Impeller Kit F3 Nitrile A worn or damaged impeller can cause system failure or engine breakdown. SPX's Johnson Pump brand impellers are developed and manufactured for maximum flow and long life. With a genuine spare impeller you can also be sure that you are getting the quality required by engine manufacturers and professionals. Features:  Made for F3B Pump Material: Nitrile (oil resistant) In The Product Box: Impeller Glycerine lubricate O-rings, gasket, and cover Dimensions: Outer Diameter: 1.78" Inner Diameter: 0.31"/Flat Width: 0.50" *F3B oil pump with reversible switch sold separately 

Impeller Kit - F75 with Thread Features: New Impeller only Replaces: Johnson 09-821BT-1 , 09-821B , 09-821BT Sierra 18-45714 Fits F75 Series Pumps , F75B-9 One end is threaded for use with a puller

Impeller Kit 9-45700R Take good care of the cooling system - change to a new impeller every year!

Viking Universal Manual Bilge Pump - 38mm Heavy duty, self-priming, hand-powered bilge pump for nearly any type of installation Viking Universal's mounting bracket allows for vertical or horizontal surface mounting. With the optional Through Deck kit the pump can be installed behind bulkheads or below the deck. To minimize required space the Viking Universal excels at adaption. The simple switching of the valves together with the connections allows you to choose flow direction. The included KlickTite™ straight and 90° hose connections can be used in combination. The hose connections and even the pump housing can be easily rotated for optimal positioning. While designed as a powerful bilge pump, the Viking Universal's large 38mm (1-1/2") valves enable the pump to also be used for pumping toilet waste. Fasteners are included for stowing the handle and the safety clasp ensures that the handle cannot be lost while not in use or during an emergency situation. Viking Universal meets ISO 15083, "Bilge pumping systems". Specifications: Body and cover:Polypropylene plastic reinforced with 30% fiberglass Diaphragm and valves:Nitrile rubber Wetted parts:PP30GF, PA66 GF30, POM, stainless steel, nitrile rubber Maximum suction:3M (10') Maximum head:4M (13') Combined suction/head:7M (23') Connection:KlickTite? connectors 38mm (1-1/2") hose. Both straight and 90° bends are included Max. liquid temp:+60°C (140°F) Weight:1,5 kg (3.3 lbs)

500 GPH Ultima Combo Automatic Submersible Bilge Pump 12V Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump. CE-Approved Features: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 3/4" Includes Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 33 l/min - 525 GPH Capacity straight (13.6V/27.2V): 40 l/min - 630 GPH Amperage: 2.5 A Fuse size: 5 A Connection: 3/4" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 14.4 oz.

1250 GPH Ultima Combo Automatic Submersible Bilge Pump 12V Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump. CE-Approved Features: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 1-1/8" Does not include Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 60 l/min - 952 GPH Capacity straight (13.6V/27.2V): 73 l/min - 1150 GPH Amperage: 3 A Fuse size: 5 A Connection: 1-1/8"" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 16 oz.

Talulah High Flow Ballast Pump - 30 GPM - 12V With an extraordinary 30GPM rating, the Johnson Pump Talulah HighFlow Ballast Pump represents the industry gold standard of high speed, reliable and efficient reversible ballast pumps. Built with ball bearings, a solid bronze pump head, and built-in thermal protection, this ballast pump is exceptionally durable and built to last. The compact size allows for flexibility in system design without using valuable storage space and without sacrificing the versatile high volume connections unique to the design of the pump head. The Talulah HF also offers run dry protection, the integrated Run-Dry Protection circuit monitors the current draw of the pump and automatically shuts it off if conditions indicate water is no longer flowing through the pump. This innovative feature can help minimize any damage to the new neoprene orange impeller, which itself delivers faster fill/drain times and is more reliable than the previous models. In addition, the ignition protected design makes this pump suitable for installation in the bilge compartment of the boat without risk of fire or explosion due to fuel vapors. Whether for use in a new automated ballast system installation or to upgrade the pumps in an existing system for faster fill and drain times, the Talulah HF 30GPM Ballast Pump delivers the next generation of pump performance in the wakeboarding world. Features: Built in Thermal Overheat Protection: Automatic reset after cooling down Monitor Filling: Tanks must have overfill protection Retrofit Possible: Important to have full bore hoses – without restriction Dry Run Impeller* Intermittent Duty Important to have good electric installation and proper wire size (Acc. to ISO 10133) Recommend fresh batteries and engine running (alternator running) to ensure power supply *Dry Run

Viking Power 16 - 12V A modern, single-chamber, self-priming diaphragm pump that can be set up in several different pump/motor configurations. It is easy to install anywhere after the drain outlet in the wastewater system or as a bilge pump in any leisure craft - new or used. Its non-choke valves mean that no in-line filters are necessary. The pump can be run dry, and it can also handle a mixture of air and water without difficulty. The Viking Power 16 is self-priming up to a height of 3 meters. With its low pulse and muffled rubber bracket, this pump offers quiet operation. Specifically designed to pump waste water, the Viking Power 16 has been built to last, and engineered for easy maintenance. When it comes time to replace the premium grade reinforced nitrile rubber diaphragm, you can put in a spare without even removing the pump from the system. Delivered with 1" hose and 3/4" hose 1/2" BSP KlickTite™ XL connectors. 90° KlickTite™ XL connectors available as extra accessory. Capacity, Open Flow:16 l/min - 4.2 GPM Capacity at 0.1 bar: 15 l/min - 4.0 GPM Max Lift:3M - 9.8' Max Head:3M - 9.8' Connection: KlickTite™ XL connectors for 1" hose or 3/4" hose and 1/2" BSP threads; straight and 90°(optional)

Viking Power 16 - 24V A modern, single-chamber, self-priming diaphragm pump that can be set up in several different pump/motor configurations. It is easy to install anywhere after the drain outlet in the wastewater system or as a bilge pump in any leisure craft - new or used. Its non-choke valves mean that no in-line filters are necessary. The pump can be run dry, and it can also handle a mixture of air and water without difficulty. The Viking Power 16 is self-priming up to a height of 3 meters. With its low pulse and muffled rubber bracket, this pump offers quiet operation. Specifically designed to pump waste water, the Viking Power 16 has been built to last, and engineered for easy maintenance. When it comes time to replace the premium grade reinforced nitrile rubber diaphragm, you can put in a spare without even removing the pump from the system. Delivered with 1" hose and 3/4" hose 1/2" BSP KlickTite™ XL connectors. 90° KlickTite™ XL connectors available as extra accessory. Capacity, Open Flow:16 l/min - 4.2 GPM Capacity at 0.1 bar: 15 l/min - 4.0 GPM Max Lift:3M - 9.8' Max Head:3M - 9.8' Connection: KlickTite™ XL connectors for 1" hose or 3/4" hose and 1/2" BSP threads; straight and 90°(optional)

JMP Marine JPR-VP0020D Volvo Penta Replacement Seawater Pump Replaces Volvo Penta 3583089, Johnson 10-13283, Ancor ST347, AN5893 Note: Pump Without Gear   Product Information & Specs: Uses JMP Impeller p/n: 7100-01K Pump Weight (approx): 4.25 LBS (1.93 KG) Replaces Genuine Volvo Penta Pump: 3583089 Replaces Johnson Pump: 10-13283 Replaces Ancor Pump: ST347, AN5893 Engine Model(s): D2 SERIES D2-55A/B/C/D/E/F, D2-75A/B/C/F   Parts Internally Compatible to Genuine: YES   Product Features: Plug & Play Replacement Heavy Duty Marine Grade Casting Marine Grade Shaft (3X Series Non-Magnetic) Lip Seal High Performance Flexible Impeller

 Talulah High Flow Ballast Pump Impeller Kit For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.  A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.

Compact toilet handling and waste water pump Viking Power Vacuum The Viking Power Vacuum diaphragm pumps have been designed to meet the rigorous demands of the world's leading manufacturers of boats, recreational vehicles and busses. The Viking Power Vacuum has double check-valves and can therefore also be used in vacuum toilet systems. Naturally, pumping ordinary shower or sink drain water or bilge water is no problem for either pump. Like the Viking Power 16, this new pump has been engineered with a ball-bearing supported transmission for long service life. The pump can not only be run dry, it can also handle a mixture of air and water without difficulty. The Viking Power 32/Vacuum provides maximum flow of 32 liters per minute and is self-priming up to a height 3.5 (Vacuum) meters. Although powered by an electric motor, this pump can also be cranked by hand in an emergency. The pump has been designed to prevent the leakage of unpleasant odors; and the Viking Power 32/Vacuum can be installed in a variety of different positions. The Viking Power 32/Vacuum is built to last, yet priced competitively. Features Maximum flow 32 l/min Specifically engineered to pump black wastewater Uncompromising odor-prevention features Whisper quiet operation Self-priming High-impact glass-fiber reinforced nylon body Ball-bearing supported transmission Non-choke valves - no waste shredding required Pump head rotatable 360° Double check valves on Viking Power Vacuum Self-priming up to 2.5 meters (8.2 feet) Can be run dry and can pump air/water mixture Robust single diaphragm Electric motor with power-out, manual-crank backup Complies with ISO 15083 and small craft bilge pump Standard for vessels above 12 m (39.4 ft)

Impeller Replacement Material:MC97 Outer Diameter: 2.63" Width: 2.01" A worn or damaged impeller can cause system failure or engine breakdown. SPX's Johnson Pump brand impellers are developed and manufactured for maximum flow and long life. With a genuine spare impeller you can also be sure that you are getting the quality required by engine manufacturers and professionals.

Service Kit F6B-9 Impeller is the same as size as 09-812B 12 Blade , width: 1.9" (49.2mm) Diameter: 2-1/4" (57.1mm)

Service Kit F4B-8 -9 Johnson Pump Service Kit specifically for F4B-8 and F4B-9.