|
RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System (No Base)
Unlike anything you've seen before, and performance beyond your expectations describes another great product for "Pros and Joes" alike. Integrating two sought after features into a single system makes this new Rod Holder versatile to the extreme. Offering not only the patented RAM Rubber Ball and Socket Feature, but a ratcheting feature as well, there is literally no limit to where this holder can be put or how it can be fished. With RAM, you're never limited by your mounting equipment. No matter whether you're on the water to lose stress, or gain tournament dollars, RAM Rod Holders only add to your success.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
23.08 |
|
|
RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base
The RAM-114-RBU consists of the RAM-ROD 2000 fishing rod holder, ratchet arm with single open socket and 2.5" diameter round base that contains the universal AMPS hole pattern. Offering the patented RAM rubber ball, socket and ratcheting feature, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
31.10 |
|
|
RAM-ROD® 2000 Fishing Rod Holder with RAM-ROD® Revolution Ratchet/Socket System and Track Ball™Base
The RAM-114-RB-TRA1U consists of the RAM-ROD® 2000 fishing rod holder, ratchet arm with single open socket and 1.5" Track Ball™ base for any track system including the RAM Tough-Track™. The unique ball and socket with ratcheting feature allows for 360-degree rotation of the rod holder for optimal angle adjustments while on the water.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag
|
32.27 |
|
|
RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base
The RAM-117U consists of the RAM-ROD 2000 fishing rod holder, double socket arm and 2.5" diameter round base that contains the universal AMPS hole pattern. Offering the patented RAM rubber ball, socket and ratcheting feature, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
41.44 |
|
|
RAM Tube Jr.™ Fishing Rod Holder with RAM-ROD® Revolution Ratchet/Socket System and Track Ball™ Base
Ideally suited for a wide range of applications and fishing vessels, the Tube Jr.™ Fishing Rod Holder is quickly becoming known as the most versatile rod holder on the market. This configuration includes the RAM-ROD® Revolution Ratchet Arm and 1.5” Track Ball™. Combining the RAM® rubber ball and socket system with a ratcheting feature, this rod holder has almost unlimited adjustability and configuration options. Easily collapse the rod holder down on the deck for clearing your casting path or articulate over the water, and out of your boat or kayak. Compatible with virtually any track system including the RAM Tough-Track™.
Features:
Quick release and installation
High strength materials ensure product longevity
Compatible with all RAM post spline bases
Compatible with spinning reels and level wind reels
Position spinning reel to the side or under RAM Tube Jr.
Compatible with left-handed and right-handed reels
Lifetime warranty
Made in the U.S.A.
Material:
High Strength Composite
Note:
Part number reflects product packaged in a poly bag
|
30.05 |
|
|
RAM-TUBE 2000 Holder w/RAM-ROD Revolution Ratchet/Socket System & 5 Spot Mounting Base Adapter
Material: High Strength Composite
Color: Black
|
34.75 |
|
|
RAM Mount Universal X-Grip Holder Diamond Base Surface Mount
Part #: RAM-B-102-UN7U
The RAM-B-102-UN7U consists of a double socket arm, diamond base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
48.52 |
|
|
RAM Mount Universal X-Grip™ Holder Handlebar Rail Mount
Part #: RAM-B-149Z-UN7U
The RAM-B-149Z-UN7U consists of a double socket arm, handlebar rail mount with zinc coated u-bolt base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
Samsung Galaxy S7
Samsung Galaxy S7 Edge
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
58.96 |
|
|
RAM Tube Jr. Fishing Rod Holder
Ideally suited for a wide range of applications and fishing vessels, this rod holder is quickly becoming known as the most versatile rod holder on the market. This configuration includes the RAM-ROD® Revolution ratchet arm with single open socket. Combining the patented RAM rubber ball and socket system with a ratcheting feature; this rod holder has almost infinite adjust ability and configuration options. Easily collapse the rod holder down on the deck for clearing your casting path or articulate over the water, and out of the boat or kayak. Rod holder doubles as a stake out pole holder.
Features:
1. Quick release and installation
2. High strength materials ensure product longevity
3. Compatible with all RAM post spline bases
4. Compatible with spinning reels and level wind reels
5. Position spinning reel to the side or under RAM Tube Jr.
6. Compatible with left-handed and right-handed reels
7. Lifetime warranty
8. Made in the U.S.A.
Material:
High Strength Composite
Weight:
1.0 lbs.
|
20.99 |
|
|
RAM Tube Jr. Rod Holder
Description:
Ideally suited for a wide range of applications and fishing vessels, this rod holder is quickly becoming known as the most versatile rod holder on the market. This configuration includes the RAM-ROD™ Revolution ratchet arm with single open socket and 2.5" diameter round base with 1.5" ball. Combining the patented RAM rubber ball and socket system with a ratcheting feature; this rod holder has almost infinite adjustability and configuration options. Easily collapse the rod holder down on the deck for clearing your casting path or articulate over the water, and out of the boat or kayak. Rod holder doubles as a stake out pole holder.
Features:
1. Quick release and installation
2. High strength materials ensure product longevity
3. Compatible with all RAM post spline bases
4. Compatible with spinning reels and level wind reels
5. Position spinning reel to the side or under RAM Tube Jr.
6. Compatible with left-handed and right-handed reels
7. Lifetime warranty
8. Made in the U.S.A.
|
28.73 |
|
|
RAM-ROD 2000 Fishing Rod Holder with 1.5" Ball
The RAM-117BU consists of the RAM-ROD 2000 fishing rod holder and patented 1.5" diameter rubber ball. With the combination of the patented RAM rubber ball and socket system you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
18.88 |
|
|
RAM X-Grip II
Part #: RAM-HOL-UN8BU
Sometimes, its all about the design. If you are looking for a compact mount for your tablet without that cookie cutter shape, you've found it. The RAM X-Grip II has a clean and clever four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip II is the tablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your tablet and become the most useful accessory in your vehicle.
The RAM-HOL-UN8BU consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit of most 7" tablets.
Compatible Devices:
Amazon Kindle
Amazon Kindle Fire
Archos 7
Asus EEE Pad Memo
Barnes & Noble NOOKcolor
BlackBerry PlayBook
Dell Streak 7
HTC Flyer
Panasonic Toughpad JT-B1
Samsung Galaxy Tab (7" version)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 2.25"
(Devices 2.25" in width must be a minimum of 7" in height to fit)
Maximum Width = 5.75"
Depth = 0.875"
Features:
Spring loaded holder expands and contracts for perfect fit of your tablet
Rubber coated tips will hold your tablet firm and stable
Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts
Socket technology allows for multiple adjustment angles and articulation of your tablet
Easy access grip knobs, located on the back of the holder for quick release of your tablet
Material:
High Strength Composite with Rubber Tips
Ball Size:
1" Rubber Ball "B" Size
|
37.60 |
|
|
RAM Mount Universal X-Grip Holder Composite Surface Mount
Part #: RAP-B-138-UN7
The RAP-B-138-UN7 consists of a double socket arm, 2.5" round base base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
42.65 |
|
|
RAM Mount Universal X-Grip Holder Yoke Glare Mount
Part #: RAP-B-121-UN7U
RAM Composite Clamp Mount with Universal X-Grip™ Holder. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality composite materials insure your device is safe, secure, and within easy reach. The clamp base fits a rail or edge lip from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball giving you the ultimate double ball base. Extra ball not included with purchase of this mount.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
53.62 |
|
|
RAM Universal X-Grip® Cell Phone Holder
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Features:
Spring loaded holder expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
Single socket technology allows for multiple adjustment angles and articulation of device
Compatible Cases/Skins/Bumpers:
Artwizz
Ballistic
Belkin
BodyGlove
Case-Mate
DragonFly
Ed Hardy
FishBone
G-Mate
Griffin
iFrogz
iLuv
InCase
Incipio
Inspiretech
iSkin
Ivyskin
Krusell
Luxmo
Mobo
Monaco
Oakley
Otterbox
Seidio
SolidColors
Speck
SwitchEasy
Talon Cases
TPhone
Trident
TurtleBack
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Material:
High Strength Composite with Rubber Tips
|
23.39 |
|