|
GX Tank 140 Tank Monitoring for 4-20 MA, 1-10VDC Sensors - Monitors Up to 4 Sensors *Sensor Not Included
The GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for our range of GX system monitoring products, of which the Cerbo GX is the most commonly used model.
Tank levels can be read out locally in the system, see screenshot, as well remotely through our VRM Portal.
The GX Tank is compatible with current senders (4 to 20 mA) as well as voltage senders (0 to 10 V). The connection to the GX Device is via USB, which is also how the GX Tank is powered: no additional power wires are required.
Tank sender wiring is kept as simple as possible: two of the four inputs provide a 24 V power supply, to power the sender. The other two channels do require an external power supply, and there is power in the terminal together with fused outputs to facilitate that.
Upper and lower limits are configurable, to allow using senders that provide only part of the scale, for example, 0 to 5 V.
To provide a stable reading, the readings are averaged damping. The damping can be configured between 1 and 60 seconds.
Faulty sensors and wiring issues are detected: an alarm will be raised when values are out of range.
For marine applications, the GX Device can transmit these tank levels on the NMEA 2000 network to be picked up by other displays such as an MFD.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
118.32 |
|
|
March 0153-0011-1000 Screw 1/4-20 X 1 1/2" Hex
|
1.08 |
|
|
Major Rebuild Kit for Sherwood F-95
This kit contains the following items
GY 211P-2
1
SQ-HD-PLUG 1/8-B
MS DATA SHEET
1
DATA SHEET
SH 10183
1
COVER ASSEMBLY
SH 10515C
1
SCREW & WASHER
SH 10615K
1
IMPELLER KIT
SH 10927
1
SEAL/SEAT ASSEMBLY
SH 10929
1
CAM
SH 10931
1
VELLUMOID 505 FIBRE GASKET
SH 12710
4
LOCKWASHER
SH 1311
2
DOWELL PIN
SH 1482
4
SCREW HEX HD 1/4"-20 x 1/2"
SH 4257
1
BALL BEARING
SH 4258
3
SNAP RING (SMALL)
SH 4259
1
SNAP RING (LARGE)
SH 4432
1
KEY
This kit is put together at time of order.
|
455.05 |
|
|
Simer BP20X Bronze Paddle Pump, 3/4” NPT Ports
Simer- Bronze Paddle Pump, 3/4” NPT Ports, 1/2” 416SS Shaft, up to 15 GPM, 58 Feet of Head Maximum
|
342.63 |
|
|
1850 M2 Vessel Systems Monitor
Performs comprehensive monitoring of four critical systems in one compact organic LED digital monitor.
DC System Monitoring (up to two batteries)
One input monitors the DC voltage, state-of-charge, current for one battery bank and another input monitors the voltage of an additional battery bank. Alarms include high and low voltage, high current, and low battery.
AC System Monitoring
The VSM monitors a single AC voltage, current, and frequency. Alarms include high and low voltage, high current, and high and low frequency.
Bilge & Tank Monitoring
The VSM has two inputs that can be configured as a bilge or tank monitor. When configured as a bilge input, monitoring functions include pump active, cycle count in the last 24-hours, average cycles in a typical 24-hour period, and total cycles. High alarms can be set for both the minutes of run time in the last hour as well as the number or cycle counts in the last 24-hours. When configured as a tank input, tank status can be represented in both capacity (gallons or liters) or as a percentage of capacity. Custom tank shapes can be auto-calibrated or programmed. Both high and low level alarms can be set for all tanks.
Specifications:
Meter: Bilge, Current, Tank, Voltage
Frequency: 40-90Hz
Current Range: 0-150A AC/-500 to 500A DC
Operating Voltage: 40-300V AC/7-70V DC
Minimum Current Draw: 18.8mA @ 12V, backlight off/35mA @ 12V, backlight off
Nominal Voltage: 120V AC, 230V AC, 12V DC, 24V DC, 48V DC
|
340.22 |
|
|
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**
Click here to download form.
Cortex M1- Full Class B SOTDMA SmartAIS Transponder with Remote Vessel Monitoring - Works Worldwide
Full Class B SOTDMA with smartAIS send and receive and integrated no-loss splitter. Monitor and control onboard systems and keep alerted on board or ashore from your smartphone.
Features:
This Cortex model is made to function Worldwide
Add H1P portable handset for full VHF capability
Built-in Class B SOTDMA with no-loss antenna splitter
Built-in WiFi and Cellular connectivity on monitoring onboard and ashore
Low power consumption hub
10Hz GPS antenna
Monitor up to 5 sensors connected directly
Network to NMEA2000 to monitor sensors remotely and receive Man Overboard alarms from other devices
The Intelligent Boat
SOTDMA smartAIS transponder with remote vessel monitoring and control
Smart & Connected
Predicts collisions with other vessels and knows when someone falls overboard
Knows when your anchor is dragging and will tell you when something is wrong, whether you're onboard or ashore
Cortex is the brain of your boat
The smartAIS Advantage
smartAIS consumes very low power and continuously alerts even if your power intensive MFD or smartphone is switched off
smartAIS proactively alerts you of potential collisions, anchor drag and man overboard situations
Collision Prevention
smartAIS combines GPS, AIS and heading data with smart logic to proactively warns you of collision risks
Clearly see the highest risk vessels
When using a Cortex handset, smartphone, or tablet, make trial maneuvers to see a simulation of where and when your paths will cross
Anchor Watch
Sleep soundly or explore with abandon knowing that your boat is exactly where you anchored
By combining your position and heading, Cortex will determine if your anchor drags
When your boat moves outside your anchor swing radius the alarm will sound on Cortex handsets and your smartphone
Receive alerts while ashore via the Cortex Monitor App on your smartphone
Cortex will keep watch and alert you about changes in water depth, wind speed, or direction while you are anchored
Man Overboard (MOB)
When Cortex detects an AIS MOB activation it immediately sounds the alarm
Compatible with all AIS MOBs, you will see where the MOB was first activated along with continuous updates to its location, bearing, and range
Get clear information and take the best course
Label AIS MOB devices with crew names for easy identification
Pressing the dedicated MOB button activates a trackback mode on all handsets and marks the MOB on NMEA 2000 connected MFDs
Label AIS MOB devices with crew names for easy identification.
Pressing the dedicated MOB button activates a trackback mode on all handsets and marks the MOB on NMEA 2000 connected MFDs
Advanced SOTDMA Technology
SOTDMA is the latest AIS technology with 5W power output, making your boat visible over a longer distance
With faster and more frequent transmissions of your position to other vessels, you'll be safer, especially at speeds of over 14 knots
Connect via WiFi
Receive alerts on your smartphone, tablet, or smartwatch anywhere onboard
Connect up to 10 WiFi devices to receive and manage alarms, view AIS information and instrument data
Integrate Cortex to your NMEA 2000 network and use your mobile devices to view information your instruments provide
10Hz GPS Update Rate
With 10Hz GPS updates, your vessel position is more accurately plotted
When you connect other devices to your Cortex GPS using NMEA 2000 or NMEA 0183, all onboard equipment benefits from the superfast GPS
Integrated No-Loss Splitter
The integrated no-loss splitter allows you to share a single antenna with another VHF and delivers optimum performance for both your VHF and AIS
Low Power Consumption
With low input power, you can keep the Cortex always on, so you are always visible and always watching
Receive alerts without the need for power-hungry MFDs
Cortex Will Get Smarter.
New features and capabilities are downloaded automatically to the Cortex Onboard app for easy updates to Cortex via WiFi whenever convenient
Remote vessel monitoring and control
See your boat's status, receive alerts, and control devices
Easy setup, no fee
With built-in sensors, you can see twice-daily updates of your boat's location, battery level, true heading, ambient temperature, and barometric pressure
Connect to your NMEA network and monitor more - wind speed direction and water depth
As long as your smartphone and boat have cellular access, you can know your boat is safe and secure
No subscription, no hassle
Real-time monitoring and control
Subscribe to a Cortex Monitor Plan to receive alerts, see real-time information about your boat, and remotely control devices like lighting, air conditioning, refrigeration, or ice-makers
Whether you've left your boat, at anchor, or at the marina, know exactly where it is and what's happening onboard
The world's most advanced VHF radio
Upgrade to the future of VHF
The Cortex is VHF-ready, simply add wireless H1P handsets to enjoy the power of VHF and AIS combined
|
1619.99 |
|
|
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. **
Click here to download form.
Cortex M1- Full Class B SOTDMA SmartAIS Transponder with Remote Vessel Monitoring - Only Works in North America
Full Class B SOTDMA with smartAIS send and receive and integrated no-loss splitter. Monitor and control onboard systems and keep alerted on board or ashore from your smartphone.
Features:
This Cortex model is made to function ONLY in North America
Add H1P portable handset for full VHF capability
Built-in Class B SOTDMA with no-loss antenna splitter
Built-in WiFi and Cellular connectivity on monitoring onboard and ashore
Low power consumption hub
10Hz GPS antenna
Monitor up to 5 sensors connected directly
Network to NMEA2000 to monitor sensors remotely and receive Man Overboard alarms from other devices
The Intelligent Boat
SOTDMA smartAIS transponder with remote vessel monitoring and control
Smart & Connected
Predicts collisions with other vessels and knows when someone falls overboard
Knows when your anchor is dragging and will tell you when something is wrong, whether you're onboard or ashore
Cortex is the brain of your boat
The smartAIS Advantage
smartAIS consumes very low power and continuously alerts even if your power intensive MFD or smartphone is switched off
smartAIS proactively alerts you of potential collisions, anchor drag and man overboard situations
Collision Prevention
smartAIS combines GPS, AIS and heading data with smart logic to proactively warns you of collision risks
Clearly see the highest risk vessels
When using a Cortex handset, smartphone, or tablet, make trial maneuvers to see a simulation of where and when your paths will cross
Anchor Watch
Sleep soundly or explore with abandon knowing that your boat is exactly where you anchored
By combining your position and heading, Cortex will determine if your anchor drags
When your boat moves outside your anchor swing radius the alarm will sound on Cortex handsets and your smartphone
Receive alerts while ashore via the Cortex Monitor App on your smartphone
Cortex will keep watch and alert you about changes in water depth, wind speed, or direction while you are anchored
Man Overboard (MOB)
When Cortex detects an AIS MOB activation it immediately sounds the alarm
Compatible with all AIS MOBs, you will see where the MOB was first activated along with continuous updates to its location, bearing, and range
Get clear information and take the best course
Label AIS MOB devices with crew names for easy identification
Pressing the dedicated MOB button activates a trackback mode on all handsets and marks the MOB on NMEA 2000 connected MFDs
Advanced SOTDMA Technology
SOTDMA is the latest AIS technology with 5W power output, making your boat visible over a longer distance
With faster and more frequent transmissions of your position to other vessels, you'll be safer, especially at speeds of over 14 knots
Connect via WiFi
Receive alerts on your smartphone, tablet, or smartwatch anywhere onboard
Connect up to 10 WiFi devices to receive and manage alarms, view AIS information and instrument data
Integrate Cortex to your NMEA 2000 network and use your mobile devices to view information your instruments provide
10Hz GPS Update Rate
With 10Hz GPS updates, your vessel position is more accurately plotted
When you connect other devices to your Cortex GPS using NMEA 2000 or NMEA 0183, all onboard equipment benefits from the superfast GPS
Integrated No-Loss Splitter
The integrated no-loss splitter allows you to share a single antenna with another VHF and delivers optimum performance for both your VHF and AIS
Low Power Consumption
With low input power, you can keep the Cortex always on, so you are always visible and always watching
Receive alerts without the need for power-hungry MFDs
Cortex Will Get Smarter.
New features and capabilities are downloaded automatically to the Cortex Onboard app for easy updates to Cortex via WiFi whenever convenient
Remote vessel monitoring and control
See your boat's status, receive alerts, and control devices
Easy setup, no fee
With built-in sensors, you can see twice-daily updates of your boat's location, battery level, true heading, ambient temperature, and barometric pressure
Connect to your NMEA network and monitor more - wind speed direction and water depth
As long as your smartphone and boat have cellular access, you can know your boat is safe and secure
No subscription, no hassle
Real-time monitoring and control
Subscribe to a Cortex Monitor Plan to receive alerts, see real-time information about your boat, and remotely control devices like lighting, air conditioning, refrigeration, or ice-makers
Whether you've left your boat, at anchor, or at the marina, know exactly where it is and what's happening onboard
The world's most advanced VHF radio
Upgrade to the future of VHF
The Cortex is VHF-ready, simply add wireless H1P handsets to enjoy the power of VHF and AIS combined
|
1019.99 |
|
|
Purchase an HDS LIVE or all-new HDS PRO and get up to $800 maximum savings on qualifying fishing system components including ActiveTarget Live sonar ($200), Ghost Trolling Motor ($500), MotorGuide Xi5 ($200) or Tour Pro ($200) Trolling Motors, HALO Radar ($400) and NAC-2 or NAC-3 autopilots ($300).
Offer valid now until April 30th, 2023
HDS PRO
With built-in support for the new, ultra-high-definition Active Imaging™ HD and ActiveTarget® 2 you’ll see more clearly and find more fish than ever before.
HDS LIVE
Premium performance and support for the best collection of innovative sonar and navigation features available.
Ultimate Fishing System Components
Seamlessly combine core fishing products on your boat to create one Ultimate Fishing System.
Offer valid now until April 30th, 2023
Specials Closeouts Remanufactured Rebates
|
|
|
Marine Plumbing & Ventilation
The plumbing and ventilation systems are two of the most important aspects of your boat. It is very important that any toilet facilities work properly, and you also need to ensure that there is adequate ventilation for the engine and to remove any fumes that can build up in passenger compartments or similar areas. With our marine plumbing and ventilation parts and accessories, you have what you need all in one place, right at your fingertips. From air conditioning & refrigeration supplies to bilge pumps, fans, and hot water heaters, we have it all under one roof.
We carry several brands and can offer Livewell pumps and transfer pumps, along with several marine sanitation options. Portable toilets are an excellent choice for boats that are large enough to accommodate them, but the comfort of your passengers is not the only thing to be aware of. You also need to make sure you have adequate engine cooling pumps, and that any washdown / pressure pumps work correctly. With a WaterMaker pump, quality fittings, and the right blowers & heaters for your boat, you can ensure that your boat will operate correctly and your passengers will have the comfort and convenience they need.
|
|
|
Receive up to $300 back when you purchase a qualifying GO XSE or XSR. Cruise with confidence and fish like a pro. Behind every sunlight-viewable touchscreen lies a built-in GPS receiver, echosounder, wireless connectivity, and industry-standard NMEA 2000® networking.
Offer valid now until April 30th, 2021
Choose Your GO Display or Bundle
Don't miss out now until April 30th, 2021, on the Simrad GO Promotion. Receive up to $300 back when you buy a qualifying Simrad GO XSE and XSR Chartplotters.
Simrad GO series displays are designed to help you make the most of your time on the water and are a perfect addition to sportboats, dayboats, and center-consoles. Behind every sunlight-viewable GO series touchscreen lies a built-in GPS receiver, echosounder, wireless connectivity, and industry standard NMEA 2000® networking. Navigate, connect with mobile devices, control accessories like your on-board sound system, and choose from an array of built-in sonar. Radar capability—available on the GO7 and above—offers added safety and fishfinding functionality.
Specials Closeouts Remanufactured Rebates
|
|
|
Receive up to $200 back when you purchase select B&G Vulcan Chartplotters. Purchase a qualifying model now until April 30th, 2021. Don't miss out on these super savings! Offer valid now until April 30th, 2021
B&G's Vulcan range of sailing chartplotters take the guesswork out of sailing. Whether you’re an experienced sailor or just starting out, Vulcan is packed with features that will help you get the most from your time on the water.
*Offer valid now until April 30th, 2021
Specials Closeouts Remanufactured Rebates
|
|
|
Furuno BBWX4 - Save Up To $200 in Rebates!
Purchase a new Furuno BBWX4 SiriusXM Satellite Weather & Radio Receiver now until March 31st, 2021, to qualify for a $100 rebate from Furuno. On top of that, SiriusXM is offering an additional $100 VISA Gift Card for activating your device with a qualifying plan*. That’s up to $200 in rebates!
For serious anglers looking for that competitive edge, the BBWX4 will soon offer extremely detailed “Fish Mapping” functionality on select NavNet TZtouch displays, providing you with a big advantage you’ll love having on tournament day!
Specials Closeouts Remanufactured Rebates
|
|
|
Boat Monitor with Bilge Sentry
The Boat Monitor is the system's brain - where data from the boat is continually collected and sent to the app.
The system runs on an internal battery with 40 days of power and charges itself every time a boat's batteries are being charged. In other words, it is completely maintenance-free and will monitor the boat for years without removing it to charge.
Features:
The boat monitor can monitor up to 2 batteries and bilge pump activity
The Bilge Sentry can measure the water level in the boat and send alerts when water levels are too high
Sensor for water and air temperature
Provides position of boat utilizing all available satellites
Geofence which alerts boaters if the boat leaves a specific area (fully automatic function)
Visualize the current trip and see the history of previous voyages
The unit has an integrated accelerometer that displays G-force (measurement area: 0g to 8g)
The Best Defense Against Water Damage
With the Bilge Sentry, users always see what's happening in the bilge.
Bilge Sentry gives users an exact measurement of the water level between 0 and 6 inches. The app shows the current water level and data on when the boat began taking in water and how quickly it is filling up.
In addition, it measures the temperature in the bilge so that boaters can ensure that the boat isn't exposed to harmful frost and icing.
Cables Made for Maritime Use
The cable set connects directly to up to two battery banks and the bilge pump.
Sensar's cables were developed specifically to be able to function in harsh maritime conditions. They will always deliver data back to the boat monitor, regardless of the moisture in the motor room.
Keep Track of the Boat at All Times
Automatic GPS features give users peace of mind.
The boat monitor has sensors that track position and movement, which allows the app to show users the current position of the boat at all times.
GeoFence and Triplog features will automatically be updated so that boaters always know when the boat is underway, where the boat is, and where it has been.
Simple Installation
No screws, no metal components, no problem.
Sensar designed the installation process so boaters can easily do it themselves with the help of a pair of pliers.
With the device, users will receive enough industrial tape to mount the entire system in cases where they don't want to use screws in the boat.
Additionally, Sensar has chosen plastic components across the system to avoid eventual sources of rust in the boat.
In the Box:
Boat monitor
Battery/bilge pump cable (6 ft.)
Bilge Sentry (cable 5 ft.)
Mounting bracket
Information card (ID and connection code)
Quick connection
T-splice cable
Double-sided tape (4 pcs.)
Cleaning wipes (2 pcs.)
Specifications:
Size (H x W x D): 112.5 x 97 x 35.5 mm
Weight: 276.5 grams
Internal Battery: 40 days of power (charges automatically when boat batteries charge)
Mobile Coverage: 4G Internal Antenna
Boat Batteries: Connections for two battery banks, support 12V and 24V batteries, warning voltage: 12.2V, and alarm voltage: 11.8V
Bilge Pump: Notifies every time the bilge pump is running
Bilge Water Level: Measures between 0 and 6 inches, warning water level: 4 in., and alarm water level: 5.5 in.
Bilge Temperature: Measures between -4°F and 140°C, warning temperature: 34°F, and alarm temperature: 28°F
GPS: Internal antenna
Position Tech: Multi-GNSS-receiver
Mounting Bracket: Height: 83 mm, width: 90 mm, and depth: 28 mm
Attachment for Bracket and Bilge Sentry: 3M Industrial Tape and 28 mm screws
|
598.80 |
|
|
M2 OLED Temperature Monitor
The M2 Organic LED Digital Monitor measures essential electrical system parameters with adjustable alarms and an auto-dimming display. The M2 Monitors include a MOSFET External Circuit Relay (ECR) which can be used to control external circuits based on any value measured by the M2.
Features:
Auto-dimming, bright Organic LED display is easy to read
80dB alarm on all models
Isolated 500mA MOSFET relay
Includes external DC Shunt or AC Current Transformer when required
Versatile external temperature monitoring
Monitor up to 4 temperature sensors
Temperatures range from -40°C to 120°C (-40°F to 250°F)
Measures in Fahrenheit or Celsius
ABYC compliant for engine exhaust
Waterproof temperature sensors included
Specifications:
Meter: Temperature
Function: Monitors Temperature
Display Size: 55mm x 28mm
Input Voltage: 7-70V DC
Range: 0.3W-1.0W
Sensor Locations: up to 4
Temperature Range: -40°C - 120°C (-40°F - 250°F)
Temp Sensor: 4 x PN 1821
Weight: 0.25lb (0.11 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
330.13 |
|
|
Paragon Junior 12v Water Pressure System - 2 Gal Tank - 7 GPM
Water Pressure System for Yachts under 50'.
Features:
Max 7 GPM.
Operating pressure range 20-40 PSI.
Intended for yachts 50ft and smaller.
Complies with NSF-61 low-lead standard.
Compact and powerful 2-stage rotary pump.
Pressure gauge and 3/4" strainer included.
Patented NOFLO;Dry-run protection.
NOTE : Pressure storage tank is required for water pressure system application.
Specifications:
Yacht Size: Up to 50'
Pressure Range: 20-40 psi
Max GPM: 7
Pressure Storage Tank Included: 2-Gallon
Self Priming: Yes
Breaker DC: 30 amp
|
2602.20 |
|