole Bases Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable transducer arm for kayaks. This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your transducer from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the arm can quickly be moved to a different kayak and attached to an existing flush mount or 1" RAM ball. The unique design provides a universal solution for virtually any kayak as well as any transducer. Compatible Transducers: The RAM transducer arm mount is compatible with all transducers that contain a 1/4" screw. Features: 1. 18" rigid aluminum rod can be bent to position your transducer to its optimum viewing location 2. Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm 3. Quality materials prevent corrosion and keeps your transducer arm mount 4. Compatible with Hobie and Scotty wedge bases 5. Lifetime warranty Material: High Strength Composite and Aluminum Steel Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.

162 1.5" Ball Mount with Gear Head Post & 241 Side Deck Mount The latest edition to Scotty's ball mounting system is the 1.5” ball mount. Features: The bigger ball design gives you a much greater clamping force for larger accessories while still having a smooth full range of motion  Click and lock any Scotty post mount accessory into the Gear Head  Designed for use with Scotty Baitcaster Spinning & Fly Rod Holders Dimensions: Base Mount Dimensions: 2” x 4” Mount Height Stands: 10” Tall

The RAM-HOL-AP17U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. Compatible Devices (WITHOUT CASE): Apple iPad Air Specifications: Docking Cradle: No Locking Cradle: No Fit's Tablet's WITH Cases: No Fit's Tablet's WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty 6. Made in U.S.A. Material: High Strength Composite

163 1.5" Ball Mount with Fishfinder & Universal Mounting Plate The latest edition to Scotty's ball mounting system is the 1.5” ball mount. Features: The bigger ball design gives you a much greater clamping force for larger accessories while still having a smooth full range of motion The 163 top plate has been designed to accept large fish finders Dimensions: Base Mount Dimensions: 2 ¼” x 2 ¼” Mount Height Stands: 6.5” Tall

RAM 1.5 Inch Ball Base with Strap 0.5 Inch to 2 Inch Diameter The RAM-108B consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM-ROD 1.5" Diameter Ball & Hardware f/RAM 5 Spot Mounting Base Color: Black Material: High Strength Composite

RAM Spotlight Base w/3/8"-16 Post The RAM-236U consists of a 1.5" diameter rubber ball, connected to a 3/8"-16 thread. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.