|
Pontoon Boat Cover Support System
Extend the life of your pontoon boat cover by preventing water from pocketing. This easily installed system includes two adjustable support poles (bright dip anodized-snap ends). Poles adjust from 27" to 50" maximum height. 60ft of 1" polypropylene webbing, quick release adjuster buckles and four injection molded hooks to secure to decking.
|
83.10 |
|
|
Pontoon Boat Cover Support
The Pontoon Boat Cover Support brings an easy-to-use telescoping support system that keeps your pontoon boat cover from sagging and allowing water to pool. When rain don't pool and go stagnant in your boat cover, that helps to extend the life of the material. The Camco Pontoon Boat Cover Support sports a self-standing design with support plates on the tops and bottoms. The bottom support plates have foam pads to protect the boat and prevent shifting. Adjusts height easily from 30"–50" in 2.5" increments, and contains two 33' straps with durable hooks. Fits most pontoon boats with up to a 33' deck length. Installs easily and stores compactly when not in use.
Features:
Telescoping support system to prevent your pontoon boat cover from sagging and taking on water
Helps to extend the life of boat-cover material
Self-standing design
Support plates on tops and bottoms
Pads on bottom plates to protect boat and prevent shifting
Adjusts easily from 30"–50"H in 2.5" increments
Two 33' straps with durable hooks
Installs easily
Stores in minimal space when not in use
|
104.74 |
|
|
Adjustable Boat Cover Support Kit
The Boat Cover Support is an easy to use telescoping support system that keeps your boat cover from sagging and allowing water to pool. When rain doesn't pool and go stagnant in your boat cover, it helps extend the life of the material. The Boat Cover Support is self-standing with support plates on the top and bottom, the bottom support plate also has a foam pad to prevent sliding and protect the boat. The Boat Cover Support adjusts heights easily from 30" to 50" in 2.5" increments to accommodate different styles of boats. The nylon strap assembly is 50' long and fits most boats up to 22' in length. It is easy to install and stores compactly when not in use. Camco also makes a full line of attachments that can be purchased and used with the telescoping support pole.
Features:
Helps prevent water from pooling in low places on boat cover
Helps maintain the quality of your boat cover
Height adjusts 30" to 50" to fit different boat styles
Fits most boats up to 22' long
Easy to install
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
51.56 |
|
|
Pontoon Gazebo - Pacific Blue
A quick and easy way to gain additional shaded area on your pontoon boat. Top accommodates both 96" and 102" wide boats and extends out to 8ft. of coverage. Constructed from Hot Shot marine grade polyester fabric, the top is strong yet lightweight. It is supported by shock-corded fiberglass pole framework that breaks down for convenient storage. The large interior radius allows you to sit comfortably without bending over and provides excellent headroom. After initial installation of permanently mounted hardware to your playpen rail, the Pontoon Gazebo attaches easily and comes down in minutes. Comes complete with shade top, frame, marine grade hardware and storage bag, and is available in nine colors to best match your boat. The gazebo measures 9' long by 102" wide by approximately 50" high from mounting point.
|
189.95 |
|
|
Pontoon Gazebo - Navy
A quick and easy way to gain additional shaded area on your pontoon boat. Top accommodates both 96" and 102" wide boats and extends out to 8ft. of coverage. Constructed from Hot Shot marine grade polyester fabric, the top is strong yet lightweight. It is supported by shock-corded fiberglass pole framework that breaks down for convenient storage. The large interior radius allows you to sit comfortably without bending over and provides excellent headroom. After initial installation of permanently mounted hardware to your playpen rail, the Pontoon Gazebo attaches easily and comes down in minutes. Comes complete with shade top, frame, marine grade hardware and storage bag, and is available in nine colors to best match your boat. The gazebo measures 9' long by 102" wide by approximately 50" high from mounting point.
|
189.95 |
|
|
Pontoon Gazebo -Sand
A quick and easy way to gain additional shaded area on your pontoon boat. Top accommodates both 96" and 102" wide boats and extends out to 8ft. of coverage. Constructed from Hot Shot marine grade polyester fabric, the top is strong yet lightweight. It is supported by shock-corded fiberglass pole framework that breaks down for convenient storage. The large interior radius allows you to sit comfortably without bending over and provides excellent headroom. After initial installation of permanently mounted hardware to your playpen rail, the Pontoon Gazebo attaches easily and comes down in minutes. Comes complete with shade top, frame, marine grade hardware and storage bag, and is available in nine colors to best match your boat. The gazebo measures 9' long by 102" wide by approximately 50" high from mounting point.
|
189.95 |
|
|
Pontoon Curved Corner-Gard - 3"W x 12"L
This unique Corner-Gard offers a level of protection to areas on the Pontoon boat other fenders or bumpers can't provide. The Pontoon Corner-Gard comes shaped to mount on either a radius style or 90o pontoon corners. The Corner-Gard mounts over the original factory installed aluminum corner section to provide air-cushioning impact protection when docking. Special silver PVC formulated to match the aluminum color of the boat and secures with the included stainless fasteners.
Specifications:
Dimensions: 3"W x 12"L
Mounting hardware included
|
29.34 |
|
|
Pontoon Rail Fender Adjuster - 4-Pack
Finally, a fender adjuster designed specifically for the 1" square tube rails of Pontoon Boats. The mounting structure clamps securely to square tubing yet can be repositioned quickly and easily. Constructed from durable ABS plastic, this fender adjuster allows for simple height adjustment for lines up to 3/8".
|
22.88 |
|
|
SnapIt! Marine P0011 Folding Lunch Table for Pontoon Boats
This Folding Lunch Table for Pontoon Boats measures 21”x13.5”. Lunch table mounts permanently to 1 ¼” square rail commonly found on pontoon boats. Self supporting it folds down and out of the way when not needed.
No drilling required. All mounting hardware included. Color: White.
Custom made at time of order, none returnable.
|
169.00 |
|
|
Pontoon 24" Flag Pole Mount & 12" x 18" US Flag
Developed with the Pontoon Boater in mind, this injection molded, black nylon mount attaches easily to the top of your pontoon railing and features a 10° presentation angle. The 3/4" diameter bright dipped anodized aluminum pole simply snaps into the base and features color matched Charlevoix flag clips.
The 24" model includes a 12" x 18" sewn U.S. Flag.
|
53.40 |
|
|
Pontoon 30" Flag Pole Mount & 16" x 24" US Flag
Developed with the Pontoon Boater in mind, this injection molded, black nylon mount attaches easily to the top of your pontoon railing and features a 10° presentation angle. The 3/4" diameter bright dipped anodized aluminum pole simply snaps into the base and features color matched Charlevoix flag clips.
The 30" comes complete with a 16" x 24" sewn U.S. Flag.
|
67.16 |
|
|
Straps Support System with Support Pole
Eliminates virtually all possible areas that could collect water and allow it to pool, causing damage to the cover. This system is designed for simplicity with two pre-installed, adjustable 20-foot straps that snap quickly to the rear tow hooks and one 40-foot adjustable strap to cradle the bow. System fits up to 28-foot boats. For pontoon boats, two systems are required and can easily be joined to create a perfect “frame” for the pontoon cover. Each system comes with one adjustable (40″ to 70″) support pole, system center, strap set and simple installation instructions.
|
43.31 |
|
|
Flex-Fit™ PRO Polyester Size 9 Boat Cover for Pontoon Boats - Grey
*20'-22' Centerline Length
*102" Max Beam Width
Available in 10 sizes that fit practically all 14 – 23 foot boats. Economically priced, our Flex-Fit™ PRO universal cover is an excellent choice for storage and trailering. Our Flex-Fit™ PRO boat covers feature a strong and durable 1/4″ shock cord encased into the hem for a snug fit. One tie-down kit is included for quick and easy tie-down. Mesh Storage bag is included.
Poly-Flex II - Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty).
Boat Types:
Pontoon Boats
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
249.96 |
|
|
T-Top Boat Semi-Custom Cover 23'5" - 24'4" x 102" - Blue
This semi-custom cover is specifically designed to fit a Center Console T-Top with an outboard engine which is from 23'5" to 24'4" with a beam of 102". It features Gore Tamara threaded seams and a 5-year warranty.
Taylor boat covers come in three levels of customization: Universal, Semi-Custom and Custom. The semi-custom covers are designed for trailering over 30 different hull shapes, from paddle boats to competition ski boats. There are many differences between each variety of cover in regards to what dimensions or accessories they will accommodate. Universally, though, they feature sewn in tie-down loops, a double-folded hem with an integrated shock-cord and 4-ply seams. These boat covers feature Gore Tamara thread in their seams which will not stain, mold, mildew or discolor -- it will outlast the material it is sewn into. Please note that these covers generally aren't made to fit aftermarket swim platforms. Also, please note that this cover doesn't come with a motor hood.
Specifications
Bow and stern sections zip together for single-person installation.
"Console tube" secures up underneath the T-Top. protects the center console and will accommodate most sizes and positions of tops and consoles on boats up to 25'4".
Tie-Downs System included - system relieves stress on the zippered ends during over-the-road trailering.
Now available for boats without bow rails.
Standard patterns include cut out for single outboard.
|
595.78 |
|
|
Sun-DURA® Styled-to-Fit Boat Cover for 16.5' Pontoons with Bimini Top and Rails - Grey
*102" Max Beam Width
Better known as “semi-custom” covers, Styled-to-Fit boat covers are our best selling, most popular category of covers and for good reason. Value. Our Styled-to-Fit boat covers are designed to accommodate all popular hull styles and boat configurations. For example, a 21' V-Hull Runabout boat cover will fit a 21' V-Hull Runabout Sea Ray, Bayliner, Four Winns, Stingray, etc. The cover is not “custom” to the specific boat, but a highly fitted cover designed to accommodate the primary characteristics of the boat style. Our Styled-to-Fit boat covers are great for travel*, mooring and storage, and feature:
1/4″ strong & durable shock cord encased into hem for a snug fit
Motor covers are sewn into outboard model boat covers. Some designs come with a separate motor cover
*Trailerable boat covers must be properly installed and tied down.
From Pontoon Boats to Tournament Ski Boats, Jon Boats to Center Console Fishing Boats, Carver has a Styled-to-Fit boat cover that’s right for you!
Sun-DURA®
Excellent Quality
100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
394.85 |
|