SportAbout Compass w/Tie-Down Holder Ritchie SportAbout X-11Y compass included with X-TD Tie-down mounting. No Drilling, No Holes in Deck Flexible Pad and Foam Ring Easily Conforms to Deck Shape Won't Scratch Finishes Attaches with Bungee Cord and Clips (included)

SportAbout Hand Bearing Compass  Features: Easy to Read 2″ (51 mm) Direct-Reading Dial Hardened Steel Pivot and Sapphire Jewel Movement Built-in Roller Diaphragm for Extended Temperature Operating Range International Safety Yellow Case Silicon Impact Resistant Case with Neck Lanyard Compact Size for Easy Handling and Storage QuickSight V-Notch and Lubber Line for Easy Heading Alignment Non-Electric Chem Sticks Provide 18 Hours of Night Lighting Holder Available in Black or White. Ideal for Deck Mounting SportAbout Compasses on Small Boats

Kayaker Tie Down Designed for Mounting the Ritchie Kayaker XP-99 (compass not supplied) Features: No Drilling, No Holes in Deck Flexible Pad and Foam Ring Easily Conforms to Deck Shape Won't Scratch Finishes Attaches with Bungee Cord and Clips (included)

YB-600 Globemaster Steel Boat Compass with 5° Card - 12V - Yoke Mounted - Black  Features: Large, Easy to Read 6″ (152 mm) Open Face Dial Choice of 2 degree with points or 5 degree. Easily Installed Hardened Steel Pivot and Sapphire Jewel Movement 90 Degree Lubber Lines for Easy Reading Built-in Semi-Circular Compensators 4 inch quadrantal correctors are standard. Larger correctors are available. Choice of Green or Red lighting in 12, 24, or 32 Volts 100% Repairable Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 27 lbs. (8.16 kg) * Available upon request with the following specifications: 2 degree card with points / 2 degree card without points Red lighting 24 or 32 volt versions

RAM® X-Grip® Large Phone Mount with RAM® Stubby™ Cup Holder Base Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip® has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. This mount comes with the RAM Stubby™ cup holder mount. The durable composite shell construction and flexible support fins can be trimmed to size make this cup holder base a portable and versatile solution. The RAM ball and socket system allows for articulation at both ends of the double socket arm creating almost infinite adjustment and perfect viewing angles. Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5". The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.  Specifications: Purchase Includes: (QTY. 1) Optional Tether Included Cradle Dimensions: Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" Material: High Strength Composite & Stainless Steel Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 1.55 lbs.

PWC Rubber Ratchet Gunwale Tie-Down - 1" x 10' A 10' rubber ratchet gunwale tie-down features D rings and J hooks for tubular trailers.

Quick Release Trailer Tie-Down - 1" x 2' - Pair This 1" x 2' small over-center quick release tie-down buckle is strong and durable that features an over-locking buckle, polypropylene belt and protective pad with hook and loop closures. Ideal for smaller lightweight boats. It features American made heavy vinyl coated top hook and zinc plated bottom hook.  

Quick Release Trailer Tie-Down - 1" x 4' - Pair This 1" x 4' small over-center quick release tie-down buckle is strong and durable that features an over-locking buckle, polypropylene belt and protective pad with hook and loop closures. Ideal for smaller lightweight boats. It features American made heavy vinyl coated top hook and zinc plated bottom hook.  

Kayaker Compass Features: Course Minder Movable Bezel with Heading Memory Indicator Remembers the Way 2 3/4″ (70 mm) Direct-Reading Dial Low Mounted Height Surface Mount Easily Installed  Extended Temperature Operating Range with Composite Construction & Diaphragm Exclusive DirectiveForce Magnets Hardened Steel Pivot and Sapphire Jewel Movement No Wiring or Power Needed Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 1 lb. (454g) Notes: Kayaker Tie Down mount available. Part number K-TD.2

Kayaker Compass Features: Course Minder Movable Bezel with Heading Memory Indicator Remembers the Way 2 3/4″ (70 mm) Direct-Reading Dial Low Mounted Height Surface Mount Easily Installed  Extended Temperature Operating Range with Composite Construction & Diaphragm Exclusive DirectiveForce Magnets Hardened Steel Pivot and Sapphire Jewel Movement No Wiring or Power Needed Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 1 lb. (454g) Notes: Kayaker Tie Down mount available. Part number K-TD.2

X-Port Tactician™ Compass Features: Course Minder Movable Bezel with Heading Memory Indicator Remembers the Way 3″ (76 mm) CombiDial with Tactical Quadrants to show Wind Shifts and Headers. Low Mounted Height Surface Mount Easily Installed Extended Temperature Operating Range with Composite Construction & Diaphragm Exclusive DirectiveForce Magnets Hardened Steel Pivot and Sapphire Jewel Movement No Wiring or Power Needed Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 1 lb. (454g) Notes: Kayaker Tie Down mount available. Part number K-TD.2

RAM® Vertical Track Tie Down – 2 Pack As a pack of two, the RAM® Vertical Track Tie Down system features a T-Bolt and provides an anchor point for use with a track mounting system, allowing you to secure coolers and other accessories to your kayak. Each tie down is designed to work with 1” and 1.5” flat webbing, as well as ropes and bungee cords up to 3/8”. Compatible with all versions of the RAM Tough-Track™.  Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. 

RAM® Tough-Ball™ for Bronco Hood Tie-Down The RAM® Tough-Ball™ for Bronco Hood Tie Down (RAP-B-379U-252062-2SLW) is a 1" diameter rubber ball connected to a 1/4"-20 x.625" male threaded post, ideal for installing RAM® Mounts on the Bronco Hood Tie Down. The included split lock washers ensure a secure connection in rugged environments when the RAM® Tough-Ball™ is used as an anchor point for a mounting system. This base replaces the OEM exposed bolts on the hood tie-down found on all Ford Bronco models, including the base model, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage, and Raptor. Features: Includes RAM® Tough-Ball™ with 1/4"-20 x .625" threaded stud and two split lock washers Compatible with B size RAM® double socket arms, ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum and stainless steel components for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (2) Split Lock Washers Thread Pitch: 1/4"-20 x .625" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs; Heavy-Duty Use: 1 lb Materials: High-strength composite, stainless steel threads Packaging Type: Polybag Weight: 0.11 lbs

RAM® Tough-Ball™ for Bronco Hood Tie-Down with Action Camera Adapter The RAM® Tough-Ball™ for Bronco Hood Tie Down with Action Camera Adapter (RAP-B-379-252062-2SLW-A-GOP1U) is an action camera mounting solution that installs on the Bronco Hood Tie Down. This kit includes a medium-length double socket arm, a 1" diameter ball with a custom GoPro® Hero adapter, and a 1" diameter rubber ball connected to a 1/4"-20 x.625" male threaded post. The included split lock washers ensure a secure connection in rugged environments when the RAM® Tough-Ball™ is used as an anchor point for a mounting system. This base replaces the OEM exposed bolts on the hood tie-down found on all Ford Bronco models, including the base model, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage, and Raptor. Features: Action camera adapter includes a 1" B-size RAM® rubber ball and is compatible with GoPro® and most other brands; attaches to the underside of cameras Includes RAM® Tough-Ball™ with 1/4"-20 x .625" threaded stud and two split lock washers Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (2) split lock washers Socket to Socket Length: 1.75" Thread Pitch: 1/4"-20 x .625" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: High-strength composite, stainless steel threads Packaging Type: Polybag Weight: 0.31 lbs Compatible Devices: GoPro: Hero, Session Garmin: Virb SJCAM: SJ4000, SJ5000X Elite 4K Muvi: veho K-Series K-2 Pro 4K Xcel: 1080C Vivitar: HD ACTIVEON: CX Gold Discovery: Kids Photo & Video Adventure Camera AEE: ACE S70 Black 16MP 2" AKASO: EK7000 4K WIFI Sports AEDILYS: 4K WIFI Sports Lightdow: LD4000 1080P HD WiMiUS: Q2 Black 1080P Wifi Vtin: 4k, WiFi

BoatBuckle® G2 Retractable Bow Tie-Down Quantity: 1 Dimensions: 2"-43" Break Strength: 2,500 lbs. Safe Work Load: 833 lbs Introducing another industry first... the BoatBuckle® G2 Bow Tie-Down, the only automatically retractable ratcheting tie-down in its category! This system was designed with three-point trailer tie-down safety in mind and should always be used in conjunction with a good winch strap,along with a transom or gunwale tie-down.