Bike Speed Sensor 2 & Cadence Sensor 2 Bundle Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge® cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+® connectivity and BLUETOOTH® Low Energy technology.  With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Water Speed Sensor (4-Pin) f/echo™ Series Fishfinders Easily collect speed data and send it to your echo™ fishfinder with our water sensor. Simply mount our speed sensor on the transom of your vessel and connect it to your device. The paddle wheel on the speed sensor turns as the vessel moves through the water, and speed data is collected and displayed on your device. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bike Cadence Sensor 2 Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Transom Mount Speed Sensor Transom-mount paddle wheel 3.1 m (10ft) cable with Micro-C connector. Features Replaces EP-70 Outputs speed through water Transom-mount paddle wheel Ideal for slow, trolling speeds, where GPS is not as accurate Share paddle wheel speed to any networked display, unlike sonar based paddlewheel sensors

H3000 Speed Sensor - Plastic Flush Features: Plastic Flush Housing Integrated Sea Temperature sensor Self-Closing valve to enable easy removal of sensor Dimensions:138mm total/88mm housing  Construction: Plastic

Temp/Speed Sensor Temperature range of 25-99.9 degrees F. Speed range of 2-75 MPH.     Note: Requires purchase of AS T Y cable to connect with HELIX 5 Series, HELIX 7 Series, 600 Series, select 700 HD Series, 8x9 ci Series, 9x9 ci Series and 11x9 ci Series. 1-Year Limited Warranty Compatibility: Current Models: HELIX 10, HELIX 12, HELIX 5, HELIX 7, HELIX 9, SOLIX 12, SOLIX 15  Discontinued Models: 1100 Series, 500 Series, 600 Series, 700 Series, 800 Series, 900 Series, ONIX  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

inReach® Mini 2 Marine Bundle - Flame Red This compact satellite communicator1 marine bundle helps you stay connected to loved ones back home when you’re off the grid — adding peace of mind to every boating adventure. Features: Global satellite coverage keeps you connected when cellphones can’t. In an emergency, send an interactive SOS message to our coordination center. You can still connect to the ones who matter, even without cellphone coverage. With TracBack® routing, find your way back if you happen to get lost. Expand the capabilities of your inReach device by using the Garmin Explore™ app. Stay on adventures longer with up to 14 days of battery life in 10-minute tracking mode. MARINE BUNDLE The bundle includes a screw-down mount and power cable, so you can mount your inReach device at your helm for easy access at a moment’s notice. TWO-WAY MESSAGING Exchange text messages with loved ones back home, post to social media, or communicate inReach to inReach in the field. INTERACTIVE SOS ALERTS In case of emergency, trigger an interactive SOS message to the Garmin IERCC, a 24/7 staffed emergency response coordination center. LOCATION SHARING Share your location with loved ones back home at any time using your MapShare™ page or with your coordinates embedded in your messages. GLOBAL SATELLITE NETWORK Instead of relying on cellphone coverage, your messages, SOS alerts, and location tracking are transferred via the global Iridium® satellite network. FLEXIBLE SATELLITE AIRTIME PLANS An active satellite subscription is required to access the Iridium network and communicate with your inReach Mini 2. You can opt for an annual package or a flexible month-to-month plan. COMPACT, RUGGED DESIGN Don’t let the 4” x 2” size and 3.5 oz weight fool you. inReach Mini 2 is tough, durable, impact-resistant (MIL-STD-810), and water-rated to IPX7. AUGMENTED WITH ACCESSORIES With the optional water-resistant case, bring your inReach Mini 2 satellite communicator on your dives or other off-boat adventures. It protects your inReach Mini 2 with a water rating of 10 ATM. TRACBACK ROUTING The TracBack routing feature navigates you back to your starting point the same way you came, should you get lost — right on your device. DIGITAL COMPASS Get accurate heading information — even when you’re not moving. BATTERY LIFE The internal, rechargeable lithium battery gives you up to 14 days of use at the default 10-minute tracking mode and up to 30 days with a 30-minute tracking interval. INREACH WEATHER FORECAST SERVICE Get detailed weather updates on inReach Mini 2 or a paired compatible device. You can even request forecasts for your current location or other waypoints or destinations on your itinerary. UNLIMITED CLOUD STORAGE AND TRIP PLANNING Get free access to your computer's cloud-powered Garmin Explore website to plan your trips, create preset messages and quick texts, sync and manage your device settings, and much more. GARMIN EXPLORE APP Sync with the Garmin Explore website or the mobile app on your compatible smartphone for navigation, waypoints, courses, activities, and collections. Also, get access to trip planning and topographical mapping. OTHER GARMIN DEVICES Remotely control inReach Mini 2 to send and receive messages, start and stop tracking, and trigger an interactive SOS using compatible Garmin handhelds, wearables, or other mobile devices. GARMIN PILOT™ APP Pair with the Garmin Pilot app to easily send and receive text messages from the cockpit — even without cellular reception. The app can use the inReach Mini 2 device’s GPS position and location-sharing abilities for your flight. What's In The Box? inReach Mini 2 USB cable Spine mount adapter Marine mount and hardware Floatation lanyard 12V power cable Documentation 1 Active satellite subscription is required. Some jurisdictions regulate or prohibit the use of satellite communications devices. It is the responsibility of the user to know and follow all applicable laws in the jurisdictions where the device is intended to be used.

DX900+ Multilog Smart™ Electromagnetic Speed Sensor Thru‑Hull NMEA 0183 Say goodbye to the paddlewheel and hello to Smart® Sensor technology. The DX900+ uses electromagnetic technology to accurately measure dual-axis speed through water plus immediately calculate leeway travel. Paddlewheels need cleaning and only measure speed longitudinally. The DX900+ measures water flow at 360° and will immediately deliver the leeway data to your instrument. There are no moving parts to clean or maintain. Performance sailors, racers, or long-distance cruisers will immediately see the benefits of the accuracy and reliability of the DX900+. The DX900+ is available as a Speed and Water-temperature sensor. Features: Electromagnetic dual-axis speed, and water temperature with no moving parts Measures transverse and longitudinal speed that instantaneously calculates leeway angle and speed through water with no latency Connects and shares data wirelessly with AIRMAR’s CAST™ app. Perfect for displaying performance data on phones or tablets, plus makes calibration fast and easy. Outputs heel and trim The sensing pins in contact with the water are made from very high-quality alloy, allowing very stable measurements and high resistance to corrosion. (Do not use any bottom paint on exposed sensing pins.) Thru-hull, low-profile housing with water valve Retractable insert for safe storage Available in a plastic (P717V) or stainless steel (SS617V) housing Retrofits to existing P617V housing Specifications: Weight (sensor, box, and cable): Plastic—1 kg (2.3 lb.) Stainless steel—2 kg (4.4 lb.) Hull Material: Plastic housing for fiberglass or metal hull/Stainless steel housing compatible with all hull materials Deadrise Angle: Up to 22° Hole Diameter: Fiberglass or wood—51 mm or 2", Stainless steel housing in metal hull—57 mm or 2-1/4" Transverse Speed Range: ±6 knots Longitudinal Speed Range: ±60 knots Accuracy of Transverse and Longitudinal Speed: ±0.1 knots for speeds under 10 knots, ±1% for speeds above 10 knots Display Resolution: 0.01 knots Outputs: NMEA 0183—speed and temperature Configurable Data Update Rate: Up to 10 Hz Operating Temperature Range: -15°C to 55°C (5°F to 131°F) Water Temperature Accuracy: +0.5°C (+1.0°F) Power: Supply Voltage: 9 to 16 VDC Average Power Consumption: NMEA 0183 - 2.5 W Standard Cable Length: NMEA 0183 - 6M (20') Includes: Blanking plug CE Compliant: Yes to IEC60945 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

GP1170-06 SystemPod Pre-Cut for Garmin 1020/1020xs/1040xs & 2 Instruments for 9.5" Wide Guard NavPod GP1170 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.750"H x 23.25"W x 6.75"D Usable Face: 9.9"H x 20.5"W x 5.375"D Max Cutout: 9.125"H x 20"W Instrument Cutout: 3.6" All SystemPods include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

GP2170-06 SystemPod Pre-Cut for Garmin 1020/1020xs/1040xs & 2 Instruments for 12" Wide Guard NavPod GP2170 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.750"H x 23.25"W x 6.75"D Usable Face: 9.9"H x 20.5"W x 5.375"D Max Cutout: 9.125"H x 20"W Instrument Cutout: 3.6" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

GP1088 SystemPod Pre-Cut for Garmin 820/820xs/840xs & 2 Instruments for 9.5" Wide Guard GP1080 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.5"H x 19.75"W x 6.5"D Usable Face: 9.5"H x 17"W x 5.5"D Max Cutout: 9.375"H x 17"W Instrument Cutout: 3.6" All SystemPods include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

GP2080-13 SystemPod Pre-Cut for Garmin 820/820xs/840xs & 2 Instruments for 12" Wide Guard GP2080 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.5"H x 19.75"W x 6.5"D Usable Face: 9.5"H x 17"W x 5.5"D Max Cutout: 9.375"H x 17"W Instrument Cutout: 3.6" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

Fuel Flow Sensor - 2-100 LPH Features: Flow Range: 2 LPH to 100 LPH (0.53 GPH to 26.4 GPH) All M1AR fuel flow sensor accessories for the FFM100 are fitted with 1/4" NPT female threads Nominal K Factor: 1000 pulses/L (3785.4 pulses/Gal) Cable Length: 1m (3.28') Strainer Size: 200 Mesh (If not already installed after fuel filter) Port Size: 1/4" NPT Female Maximum Viscosity: 1000 cPs Maximum Operating Pressure: 68.95 Bar (1000 PSI) Weight: 775g (1.71 lb) Construction: Aluminum Housing Material Rotors: PPS (Ryton) Shafts: 316/304 Stainless Steel Magnets: Samarium Cobalt O-Ring: FKM (Viton™) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GT36-TM & GT8HW-IH Transducer Bundle Perfect for the coastal and offshore fisherman who wants CHIRP traditional sonar and CHIRP ClearVü and CHIRP SideVü scanning sonar, these bundles consistently display clear and crisp fish arches with superior target separation as well as clear definition of objects, structure, and fish that pass below and to the side of the boat. These bundles include the GT36-TM transom mount transducer which offers ultimate versatility, featuring Ultra High-Definition ClearVü and SideVü scanning sonars for crystal-clear images of fish and structure, so you can spend more time catching fish. Both bundles help you maintain accurate depth readings at high speed, are intended for boats with fiberglass hulls, and include the y-cable required for installing both transducers. Features: Choose the bundle with the GT15M-IH in-hull transducer, featuring mid-band CHIRP traditional sonar, if you have a boat with a fiberglass hull and a deadrise from 0° to 25° Choose the bundle with the GT8HW-IH transducer, featuring high-wide CHIRP traditional sonar, if you have a boat with a fiberglass hull and a deadrise of 0° to 6°

GT36-TM & GT15M-IH Transducer Bundle Perfect for the coastal and offshore fisherman who wants CHIRP traditional sonar and CHIRP ClearVü and CHIRP SideVü scanning sonar, these bundles consistently display clear and crisp fish arches with superior target separation as well as clear definition of objects, structure, and fish that pass below and to the side of the boat. These bundles include the GT36-TM transom mount transducer which offers ultimate versatility, featuring Ultra High-Definition ClearVü and SideVü scanning sonars for crystal-clear images of fish and structure, so you can spend more time catching fish. Both bundles help you maintain accurate depth readings at high speed, are intended for boats with fiberglass hulls, and include the y-cable required for installing both transducers. Features: Choose the bundle with the GT15M-IH in-hull transducer, featuring mid-band CHIRP traditional sonar, if you have a boat with a fiberglass hull and a deadrise from 0° to 25° Choose the bundle with the GT8HW-IH transducer, featuring high-wide CHIRP traditional sonar, if you have a boat with a fiberglass hull and a deadrise of 0° to 6°