|
Commercial Duty Vane Pump - 12V
GROCO Vane Pumps are self-priming. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. Ignition protected motor and #316 stainless steel shaft. SPO-80 Series Vane Pumps have a more powerful motor and are better suited for long run-time or head pressure greater than 20 PSI.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: None
Max GPM: 7
Breaker DC: 30 Amp
|
885.34 |
|
|
Commercial Duty Vane Pump - 12V
GROCO Vane Pumps are self-priming. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. Ignition protected motor and #316 stainless steel shaft. SPO-80 Series Vane Pumps have a more powerful motor and are better suited for long run-time or head pressure greater than 20 PSI.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: None
Max GPM: 7
Breaker DC: 15 Amp
|
892.00 |
|
|
Groco C-60 12V Deck Wash Pump, 12Volt
Groco- Deck Wash Vane Pump System 6.5GPM 20-40psi 12VDC
More Info: C60
|
724.50 |
|
|
Commercial Duty Reversing Vane Pump - 12V
GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. Ignition protected motor, #316 stainless steel shaft, and reversing (R). SPO-80 Series Vane Pumps have a more powerful motor and are better suited for long run-time or head pressure greater than 20 PSI.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: Pump Mounted Reversing Switch
Max GPM: 7
Breaker DC: 30 Amp
|
1140.00 |
|
|
Commercial Duty Reversing Vane Pump - 24V
GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. Ignition protected motor, #316 stainless steel shaft, and reversing (R). SPO-80 Series Vane Pumps have a more powerful motor and are better suited for long run-time or head pressure greater than 20 PSI.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: Pump Mounted Reversing Switch
Max GPM: 7
Breaker DC: 15 Amp
|
1146.67 |
|
|
Heavy Duty Positive Displacement Vane Pump - 12V
GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: None
Max GPM: 6.5
Breaker DC: 30 Amp
|
408.67 |
|
|
Heavy Duty Positive Displacement Vane Pump - 24V
GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: None
Max GPM: 6.5
Breaker DC: 15 Amp
|
415.33 |
|
|
Commercial Duty Water Puppy
Flow rate: 34 litres/min (9 USgallons/min)
Self-priming from dry up to 1.2m (4ft)
Features:
Small bilge debris present no problem to these bronze bodied, flexible impeller pumps.
Simple design means fewer wearing parts.
ISO 8846 MARINE (Ignition protection).
ISO 8849 MARINE (Bilge pump standard).
Motor
Permanent magnet type, fully enclosed, stainless steel shaft, ball type shaft bearing, has adequate torque to reverse the pump
Port Type
1/2" Internal Pipe Threads
1" External Hose Barb
Adapter for 3/4 " External Garden Hose Thread included
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
351.42 |
|
|
Groco 12V-J Motor & End Cap for the Paragon Senior Series
|
2957.11 |
|
|
March 809 BRC HS 12VDC Mag-Drive Pump
March Mag-Drive Centrifugal Pumps Bronze 12VDC High Speed 5.5GPM
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 12VDC High Speed 5.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet
|
499.69 |
|
|
Groco Bp-5009 12V Submersible Hd Bilge Pump
|
409.50 |
|
|
Groco Cp-5009 12V Hd Sub Circulating Pump
|
408.72 |
|
|
HotShot HD4 Heavy Duty Washdown Pump - 12V - 4 GPM - 60 PSI
Years of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits.
HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.
Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion.
Features:
Co-molded diaphragm technology for long life and durability
HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures
Efficient and quiet operation
Integrated, sealed pressure switch for on-demand operation
Self-priming allows for installation versatility
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Full kit versions available which include 25' (7.6m) hose coil
Specifications:
Motor design: Brushed, permanent magnet TENV
Pumphead upper housing material: Glass fiber reinforced polypropylene
Diaphragm: Co-molded TPV
Check valves: EPDM
Max inlet pressure: 30 PSI (2.1 Bar)
Fluid temperature range: 32°F – 140°F (0°C – 60°C)
Dry self-priming capability: 7ft min (2.1m min)
Certifications: CE, ISO8846, RCM
Ingress protection: IPX6
Fittings & Accessories:
Quick Connect straight hosebarb and GHT fittings. Size varies by model.
90° 20 mesh Quick Connect straine
Trigger nozzle & Quick Connect hose adapters
Kit version includes 25' HoseCoil
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
166.06 |
|
|
HotShot HD5 Heavy Duty Washdown Pump - 12V - 5 GPM - 70 PSI
Years of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits.
HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.
Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion.
Features:
Co-molded diaphragm technology for long life and durability
HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures
Efficient and quiet operation
Integrated, sealed pressure switch for on-demand operation
Self-priming allows for installation versatility
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Full kit versions available which include 25' (7.6m) hose coil
Specifications:
Motor design: Brushed, permanent magnet TENV
Pumphead upper housing material: Glass fiber reinforced polypropylene
Diaphragm: Co-molded TPV
Check valves: EPDM
Max inlet pressure: 30 PSI (2.1 Bar)
Fluid temperature range: 32°F – 140°F (0°C – 60°C)
Dry self-priming capability: 7ft min (2.1m min)
Certifications: CE, ISO8846, RCM
Ingress protection: IPX6
Fittings & Accessories:
Quick Connect straight hosebarb and GHT fittings. Size varies by model.
90° 20 mesh Quick Connect strainer
Trigger nozzle & Quick Connect hose adapters
No kit versions with hose offered
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
209.76 |
|
|
HotShot HD6 Heavy Duty Washdown Pump - 12V - 6 GPM - 70 PSI
Years of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits.
HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.
Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion.
Features:
Co-molded diaphragm technology for long life and durability
HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures
Efficient and quiet operation
Integrated, sealed pressure switch for on-demand operation
Self-priming allows for installation versatility
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Full kit versions available which include 25' (7.6m) hose coil
Specifications:
Motor design: Brushed, permanent magnet TENV
Pumphead upper housing material: Glass fiber reinforced polypropylene
Diaphragm: Co-molded TPV
Check valves: EPDM
Max inlet pressure: 30 PSI (2.1 Bar)
Fluid temperature range: 32°F – 140°F (0°C – 60°C)
Dry self-priming capability: 7ft min (2.1m min)
Certifications: CE, ISO8846, RCM
Ingress protection: IPX6
Fittings & Accessories:
Quick Connect straight hosebarb and GHT fittings. Size varies by model.
90° 20 mesh Quick Connect strainer
Trigger nozzle & Quick Connect hose adapters
Kit version includes 25' deluxe HoseCoil
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
231.61 |
|