Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

For venting of bilge gases. Ozone & sunlight resistant. Will not support a flame. Black wire vinyl coated. 50 ft. rolls are sold by 50 ft. roll, but priced by the foot.

Marine Grade Spiral Wrap 1/4" x 10' Features: Permits flexible routing of cable harnesses Provides abrasion protection for wire and cable Allows lead-outs at any point for the greatest ease of installation Split loom temperature range is -40°F to 275°F / -40°C to 135°C WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

For venting of bilge gases. Ozone & sunlight resistant. Will not support a flame. Black wire vinyl coated. 50 ft. rolls are sold by 50 ft. roll, but priced by the foot.

Oberdorfer 2525.1 Hex Screw 1/4 X 20 X 3/4 Ss  

Groco Sse-4003-1 Ss Strainer  

2305 MiniBus 100 Ampere Common BusBar 4 x 10-32 Stud Terminal Features: Great for limited space applications in electronics cabinets and under dashboards WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MiniBus 100 Ampere Common BusBar 4 x 10-32 Stud Terminal with Cover PN:  2315 Great for limited space applications in electronics cabinets and under dashboards Snap on insulating cover attaches to studs and allows unobstructed wire access Raised bus provides easy access to multiple wires on a single screw Pressed on busbar eliminates the need for a securing nut Stainless steel studs allow high torquing for excellent electrical contact Tin-plated copper bus for maximum conductivity and corrosion resistance Recessed mounting holes eliminate accidental shorts to aluminum and steel mounting surfaces Captive star type lock washers meet CE requirements for anti-rotation and eliminate handling of small, easily dropped parts = Stainless steel Phillips screws for easier installation and resistance to stripping UL 94-VO rated base material resists high heat Continuous Amperage 100 Amperes AC/DC Maximum Voltage Rating 300 Volts AC/48 Volts DC Bus Material Tin-Plated Copper CDA 110/UNS11000 Base Material Reinforced Polycarbonate Cover Material Clear Polycarbonate Weight 0.17 Lb WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Self-Extinguishing Split Loom 3/4" x 10' Features: Permits flexible routing of cable harnesses Provides abrasion protection for wire and cable Allows lead-outs at any point for the greatest ease of installation Split loom temperature range is -40°F to 275°F / -40°C to 135°C WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Grade Spiral Wrap 3/4" x 10' Features: Permits flexible routing of cable harnesses Provides abrasion protection for wire and cable Allows lead-outs at any point for the greatest ease of installation Split loom temperature range is -40°F to 275°F / -40°C to 135°C WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.

Corrugated hose resists gasoline/alcohol blend. Corrugated cover allows for extra flexibility. Hose is compounded for low permeation and is reinforced with a wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. This hose is primarily used for extra flexible fuel fill (gas or diesel) and is for pleasure boats only. Temperature range is -5°F to 180°F. Meets SAE J1527 Type A2 and NMMA Type Accepted standards.

4 Blade aluminum propeller for 25-70 horsepower engines with 13 tooth spline and thru hub exhaust. 3-1/4" gear case.

4 Blade aluminum propeller for 35-65 horsepower engines with 13 tooth spline and thru hub exhaust. 3-1/4" Gear Case.

ALTUS Ventilation Hatch - OD 13-1/8" x 13-1/8" ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight. They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate. Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position. The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”. An aluminum counter flange and a mosquito screen are available for these hatches. Features: External Dimensions -  13 1/8" x 13 1/8" Cut Out Dimensions - 10 1/4" x 10 1/4"  Number of Handles - 1 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.