Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

Ram Rod Revolution Salt Water Rod Holder Unlike anything you've seen before, and performance beyond your expectations describes another great product for "Pros and Joes" alike. Integrating two sought after features into a single system makes this new Rod Holder versatile to the extreme. Offering not only the RAM Rubber Ball and Socket Feature, but a ratcheting feature as well, there is literally no limit to where this holder can be put or how it can be fished. With RAM, you're never limited by your mounting equipment. No matter whether you're on the water to lose stress, or gain tournament dollars, RAM Rod Holders only add to your success. Features: Material: High Strength Composite and Stainless Steel; this preventing rust of the mount Fishing Recommendations: The primary intention of this mount is for salt water usage

RAM® Tube Jr.™ Rod Holder with Revolution Arm & RAM® Tough-Claw™ Base Ideally suited for a wide range of applications and fishing vessels, the Tube Jr.™ Fishing Rod Holder is quickly becoming known as the most versatile rod holder on the market. This configuration includes the RAM ROD® Revolution Ratchet Arm and 1.5” Tough-Claw™. Combining the RAM® rubber ball and socket system with a ratcheting feature, this rod holder has almost unlimited adjustability and configuration options. Easily collapse a spinning reel or bait caster down on the deck to clear the casting path or articulate over the water. Compatible with virtually any kayak and the OtterBox Venture Cooler. Specifications: Clamp Range (inches): 1" - 1.6" diameter Ball Size: C Size (1.5") Weight Capacity: Standard Use: 4 lbs; Heavy-Duty Use: 3 lbs Materials: High-strength composite Packaging Type: Polybag Weight: 1.68 lbs.

RAM Tube Jr. Rod Holder Description: Ideally suited for a wide range of applications and fishing vessels, this rod holder is quickly becoming known as the most versatile rod holder on the market. This configuration includes the RAM-ROD™ Revolution ratchet arm with single open socket and 2.5" diameter round base with 1.5" ball. Combining the patented RAM rubber ball and socket system with a ratcheting feature; this rod holder has almost infinite adjustability and configuration options. Easily collapse the rod holder down on the deck for clearing your casting path or articulate over the water, and out of the boat or kayak. Rod holder doubles as a stake out pole holder. Features: 1. Quick release and installation 2. High strength materials ensure product longevity 3. Compatible with all RAM post spline bases 4. Compatible with spinning reels and level wind reels 5. Position spinning reel to the side or under RAM Tube Jr. 6. Compatible with left-handed and right-handed reels 7. Lifetime warranty 8. Made in the U.S.A.

Ram Rod Unpackaged 2000 Holder With Bulkhead Mount The RAM-114-BU, high strength composite fishing rod holder with bulkhead base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Features: Material: High Strength Composite Finishing Recommendations: The primary intention of this mount is for either fresh water or salt water usage

Ram Rod 2000 Holder Unpackaged With Deck & Track Mount The RAM-114-DU, high strength composite fishing rod holder with deck track base, is a must have for the fishing enthusiast. Designed to mount onto a horizontal surface in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Features: Material: High Strength Composite Fishing Recommendations: The primary intention of this mount is for either fresh or salt water usage

RAM-ROD™ 2007 Fly Rod Jr. Fishing Rod Holder w/ Flat Surface Rectangle Base RAM designs fishing rod holders like nobody else. Take a look at the original RAM ROD series released in the year 2000. This unique concept did a whole lot more that just support a fishing rod. Allowing a quicker response to strikes and elevating the rod to a comfortable height spelled success for Fisherman everywhere. Keeping with that tried and true design, RAM now offers the RAM Rod 2007 series. Ideally suited for vessels as small as kayaks, to larger Tournament or Charter boats, this new line of products is guaranteed to please. Incorporating our one of a kind and ball and socket feature, perfect adjustment is a breeze and setting the hook could not be faster. When it comes to price, form, function, and don't forget fun, RAM is the one to get the job done! Features: Dimensions: Inner Diameter (ID) = 1.25, Length (L) = 7, Height (H) = 9, Width (W) = 3.2 Material: High Strength Composite Fishing Recommendations: The primary intention of this mount is for either fresh water or salt water usage

RAM® Tab-Lock™ Tablet Holder for 10" Tablets with Case + More  The RAM® Tab-Lock™ spring-loaded, quick-release cradle with a keyed lock offers a secure fit with easy access to the mounted tablet. The keyed lock offers theft deterrence and unwanted tampering in public settings. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab 4 10.1 and Tab S 10.5 with an Otterbox Defender case, but also support many other tablet models and industrial tablet PCs. The spring-loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The included back plate is interchangeable with various-size support cups, making it compatible with numerous tablet models. The detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. A set of four nuts and bolts is included to connect the cradle to any RAM components or mounts that contain the universal AMP hole pattern. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. The product consists of a holder only. Case not included. Features: Locking mechanism for theft deterrence Support cups contain open slots to accommodate tablets of various sizes The back plate can support various sizes of cups Spring-loaded tension provides secure support and quick release for your tablet Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (2) #8 x 5/8" Sheet Metal Screws, (2) M4 x 32mm Machine Screws, (2) M4 Nylock Nuts, (2) Keys Holder Dimensions: Height Range: 9.64" - 12.32", Width Range: 6.13" - 7.4", Depth Range: .13" - .7" Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" Materials: High-strength composite Packaging Type: Poly Bag Weight: 1.25 lbs

RAM ROD® Fishing Rod Holder with 6" Spline Post  The RAM ROD® Fishing Rod Holder with 6" Spline Post (RAM-114-NBU) is made of high-strength composite and has a 6" spline post, making it a must-have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. This fishing rod holder is compatible with a variety of spline post bases and is backed by a lifetime warranty.  Specifications: Product Dimensions: Post Length 6" Materials: High-strength composite Packaging Type: Poly Bag Weight: 0.77 lbs Components: RAP-114-P6U - RAM ROD® Long Spline Post with Knob

RAM ROD® Fishing Rod Holder with Dual T-Bolt Track Base This track mounting solution includes the high-strength composite RAM ROD® fishing rod holder, 6” spline post, and dual T-bolt track base. Compatible with the RAM® Tough-Track™ and designed to not loosen while trolling, this track base makes an excellent addition to the left side of a boat. Paired with the included spline post, easily rotate the RAM ROD® fishing rod holder 360 degrees while tilting the cradle forward and back to achieve the ideal angle. Features: Kit includes RAM ROD® fishing rod holder, 6" spline post, and dual T-bolt track base Compatible with all versions of the RAM® Tough-Track™ RAM ROD® fishing rod holder can be rotated 360 degrees and tilted to achieve the desired angle Backed by a lifetime warranty Specifications: Hardware Included: (2) 1/4"-20 x 7/8" T-Bolts; (2) 1/4"-20 Knobs Product Dimensions: 6 in. post length  T-Bolt Dimensions: 0.48 x 0.95 inches Hole Pattern: 3.5 inches Materials: High-strength composite Packaging Type: Retail bag Weight: 1.11 lbs.

RAM-ROD 2000 Fishing Rod Holder with 6" Spline Post (No Base) The RAM-114-NB, high strength composite fishing rod holder and 6" spline post, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Material: High Strength Composite Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Tube Jr. Rod Holder Description: Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Post Spline Length: 6" Features: 1. Quick release and installation 2. High strength materials ensure product longevity 3. Compatible with all RAM post spline bases 4. Compatible with spinning reels and level wind reels 5. Position spinning reel to the side or under RAM Tube Jr. 6. Compatible with left-handed and right-handed reels 7. Lifetime warranty 8. Made in the U.S.A. Ram Adapt-A-Post™ Quick Release Track Base The RAM Adapt-A-Post™ Quick Release Track base is available to mount the full line of RAM Post and Spline rod holders, for your heavier fishing rod set-ups. Designed to accommodate most kayak tracks, quickly fasten and adjust the base to your existing track system or add a track system to your kayak set up. Popular tracks include Yakattack's GearTrac System, Wilderness Systems SlideTrax and common T-Slot Track Systems. To adjust, simply depress the release buttons and turn the Adapt-A-Post™ counter-clockwise. The base will slide along the track, giving you the ultimate flexibility in repositioning your rod holder or mounted device. The RAM Quick Release Track base can be installed at any point along the track without the need to feed in from one end of the track. A necessity for all fishing enthusiasts, the RAM Quick Release Track Base is certain to create more mounting options on whatever you choose to take to the water. Compatible Tracks: YakAttack GearTrac, Wilderness Systems SlideTrax, Most Common T-TracksScotty Slide Track, Many More!

RAM Tube Jr. Rod Holder Description: Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Post Spline Length: 4" Features: 1. Quick release and installation 2. High strength materials ensure product longevity 3. Compatible with all RAM post spline bases 4. Compatible with spinning reels and level wind reels 5. Position spinning reel to the side or under RAM Tube Jr. 6. Compatible with left-handed and right-handed reels 7. Lifetime warranty 8. Made in the U.S.A. Ram Adapt-A-Post™ Quick Release Track Base The RAM Adapt-A-Post™ Quick Release Track base is available to mount the full line of RAM Post and Spline rod holders, for your heavier fishing rod set-ups. Designed to accommodate most kayak tracks, quickly fasten and adjust the base to your existing track system or add a track system to your kayak set up. Popular tracks include Yakattack's GearTrac System, Wilderness Systems SlideTrax and common T-Slot Track Systems. To adjust, simply depress the release buttons and turn the Adapt-A-Post™ counter-clockwise. The base will slide along the track, giving you the ultimate flexibility in repositioning your rod holder or mounted device. The RAM Quick Release Track base can be installed at any point along the track without the need to feed in from one end of the track. A necessity for all fishing enthusiasts, the RAM Quick Release Track Base is certain to create more mounting options on whatever you choose to take to the water. Compatible Tracks: YakAttack GearTrac, Wilderness Systems SlideTrax, Most Common T-TracksScotty Slide Track, Many More!

RAM ROD® Fishing Rod Holder with Plunger Bulkhead Base The RAM-114-BMP consists of the RAM ROD® Fishing rod holder with a 6" long spline post and a bulkhead base that is suitable for horizontal or vertical surfaces. Specifications: Product Dimensions: 6 in. post length  Hole Pattern: 1.3 x 3.19 inches Materials: High-strength composite Packaging Type: Retail header card Weight: 1.2 lbs.

RAM Tube Jr. Fishing Rod Holder with Short 4" Length Post Spline & Flush Mounting Base Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Base Description: The flush mounting base contains 4 pre-drilled holes and a socket compatible with RAM-ROD and RAM-TUBE holders with a spline post. Post Spline Length: 4" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.