|
4 Port Oil Change System with Reversing Switch - 12V
Features:
Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models
TouchPad Controlled
Bronze Manifold System
System Sizes from 3 Valves to 6 Valves
Resettable Overcurrent and Dry Run Protection
Cover Conceals Pump and Circuitry on G Series
Oil Pan Adaptors Available for all Common Marine engines
|
908.00 |
|
|
3 Port Oil Change System with Reversing Switch - 12V
Features:
Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models
TouchPad Controlled
Bronze Manifold System
System Sizes from 3 Valves to 6 Valves
Resettable Overcurrent and Dry Run Protection
Cover Conceals Pump and Circuitry on G Series
Oil Pan Adaptors Available for all Common Marine engines
|
860.66 |
|
|
6 Port Oil Change System with Reversing Switch - 12V
Features:
Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models
TouchPad Controlled
Bronze Manifold System
System Sizes from 3 Valves to 6 Valves
Resettable Overcurrent and Dry Run Protection
Cover Conceals Pump and Circuitry on G Series
Oil Pan Adaptors Available for all Common Marine engines
|
924.67 |
|
|
4 Port Oil Change System with Reversing Switch - 24V
Features:
Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models
TouchPad Controlled
Bronze Manifold System
System Sizes from 3 Valves to 6 Valves
Resettable Overcurrent and Dry Run Protection
Cover Conceals Pump and Circuitry on G Series
Oil Pan Adaptors Available for all Common Marine engines
|
921.34 |
|
|
3 Port Oil Change System with Reversing Switch - 24V
Features:
Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models
TouchPad Controlled
Bronze Manifold System
System Sizes from 3 Valves to 6 Valves
Resettable Overcurrent and Dry Run Protection
Cover Conceals Pump and Circuitry on G Series
Oil Pan Adaptors Available for all Common Marine engines
|
874.00 |
|
|
6 Port Oil Change System with Reversing Switch - 24V
Features:
Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models
TouchPad Controlled
Bronze Manifold System
System Sizes from 3 Valves to 6 Valves
Resettable Overcurrent and Dry Run Protection
Cover Conceals Pump and Circuitry on G Series
Oil Pan Adaptors Available for all Common Marine engines
|
938.00 |
|
|
Oil Change Pump with Battery Clips - 12V
This portable, lightweight Premium Electric Oil Pump is easy to use and transport. The self-priming 12V pump attaches to battery terminals with alligator clips and drains oil through the dipstick tube on outboards and sterndrives. Convenient DIY operation saves money on expensive oil changes. Its compact size makes it is easy to store. Includes 48” inlet and 80” outlet hoses. 12VDC. 60W. Maximum run time: 30 minutes. NOT intended for commercial use. NOT suitable for pumping out transmission oil, water, or flammable liquids.
Features:
Oil flow rate: 0.84 quarts/min @ 140°F (0.8 liters/min @ 60°C)
Diesel flow rate: 1.9 quarts/min @ 75°F (1.8 liters/min @ 23°C)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
49.67 |
|
|
Jabsco offers 3 options of Oil Change Systems to help you get you ready for Winter.
The Porta-Quick Portable Oil Changer makes quick, clean and easy oil changes on-board any boat, because it uses the vessel's own power supply to operate the powerful oil reservoir mounted flexible impeller pump.
The Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engine oil pan or transmission sump.
The Do-it-Yourself Oil Changer will extract up to 50 weight of oil at a temperature of 160°F (71°C) through the engine's dip stick tube, usually in less than 5 minutes.
The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process, ideal for changing oil in Boats, RV's, and Lawn and Garden Equipment.
Specials Closeouts Remanufactured Rebates
|
|
|
17820 Oil Changer System
The Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engines' oil pans or transmissions' oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve. The system's cover provides an attractive appearance, fully shrouding the entire pump and manifold system. It also provides added protection against accidental draining of an engine's oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open. Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
605.62 |
|
|
Ballast Pump
Today's Wakeboard and Ski tow boats need to be able to take on water ballast to modify their wake formation. A development of our tried and tested Puppy Pumps lets these specialist craft rapidly take on and dump ballast, while modern electronics guard against dry running damage to the impeller
The choice of motor boat builders for ski and wakeboard ballast systems.
Includes Run-Dry Protection Device
9 GPM (34 LPM) flow rate
Approximately 80 pounds of water ballast per minute
Self-priming to 3'
Reversible pump both fills and empties ballast tanks
Reversing switch
Ignition protected
Ports
1" (25mm) hose barb external
1/2" NPT internal
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
354.12 |
|
|
Oil Changer System
This kit is particularly suitable for oil changes or the removal/change of other viscous liquids like antifreeze in tight spaces.
Features:
The pump is self-priming and can run dry
Can be reversed
Kit Contains:
5-gallon bucket
12V gear pump with 6 ft. wires with fuse and battery clamps
Oil dip hose set with 6mm and 8 mm quick-connect hose connections
5/8 in. port connections
6 amp fuse for continuous duty
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
181.82 |
|
|
Flat Tank Oil Changer System
The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process, ideal for changing engine oil in Boats, RV's, Lawn and Garden Equipment.
There is no need to worry about open containers causing spills when changing engine oils with the 3-1/2 Gallon (13LTR) compact self-contained unit fitted with a self-priming diaphragm pump with an easy pour spout for emptying.
The Flat Tank design allows for easy storage in deck boxes, boat storage lockers, or RV storage compartments. Easy to use, clean and efficient dipstick suction tube, battery clamp wire leads, an on-off pump switch.
Features:
Stores easily
Compact robust tank design
Easy pour spout with screw on cap
Easy to carry handle
3-1/2 gallon (13ltr) sealed container
Self-priming, run dry pump
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
191.41 |
|
|
Mate USA M164-924-15 12/24V OIL CHANGE SYSTEM
3 Valves compact oil change electronic system for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. The electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. Automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. Indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.
PART #: M164-924-15
VOLTS: 12/24
GPM: 2.6
AMPERE: 4A/2A
PORTS: 1/2" NPT
|
927.00 |
|
|
The Economy Engine Oil Changer will extract up to 50 weight of oil at a temperature of 70 deg. F (21 deg. C) through the engine's dip stick tube, usually in less than 5 minutes.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
201.02 |
|
|
Oil Change Pump w/3.5 Gallon Bucket - 12 VDC, 1.5 GPM
Incorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty.
Features:
12 VDC
8' [2.4 m] Cable w/ Battery Clips
CE
Hose kit
3.5 Gal [13L] Storage Container
Uses: Oil changing, winterizing and liquid transfer
|
220.88 |
|