Your unit snaps securely into this handlebar mount, which fits up to a one-inch diameter bar. Includes mounting hardware and instructions. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Handlebar Mount Bracket Snap your GPS unit into this secure handlebar mount and its ready to ride! Mount fits up to a one-inch diameter bar and is perfect for your bike, motorcycle, or ATV. Includes: Hardware Instructions Compatible Devices: eTrex® Series WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Snap your GPS Unit into this secure handlebar mount and it's ready to ride! Mount fits up to a one-inch diameter bar and is perfect for your bike, motorcycle or ATV. Includes hardware and instructions. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Handlebar Mount Kit Mount your compatible motorcycle device just about anywhere with our mounting kit (mounting bracket sold separately).

Handlebar Mount for Montana® Series Take your Montana® anywhere and everywhere with this handlebar mount. Simply snap your device - in any orientation, portrait or landscape - into the 22 to 32mm rugged mount, which attaches to any standard bicycle handlebar, and it's ready for your next cycling tour or mountain biking adventure. A molded rubber cushion is included in the kit to increase the mount's grip on the handlebar and also to prevent rotation during possible vibration. Kit also includes hardware and instructions. Compatible Devices: Montana®; 600 Montana® 650 Montana® 650t WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Handlebar Mount for Edge® 205, 305, 605 & 705 Secure your Edge® to the handlebar of your bike with this bike mount. Zip ties included. Compatible Devices: Edge® 205, 305, 605 & 705 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Motorcycle Mount Bracket Mount your zÅ«mo® to your motorcycle with this bracket that attaches to the bike's handlebars using a separate mounting kit (sold separately). Hardware to attach the bracket to your compatible zÅ«mo is included.

Motorcycle Mount Bracket Mount your zūmo® 350LM to your motorcycle with this bracket that attaches to the bike's handlebars using a RAM mount (sold separately). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Transom Mount Bracket Easily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent sonar returns at all speeds.

Transom Mount Bracket f/Livescope Plus LVS34 Easily attach your compatible LiveScope™ transducer to the transom of your boat with this stainless steel mount.

Swivel Mounting Bracket Mount your chartplotter or sounder with Garmin's swivel mounting bracket. Compatible Devices: GPSMAP® 500 Series GXM™ 31 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quick-Grip™ 15W Waterproof Wireless Charging Handlebar Mount The RAM® Quick-Grip™ Wireless is a patented, universal, waterproof wireless charging cradle for phones. As part of the spring-loaded RAM® Quick-Grip™ family, this cradle allows for single-handed placement and removal of your phone while taking advantage of Qi wireless phone charging. Both the top and bottom cups feature rubber to help hold a phone firmly in place. To insert your device, use your phone to push the top cup upward, and then gently place your device against the cradle for a secure fit. This Qi-compatible wireless charging cradle ensures your compatible phone charges as long as it’s within the listed compatible dimensions. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. This RAM® Quick-Grip™ Wireless handlebar kit includes a B-size diamond base featuring a 1" rubber ball, a short double socket arm, and a zinc-coated U-bolt base. U-bolt hardware accommodates rails from .5" to 1.25" in diameter. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwired charger.  Features: The waterproof Qi-compatible wireless phone charging cradle features a spring-loaded RAM® Quick-Grip™ design and 15W maximum output Kit includes a wireless charging cradle, B-size diamond ball base, short double socket arm, U-bolt handlebar base, and hardwire charger Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments RAM® Mounts are backed by a lifetime warranty and RAM® electronics are backed by a 1-year warranty with proof of purchase required Specifications: Hardware Included: (1) Safety Tether, (1) Silicon sleeve for USB waterproof connection, (1) Hardwire Charger with Cable, (4) Small zip ties, (4) Large zip ties, (1) 1/4"-20 U-Bolt for .5" - 1" Rails, (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails, (2) 1/4"-20 Nylock Nuts, (2) Rubber Caps, and (1) U-Bolt Spacer Holder Dimensions (inch): Height Range: 5.625" - 6.625", Max Width: 3.125", Max Depth: .7" Clamp Range (inch): .5" - 1.25" diameter Socket-to-Socket Length (inch): 1.75" Ball Size (inch): B Size (1") Weight Capacity: Standard Use: 2 lbs / Heavy-Duty Use: 1 lbs Materials: Marine-grade aluminum, high-strength composite, and stainless steel Weight: 1.87 lb. Power Specifications: Input Power: 5V-2A; 9V-1.67A Output: 15W Conversion Efficiency: 85% Max Maximum Case Thickness: 6mm Working Frequency: 110-205KHZ Product Standard: WPC v.1.2.4 Qi Compatible: Yes Compatible with QC2.0/QC3.0 power supplies Input Connector: USB Type-A Male Input Cable Length: 20" with optional 1.2M extension cable Operating Temperature: 0°C to +37.7°C Compliance: Over Voltage Protection, Short Circuit Protection, Reverse Polarity Protection, RoHS Compliance, WEEE Compliance, SAE J-1113-5 Load Dump (Transient Voltage), and Moisture Resistant Certifications: CE Certification, KC, e-Mark Certification, RCM Certification, and FCC Certification  Warranty: 1 year  Compatible Devices: Apple: iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 8, iPhone 8 Plus, iPhone SE, iPhone X, iPhone Xr, iPhone Xs, and iPhone Xs Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Google: Pixel 3, Pixel 3 XL, Pixel 4, Pixel 4 XL, Pixel 5, Pixel 6, Pixel 6 Pro, Pixel 7, and Pixel 7 Pro Huawei: Mate 20 Pro and P30 Pro LG: G6, G6+, G7 ThinQ, G8 ThinQ, G8S ThinQ, V30, V35 ThinQ, V40 ThinQ, and V50 ThinQ Nokia: 8 Sirocco and 9 PureView Razer: Phone 2 Samsung: Galaxy Note 10, Galaxy Note 10 Plus, Galaxy Note 5, Galaxy Note 8, Galaxy Note 9, Galaxy S10, Galaxy S10 5G, Galaxy S10+, Galaxy S10e, Galaxy S20, Galaxy S20+, Galaxy S20 Ultra 5G, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 5G, Galaxy S22+ 5G, Galaxy S22 Ultra 5G, Galaxy S23, Galaxy S23+, Galaxy S23 Ultra, Galaxy S6, Galaxy S6 Edge, Galaxy S6 Edge+, Galaxy S7, Galaxy S7 Active, Galaxy S7 Edge, Galaxy S8, Galaxy S8+, Galaxy S8 Active, Galaxy S9, and Galaxy S9+ Sony: Xperia XZ2, Xperia XZ2 Compact, and Xperia XZ3  Xiaomi: Mi 9, Mi 9 Explorer, Mi Mix 2S, and Mi Mix 3 ZTE: Axon 9 Pro, Axon 10 Pro

Bicycle Handlebar Mount Simply snap your compatible device — in portrait or landscape mode* — into the 22 mm or 32 mm rugged mount and take it anywhere. Included mounts and hardware attach to any standard bicycle handlebar. *To achieve optimal performance, portrait mode is recommended for Montana® 700i and Montana 750i devices.

RAM® Quick-Grip™ Handlebar Mount for Apple MagSafe Compatible Phones The RAM® Quick-Grip™ product line gets an Apple MagSafe Charger compatible insert. Designed specifically to fit the official Apple MagSafe Charger, this RAM® Quick-Grip™ phone holder has a removable backing plate so you can install your Apple MagSafe Charger directly into the holder with the ability to adjust the positioning of the charging disk depending on your iPhone 12 model iPhone. This insert allows a perfect and secure fit for the MagSafe's charging disk and is only compatible with the iPhone 12, 12 Pro, 12 Pro Max, and 12 mini with or without an official Apple MagSafe case. Included in this kit is the RAM® Handlebar U-Bolt base with B size short-length socket arm, perfect for handlebar mounting on your motorcycle, UTV, or e-bike. The U-Bolt base accommodates rails from 0.5" to 1.25" in diameter and includes a spacer for a tight fit without scratching the handlebar. Take advantage of your iPhone 12's magnetic MagSafe charging abilities with this MagSafe mount.  Features: Kit includes RAM® Quick-Grip™ Holder for Apple MagSafe Charger, B size diamond ball base, short double socket arm, and RAM® U-Bolt base; MagSafe Charger not included Compatible with iPhone 12 and 13 series, Pro and Pro Max, with or without Apple MagSafe phone cases; not compatible with standard phone cases RAM® Quick-Grip™ Holder has a removable backing plate to adjust the positioning of the MagSafe Charger U-bolt base includes bar spacer and accommodates rails from .5" to 1.25" in diameter Backed by a lifetime warranty Hardware Included: Assembly Hardware (1) Safety Tether (1) 1/4"-20 U-Bolt for .5" - 1" Rails (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails (2) 1/4"-20 Nylock Nuts (2) Rubber Caps (1) U-Bolt Spacer Specifications: CLAMP RANGE: .5" - 1.25" diameter SOCKET-TO-SOCKET LENGTH: 1.75" BALL/SOCKET SIZE: B Size (1") WEIGHT CAPACITY: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb MATERIALS: Marine-grade aluminum, High strength composite WEIGHT: 0.85 lbs. ADDITIONAL INFORMATION: For iPhone 12 mini and 13 mini, a case is required and the use of included tether is required. Exposure to vibrations, like those generated by high-powered motorcycle engines, might impact iPhone cameras.

ProMount Quick Release Mounting Bracket For years anglers have been demanding a strong, low profile, quick release bracket for holding their fishing electronics. Designed to handle today's most popular sonar units, GPS or portable radios. The ProMount Quick Release Bracket makes it possible to easily remove your electronics weighing up to three pounds from a permanently mounted base with one hand. The 360-degree swivel adjustment lets you see the unit from any angle. The Pro Mount will fit nearly all Lowrance, Garmin, Eagle, Hummingbird, Pin-Point and Vexilar electronics. The permanent base is available separately too, which makes it easy to place several bases around the boat or even in another boat. Several systems have been mounted in trucks to hold GPS units with great success.  The ProMount sells for much less than current brackets, but with more features and versatility. The sleek, low profile of the ProMount is only 1 1/8 inches high. The permanent base has no sharp edges to step-on or wear a hole in your boat cover. An optional installation hole cover spacer comes with every base to give you a well finished look to the mount when installed. Your electronics can also be mounted overhead and hang down on the secure locking rail system of the ProMount to increase the potential places you can mount electronics. The ProMount Quick Release Bracket comes with all stainless steel mounting hardware and the bracket is corrosion resistant. The ProMount is self-draining and easy to clean, so it even looks good when the electronics are not in your boat. Features: 360-degree swivel adjustment Sleek, low profile of the ProMount is only 1 1/8 inches high Fits nearly all Lowrance, Garmin, Eagle, Hummingbird, and Vexilar electronics Made of tough ABS plastic Stainless steel mounting screws One year warranty Made in the USA Specifications: Outside Dimensions: 3.45" x 4.75" Mounting Hole Spacing: 2.3" x 3.7" Mounting Hole Size: 1/4" Supports weights up to 3 pounds One year warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.