|
POP Display Box with 12-Pack Vault Drain Plugs (SV101V)
The Vault series drain plug is engineered to screw right into the existing 1/2 NPT brass or stainless transom garboard.
Features:
Triangular ergonomic cap so there are no tools required to tighten or loosen the plug
NPT backup O-ring for a water-tight fit
The matching garboard utilizes a gasket in place of messy silicone
Approved for all marine environments including saltwater
Fits all 1/2 NPT brass and stainless transom garboards
*Sold as a 12-pack (SV101V)
|
126.72 |
|
|
Vault Drain Plug
The Seaview Vault Series drain plug is engineered to screw right into the existing 1/2 NPT brass or stainless transom garboard.
Features:
Triangular ergonomic cap - no tools required
Fits all 1/2 NPT brass and stainless transom garboards
NPT thread and a backup O-ring - watertight fit
Floats if accidentally dropped in the water
Manufactured from durable marine-grade ABS
Direct replacement for black or white plastic, bronze, chrome, or brass traditional drain plugs. 114-02030410, 02030710, 50-18741, 18721
The matching garboard utilizes a gasket in place of messy silicone sealants
|
10.56 |
|
|
Polished Stainless Steel Vault Drain Plug
The VAULT series drain plug is engineered to screw right into the existing 1/2 NPT brass or stainless transom garboard.
Features:
High-polished 316 Stainless Steel
Triangular ergonomic cap so there are no tools required to tighten or loosen the plug
NPT backup O-ring for a water-tight fit
The matching garboard utilizes a gasket in place of messy silicone
Approved for all marine environments including saltwater
Fits all 1/2 NPT brass and stainless transom garboards
*Sold as an Individual
|
33.60 |
|
|
Oberdorfer N991-32-C82-W Brz Gear Pump W/12/24V Mtr
|
1896.34 |
|
|
Vault Pro - Drain Plug & Garboard Assembly
The Vault Series drain plug with gasket and garboard.
Features:
Triangular ergonomic cap - no tools required
NPT thread and a backup O-ring - water tight fit
Floats if accidentally dropped in the water
Manufactured from durable marine-grade ABS
Direct replacement for black or white plastic, bronze, chrome, or brass traditional drain plugs. 114-02030410, 02030710, 50-18741, 18721
The matching garboard utilizes a gasket in place of messy silicone sealants
|
21.12 |
|
|
Vault Center Drain Plug
The revolutionary Vault center drain plug is specifically designed to replace the shorter and far more expensive T-handle center drain plug.
Features:
Triangular ergonomic cap - no tools required
8” total length for better reach
Fits all 1/2 NPT brass and stainless transom garboards
NPT thread and a backup O-ring for a watertight fit
Floats if accidentally dropped in the water
Manufactured from durable marine-grade ABS + 15% fiber
|
19.20 |
|
|
Vault Pro - Center Drain Plug & Garboard Assembly
The revolutionary Vault center drain plug is specifically designed to replace the shorter & far more expensive T-handle center drain plug.
Features:
Triangular ergonomic cap - no tools required
8” total length for better reach
Fits all 1/2 NPT brass and stainless transom garboards
NPT thread and a backup O-ring for a watertight fit
Floats if accidentally dropped in the water
Manufactured from durable marine-grade ABS + 15% fiber
The matching garboard utilizes a gasket in place of messy silicone sealants
|
28.80 |
|
|
Polished Stainless Steel Vault Pro - Drain Plug & Garboard Assembly
The stainless steel VAULT series drain plug with gasket and S.S. garboard.
Features:
Triangular ergonomic cap so there are no tools required to tighten or loosen the plug
NPT backup O-ring for a water-tight fit
Approved for all marine environments including saltwater
Fits all 1/2 NPT brass and stainless transom garboards
*Sold as an Individual
|
51.84 |
|
|
Polished Stainless Steel Vault Pro - Center Drain Plug & Garboard Assembly
The revolutionary stainless steel Vault center drain plug with a gasket and stainless steel garboard. Specifically designed to replace the shorter and far more expensive T-handle center drain plug.
Features:
Triangular ergonomic cap - no tools required
8” total length for better reach
NPT thread and a backup O-ring for a water-tight fit
The matching garboard utilizes a gasket in place of messy silicone sealants
*Sold as an Individual
|
78.72 |
|
|
Polished Stainless Steel Vault Center Drain Plug
The revolutionary Vault center drain plug is specifically designed to replace the shorter and far more expensive T-handle center drain plug.
Features:
High-polished 316 Stainless Steel
Triangular ergonomic cap so there are no tools required to tighten or loosen the plug
8” total length for better reach
Fits all 1/2 NPT brass and stainless transom garboards
NPT thread and a backup O-ring for a water-tight fit
*Sold as an Individual
|
60.48 |
|
|
Marine Plumbing & Ventilation
The plumbing and ventilation systems are two of the most important aspects of your boat. It is very important that any toilet facilities work properly, and you also need to ensure that there is adequate ventilation for the engine and to remove any fumes that can build up in passenger compartments or similar areas. With our marine plumbing and ventilation parts and accessories, you have what you need all in one place, right at your fingertips. From air conditioning & refrigeration supplies to bilge pumps, fans, and hot water heaters, we have it all under one roof.
We carry several brands and can offer Livewell pumps and transfer pumps, along with several marine sanitation options. Portable toilets are an excellent choice for boats that are large enough to accommodate them, but the comfort of your passengers is not the only thing to be aware of. You also need to make sure you have adequate engine cooling pumps, and that any washdown / pressure pumps work correctly. With a WaterMaker pump, quality fittings, and the right blowers & heaters for your boat, you can ensure that your boat will operate correctly and your passengers will have the comfort and convenience they need.
|
|
|
Inteliplug ProX Captive Drain Plug, Garboard Assembly, Sensor & Deutsch Plug Pigtail
The Seaview Inteliplug ProX is a transom drain plug reimagined and engineered to be easy to use and impossible to lose.
Features:
ProX comes with a hermetically sealed aeronautical grade sensor with Deutsch plug pigtail
Ergonomic design so you don’t need tools
Spring-loaded captive cap (stays attached)
A direct replacement for the bronze and stainless traditional style garboards (520040, 520042, 520060)
Approved for all marine environments including saltwater.
Manufactured from durable marine-grade ABS + 15% fiber
NPT thread and a backup O-ring - watertight fit
2" outer diameter - fits in the same spot as your current garboard drain plug
Engineered transom gasket - no messy silicone needed
3 large individual drain cavities - plenty of flow area
|
52.80 |
|
|
Inteliplug ProXT Captive Drain Plug, Garboard Assembly, Sensor & Deutsch Plug Pigtail with Plug-and-Play Harness
The Seaview Inteliplug ProXT is a transom drain plug reimagined and engineered to be easy to use and impossible to lose.
Features:
ProXT comes with a hermetically sealed aeronautical grade sensor with a Deutsch plug pigtail
Ergonomic design so you don’t need tools
Spring-loaded captive cap (stays attached)
A direct replacement for the bronze and stainless traditional style garboards (520040, 520042, 520060)
Approved for all marine environments including saltwater.
Manufactured from durable marine-grade ABS + 15% fiber
NPT thread and a backup O-ring - watertight fit
2" outer diameter - fits in the same spot as your current garboard drain plug
Engineered transom gasket - no messy silicone needed
3 large individual drain cavities - plenty of flow area
Sensor with Deutsch DT04-2P plug pigtail including plug-and-play wire harness and alarm panel
|
129.60 |
|
|
Push-In Drain Plug for 1-1/8" Thru-Hull & All Purpose Drains
These push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains.
Plugs are a perfect compliment to T-H Marine overflow drain tubes.
These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing.
|
7.02 |
|
|
Push-In Drain Plug f/1-1/2" Thru-Hull Drains
These push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains.
Plugs are a perfect compliment to T-H Marine overflow drain tubes.
These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing.
|
11.26 |
|