2.2lb Bruce Anchor Coastal anchoring can be tough with anything other than the YakGear 2.2lb (1kg) Bruce Anchor. This 2.2-pound (1kg) galvanized steel plow anchor is the preferred anchor choice for coastal and near-shore fishermen. The plow-shaped design allows the anchor to dig easily into the sand, silt, and muddy bottoms.  Features: 2.2lb galvanized steel Bruce Anchor Self-orienting 1-year warranty Note: It is recommended to use at least 3 times the depth of water as the length of the anchor rope in calm waters and 4 to 5 times the depth of the water in choppy waters or windy conditions.

Description: 304 S.S. Bruce Anchor Roller - 9' to 30' Boat. Dimensions: L: 15" W: 2"

Description: 304 S.S. Bruce Anchor Roller - 28' to 48" Boat. Dimensions: L: 23-1/4" W: 4"

3.3lb Grapnel Anchor Kit with Storage Bag Anchor a kayak, canoe, or small boat worry-free with the YakGear 3.3-pound (1.5kg) Grapnel Anchor Kit. This 3.3-pound (1.5 kg) galvanized steel anchor features four 6-inch tines that fold out of the way while stored for space maximization and release when ready for use. The heavy head design of the anchor creates less wait time until the anchor is fully submerged into the anchoring surface in deeper and faster-moving water. 30 feet of 3/16-inch black nylon anchor rope and a storage ditty bag are included. Features: 3.3 lb. galvanized steel Grapnel Anchor Four folding 6" tines for easy storage Locks in an open or closed position A heavy head allows for easier anchoring 30 ft. nylon diamond braid rope Storage bag included 1-year warranty Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions

5lb Mushroom Anchor The YakGear 5-pound Mushroom Anchor is perfect for anchoring kayaks, canoes, stand-up paddleboards, and even jon boats in muddy, sandy, or weeded bottoms. The high-level holding strength provides additional security with a wide-area mushroom cap with drains in the base. Shaped like an inverted mushroom, the head becomes buried in the soft seabed and will normally sink to the point where it has displaced its own weight in the seabed material. Its one-piece cast iron construction combined with a tough vinyl coating ensures long-lasting, dependable use. The anchor is very popular for fishermen and race buoys. Features: 5 lb. inverted mushroom-shaped anchor Cast iron and vinyl coated in black 1-year warranty

1.5lb Grapnel Anchor Kit with Storage Bag Catch the big fish while anchored with the little anchor kit with the complete YakGear 1.5-pound Grapnel Anchor Kit. This 1.5-pound (.7 kg) galvanized steel anchor features four 3.5-inch tines that fold out of the way while stored for space maximization and release when ready for use. While it may seem small, a 1.5 lb. anchor is a more than adequate weight for kayaks and canoes in rivers, lakes, and slower-moving water. Includes 30 feet of 3/16-inch black nylon diamond braid anchor rope and a storage bag.  Features: 1.5 lb. galvanized steel Grapnel Anchor Four folding 3.5 in. tines for easy storage Locks in open or closed position 30 ft. nylon diamond braid rope Storage bag included 1-year warranty Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions

Deluxe Anchor Trolley with Pulleys The Deluxe Anchor Trolley will help users stop being victims of changing winds and currents while fishing in an anchored position. The YakGear Deluxe Anchor Trolley Kit allows the deployment of any anchor, drift chute, or stake-out pole before judging the current and wind while still remaining in a favorable fishing position. Without a trolley, users are limited to anchoring where it is reachable, causing the boat to swing back and forth. Mounted just off of the gunwale of any kayak or canoe, the deluxe trolley kit uses a nylon pulley system to select a desirable position anywhere from bow to stern, then maintains the positioning through the use of a 2-5/16-inch mini zig-zag cleat. The deluxe system uses Harken pulleys to seamlessly pass trolley rope from bow to stern without the standard rubbing of rope along slightly less smooth pad eyes. The mounted pulleys are raised off of the boat enough to eliminate any unnecessary rubbing or scratching of the boat.  As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone and anchors are recommended but not included. Features: Deluxe anchor trolley system with Harken pulleys It allows the bow of your vessel to turn into the current for a smoother experience A mini zig-zag cleat is included, assisting in maintaining stable positioning Installation instructions and hardware are included The kit also includes 30 ft. of rope 1-year warranty

Ampco Pumps P1GX101715 Front Bearing

Guardian G-85 Anchor - 42lb Guardian anchors benefit from years of Fortress research and development, offering excellent quality, performance, and economy.  These anchors are manufactured from the same corrosion-resistant, high-tensile aluminum magnesium alloy as Fortress, which makes them stronger and lighter than competitive steel anchors. With Guardian anchors, several Fortress machining steps and extra features, such as anodizing and adjustable fluke angles, are eliminated.  The Guardian Anchor is limited to one, single, 32-degree angle, which will work for most common sea bottoms.  The result is a high-performance anchor that is engineered for fast setting and strong holding power, and a very affordable alternative to those heavy, rust-prone steel anchors. As strong as steel, but only half the weight, Guardian anchors are second only to Fortress FX model in holding power tests. They make an excellent spare or storm anchor for your boat or yacht. *Made in the U.S.A. Features: Fortress high-tech aluminum alloy Rust-proof and non-magnetic materials Easily assembles and disassembles for convenient storage No failing welded pieces Easy to manage weight Replaceable parts Technical Specifications: Size of Boat - 54' to 62' (16 to 19 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 4,625lbs (2,098kg) Shank Length - 48" (1,219mm) Fluke Length - 28" (711mm) Stock Length - 39" (991mm) Weight - 42lbs (19kg) *Sold as an Individual

3lb Economy Folding Anchor Kit Sea-Dog's Economy Folding Anchor Kit includes everything users need to get started. It comes complete with the popular 3.5 lb. folding anchor, 20' of 3/16" line, and a handy mesh bag. Features: Constructed of hot-dipped galvanized iron with forged flukes Specifications: Size of Hole for Anchor Rope: 1/2 in. Included Anchor Line: 20 ft. Weight: 3.5 lbs

 2 Leash Combo for Paddle & Pole Keep a paddle or rod secure while paddling with the YakGear UniLeash. Quickly connecting the leash to the boat-side is done with a 360-degree nylon swivel hook to any pad eye or accessible seat strap. The connection to the paddle or rod is made through the upper-rope-loop-through method, which provides unrestricted movement while using a paddle or fishing rod. Perfect for one or two-piece paddles as well as one or two-piece rods. Paddle and rod are not included. Features: Two-leash combo 1/2-ounce, 40-in. paddle leashes Made from 3/16 in. nylon bungee and 1/8 in. polypro rope 360° Swivel Hook Instructions included 1-year warranty

The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original and proven features including rode management technology developed by Maxwell. HRC6 Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation High efficiency spur gearbox incorporating a robust non-backwind mechanism High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch Emergency "free fall" function in the event of onboard power failure Revolutionary new chainwheel - see over Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass 'free fall' lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the 'free fall' device automatically disengages allowing you to power up your anchor Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection Specifications: Model: HRC6 Maximum Pull: 900lbs Chain Short Link: 1/4" Rope Size (Nylon): 1/2" Line Speed(Anchor Retrieval): 108'/min Power Supply(DC): 12V or 24V Motor Power: 600W Net Weight: 25lbs This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Guardian G-5 Anchor - 2.5lb Guardian anchors benefit from years of Fortress research and development, offering excellent quality, performance, and economy.  These anchors are manufactured from the same corrosion-resistant, high-tensile aluminum magnesium alloy as Fortress, which makes them stronger and lighter than competitive steel anchors. With Guardian anchors, several Fortress machining steps and extra features, such as anodizing and adjustable fluke angles, are eliminated.  The Guardian Anchor is limited to one, single, 32-degree angle, which will work for most common sea bottoms.  The result is a high-performance anchor that is engineered for fast setting and strong holding power, and a very affordable alternative to those heavy, rust-prone steel anchors. As strong as steel, but only half the weight, Guardian anchors are second only to Fortress FX model in holding power tests. They make an excellent spare or storm anchor for your boat or yacht. *Made in the U.S.A. Features: Fortress high-tech aluminum alloy Rust-proof and non-magnetic materials Easily assembles and disassembles for convenient storage No failing welded pieces Easy to manage weight Replaceable parts Technical Specifications: Size of Boat - 12' to 16' (4 to 5 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 350lbs (159kg) Shank Length - 19" (483mm) Fluke Length - 11" (279mm) Stock Length - 16" (406mm) Weight - 2.5lbs (1.1kg) *Sold as an Individual

Guardian G-7 Anchor - 2.9lb Guardian anchors benefit from years of Fortress research and development, offering excellent quality, performance, and economy.  These anchors are manufactured from the same corrosion-resistant, high-tensile aluminum magnesium alloy as Fortress, which makes them stronger and lighter than competitive steel anchors. With Guardian anchors, several Fortress machining steps and extra features, such as anodizing and adjustable fluke angles, are eliminated.  The Guardian Anchor is limited to one, single, 32-degree angle, which will work for most common sea bottoms.  The result is a high-performance anchor that is engineered for fast setting and strong holding power, and a very affordable alternative to those heavy, rust-prone steel anchors. As strong as steel, but only half the weight, Guardian anchors are second only to Fortress FX model in holding power tests. They make an excellent spare or storm anchor for your boat or yacht. *Made in the U.S.A. Features: Fortress high-tech aluminum alloy Rust-proof and non-magnetic materials Easily assembles and disassembles for convenient storage No failing welded pieces Easy to manage weight Replaceable parts Technical Specifications: Size of Boat - 17' to 22' (5 to 7 M) Style - Fluke Material - Aluminum magnesium alloy Working Load - 575lbs (261kg) Shank Length - 22" (559mm) Fluke Length - 13" (330mm) Stock Length - 18" (457mm) Weight - 2.9lbs (1.3kg) *Sold as an Individual

Anchor Rode 15’ 5/16” G4 Chain with 300’ 1/2” Rope An anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation. Features: High-strength, welded chain rated to high-test G4 specs  Hot-dip-galvanized chain links to minimize corrosion Calibrated for an even pitch Smooth rope-to-chain transition for seamless windlass operation Treated, windlass-grade, 3-strand, twisted nylon rope Fitted to all Lewmar windlasses and rope chain gypsies Works With: Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlasses Specifications: Rope: 300 ft. 1/2 in. 3-strand nylon  Chain: 15 ft. 5/16” G4 chain