Corrosion resistant twist-action plug for mounting from inside the transom. Adjusts to provide tightest possible seal, won't jar loose under vibration. Designed for use with Moeller drain tubes.

Corrosion resistant cam-action plug for mounting only from inside the transom. Adjusts to provide tightest possible seal, won't jar loose under vibration. Designed for use with 1" Moeller drain tubes.

Marine Plumbing & Ventilation The plumbing and ventilation systems are two of the most important aspects of your boat. It is very important that any toilet facilities work properly, and you also need to ensure that there is adequate ventilation for the engine and to remove any fumes that can build up in passenger compartments or similar areas. With our marine plumbing and ventilation parts and accessories, you have what you need all in one place, right at your fingertips. From air conditioning & refrigeration supplies to bilge pumps, fans, and hot water heaters, we have it all under one roof.   We carry several brands and can offer Livewell pumps and transfer pumps, along with several marine sanitation options. Portable toilets are an excellent choice for boats that are large enough to accommodate them, but the comfort of your passengers is not the only thing to be aware of. You also need to make sure you have adequate engine cooling pumps, and that any washdown / pressure pumps work correctly. With a WaterMaker pump, quality fittings, and the right blowers & heaters for your boat, you can ensure that your boat will operate correctly and your passengers will have the comfort and convenience they need.

Corrosion resistant cam-action plug for mounting only from inside the transom. Adjusts to provide tightest possible seal, won't jar loose under vibration. Designed for use with 1" Moeller drain tubes.

Corrosion resistant cam-action plug for mounting only from inside the transom. Adjusts to provide tightest possible seal, won't jar loose under vibration. Designed for use with 1" Moeller drain tubes.

ALTUS Ventilation Hatch - OD 13-1/8" x 13-1/8" ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight. They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate. Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position. The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”. An aluminum counter flange and a mosquito screen are available for these hatches. Features: External Dimensions -  13 1/8" x 13 1/8" Cut Out Dimensions - 10 1/4" x 10 1/4"  Number of Handles - 1 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Shurflo 244-5286 3/8Npt-M X 1/2Npt-M Ce Adapter Fitting, 3/8" NPT Male x 1/2" NPT Male

Hypro 3300-0002, 1/2" M X 1/2" F Bronze Relief Valve 200 PSI Ports-NPT Inlet (M) Outlet (F): 1/2" M x 1/2" F Max PSI: 200 Body Material: Cast Bronze Valve Material: Stainless Steel Ball

March TE-7S-MD 1.5hp 3 phase March Pump's industrial TE-7S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 57.5 Feet (or around 25PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1-1/2 inch female pipe thread, and the outlet is 1 inch male pipe thread. There are two standard motors. The first is a 1 Phase 60 hertz 115/208/230V and 50 hertz 110/220V 1 horsepower totally enclosed fan cooled motor.  The second is a 3 Phase 60 hertz 208/230/460V and 50 hertz 190/380V 1 horsepower totally enclosed fan cooled motor. There are performance differences between the hertz options. The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-7S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-7S-MD is suitable for your application, please contact March Pump.   Perfect for Applications Including; Applications for the TE-7S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.   Great for Chemicals Including The TE-7S-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride,  Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals.     Unit 60HZ 50HZ System US Metric US Metric Max Flow 53 GPM 200 LPM 47.5 GPM 180 LPM Max Head 57.5 FT 17.5 M 39.4 FT 12 M Power 1 HP .745 KW 1 HP .745 KW Electrical 1PH 115/208/230V 60HZ, 110/220V 50HZ or 3PH 208/230/460V 60HZ, 190/380V 50HZ On 50HZ, the Single Phase Motor is rated for 1 horsepower or 0.7457 kilowatts. On 50HZ, the Three Phase Motor is rated for 1 horsepower or 0.7457 kilowatts.     Type Centrifugal Mag Drive Inlet 1-1/2"FPT Outlet 1"MPT Wet End 316 Stainless Steel (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing) Motor Options Available in 1HP, 1.5HP, 1HP Explosion Proof or 1.5HP Explosion Proof P/N 0155-0173-0300 (1 Phase 1HP) with Metal Motor Bracket P/N 0155-0174-0300 (3 Phase 1HP) with Metal Motor Bracket P/N 0155-0036-0300 (3 Phase 1.5HP) with Metal Motor Bracket P/N 0155-0285-0100 (1 Phase 1HP) with Plastic Motor Bracket P/N 0155-0286-0100 (3 Phase 1HP) with Plastic Motor Bracket P/N 0155-0287-0100 (3 Phase 1.5HP) with Plastic Motor Bracket  

Applications for the TE-7S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.    March Pump's industrial TE-7S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 57.5 Feet (or around 25PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 1 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-7S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Unit System 60Hz 50Hz Max Flow 53 GPM 180 LPM Max Head 57.5 FT 12 M Power 1 HP .745 KW Electrical 1Ph 115/230V or 3Ph 230/460V 50/60HZ     Type Centrifugal Mag Drive Inlet 1-1/2"FPT Outlet 1"MPT Wet End 316 Stainless Steel (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing) Motor Options Available in 1HP, 1.5HP, 1HP Explosion Proof or 1.5HP Explosion Proof

  FLIR is excited to announce the launch of the FLIR M-Series Thermal Promotion! For a limited time, save $1,000 on select M-Series stabilized thermal cameras.   Navigate at night like a pro with the enhanced situational awareness and peace of mind a FLIR M-Series camera brings aboard.  Hurry in to your authorized FLIR dealer and add a FLIR M-Series camera to your boat. The M-Series $1,000 rebate runs through July 7th, 2019 and is valid on the following M-Series models: M-324CS, M-625S, M-625CS and M-617CS.  *Offer valid now until July 7th, 2019     Specials    Closeouts   Remanufactured    Rebates  

  FLIR is excited to announce the launch of the FLIR M-Series Thermal Promotion! For a limited time, save $1,000 on select M-Series stabilized thermal cameras.   Navigate at night like a pro with the enhanced situational awareness and peace of mind a FLIR M-Series camera brings aboard.  Hurry in to your authorized FLIR dealer and add a FLIR M-Series camera to your boat. The M-Series $1,000 rebate runs through July 7th, 2019 and is valid on the following M-Series models: M-324CS, M-625S, M-625CS and M-617CS.  *Offer valid now until July 7th, 2019     Specials    Closeouts   Remanufactured    Rebates  

Designed to seal air chamber under deck. Just pop in for a secure, tight fit. Can also be used as livewell or baitwell plug. Bulk.

Rating: 35 Amps @ 6 v; 20 Amps @ 12 v. Two position off/on. All brass with nickel plated brass face nut and brass back-up nut. Mounting stem 3/8" long, 7/16" dia. 7/16-28 thread.

High quality brass bulkhead fitting for fuel line.