|
JMP Marine JSK0080 Cummins Engine Cooling Seawater Pump Major Service Kit
Replaces Cummins 4930629, John Deere DZ108626, Sherwood 25045.
Services Pumps: JPR-C1100, Cummins 3349392, 4929178, 5260393, JPR-JD60IF2, John Deere DZ108620, Sherwood G2910X
JSK0080 JMP Marine Cummins Engine Cooling Raw Water / Seawater Pump Major Service Kit
Replacement and Equivalent to:
Cummins Kit 4930629
John Deere Kit DZ108626
Sherwood Kit 25045
Please Note:
JSK0080 includes all internal parts for full entire rebuild of pump vs Cummins kit 5260396 which has less parts. You get ALL PARTS with JMP Marine kits! Parts are fully compatible to genuine and can be used to service both JMP Marine pumps JPR-C1100, JPR-JD60IF2 along with Genuine OEM pumps!
Kit Includes All Internal Parts for full rebuild:
8359-01 (FLEXIBLE IMPELLER) - QTY:1
CAMSET0032 (CAM SET) - QTY:1
MCSSET0019 (MECHANICAL SEAL SET) - QTY:1
SHA0093 (SHAFT) - QTY:1
ORG0055 (O-RING) - QTY:1
ORG0054 (O-RING) - QTY:1
RET0042 (OIL SEAL) - QTY:1
COV0041 (BEARING COVER) - QTY:1
BER0052 (BEARING) - QTY:2
WER0020 (WEAR PLATE) - QTY:1
COV0038 (END COVER) - QTY:1
SNP0013 (SNAP RING) - QTY:1
BOL0036 (SPRING WASHER) - QTY:5
BOL0007 (END COVER BOLT) - QTY:5
Services JMP Marine & OEM Genuine Engine Cooling Raw Water / Seawater Pumps:
JPR-C1100 Cummins Replacement Pump
JPR-JD60IF2 John Deere Replacement Pump
|
961.73 |
|
|
JMP Marine Engine Cooling Raw Water Pump JPR-JD25UH
Product Information & Specs:
Uses JMP Flexible Impeller p/n: 7400-01K
Port Type: 1" Pipe
Pump Weight (approx): 6.25 LBS (3.85 KG)
Shaft Type: Spline Drive (9 Splines)
Heavy Duty Marine Grade Casting
Marine Grade Shaft (3X Series Non-Magnetic)
Screw with Hex Head / Driver
O-Ring End Cover Packing
High Performance Impeller
High Flow Capacity
Fast Flow Velocity
Forged Cam
This JMP Pump Replaces the following pumps
Replaces Genuine John Deere Pump p/n(s): RE535944, RE503068, RE525563
Replaces Johnson Pump p/n(s): 10-24753-01, 10-24907-01 (F7B-9)
Replaces Onan Pump p/n: 132-0435
For John Deere Engine Model(s): 4045DFM50, 4045DFM70, 4045TFM50, 4045TFM75, 4045TFM85, 6068SFM50,6068TFM50, 6068TFM75, 6068TFM76
Fits Kohler Engine Model(s): 40E02/33EF02, 65E02/55EF02, 30E02/20EF02, 99E02/80LF02
Internally Parts are Compatible to Genuine: NO Changes have been made to End Cover, O-Ring for Cover,Cover Screw, Cam, Wear Plate, Oil Seal, Mechanical Seal, Shaft for Better Quality & Performance
Major Service Kit (All Internal Parts): JSK0076 (Sold Separately)
Minor Service Kit: JSM0024 (Sold Separately)
|
518.99 |
|
|
JMP Marine Crank Mounted Engine Cooling Seawater Pump JPR-CP25UH
Product Information & Specs:
Uses JMP Impeller p/n: 7136-01K
Pump Weight (approx): 4.85 LBS (2.20 KG)
Pump Type: Crank Mounted Raw Water Pump
Port Size (mm/inches): 32mm / 1.25"
Pump Size (mm/inches): Length (124mm/4.88"), Width (114mm/4.49"), Height (117mm/4.61")
Plug & Play Replacement
Heavy Duty Marine Grade Casting
Marine Grade Shaft (3X Series Non-Magnetic)
High Performance Flexible Impeller
Crank Mounted
Replaces these Volvo Penta pumps: 3860703, 841640, 856513, 857451
Replaces this Jabsco pump: 50410-1201
Replaces these Johnson pumps: F6B-9, 10-24232-1, 10-24930-01, 10-24805-01, 10-24076-2, 10-24228-1, 10-24915-1
Replaces this Sherwood pump: P105
Replaces this Alaska Diesel pump: L6414A
Replaces these Indmar pumps: 685001, 685001-1, 685001-3, S685001
Replaces this Marine Power pump: 524520Z
Replaces this Northern Lights pump: 25-11030
Replaces this Sierra pump: 18-3587
Replaces these: Crusader, PCM, Pleasurecraft, Seamaxx RA057023, RA057024, RA057026 pumps
Used on Engine Models Alaska Diesel, Crusader, Indmar, Jabsco, Johnson, Marine Power, Northern Lights, PCM, Pleasurecraft Marine, Sherwood, Sierra, Seamaxx, Volvo Penta
|
277.12 |
|
|
JMP Marine Caterpillar C18 Engine Cooling Seawater Pump Minor Service Kit
Replaces Caterpillar Kit 2845562. Services Pump(s) JPR-CT1800R, Caterpillar 3754703, Sherwood G2902X, G2902-01, G2906X
|
532.24 |
|
|
Jabsco 17360-1001 Engine Cooling Pump
For Detroit Diesel, V-71-92, 23507475, 23507476, 23507477, 23507973
Caterpillar, D-336, D-343, D-353, 3N1888
Some Stewart & Stevenson Marinizations of Detroit Diesel Engines.
Pump Body: Bronze
Port Size: 2-1/2" Flange Type
Impeller: Neoprene use Jabsco 17370-0001-P Impeller
Cam: Wear Resistant Polyurethane Cam/Liner
Shaft Seal: Mechanical Face Seal
Shaft: 316 Stainless Steel
Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
Easy to service and maintain.
Bronze flexible impeller engine cooling pump
Flow rate: Nominal 270 Litres/min (60 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Minor plumbing modifications may be required for certain applications.
Jabsco Engine Cooling Pump, 6 cover screws with double flat Impeller drive
|
3112.95 |
|
|
Jabsco 17540-0201 Engine Cooling Pump
Jabsco 17540-0201 is a Detroit Diesel marine engine cooling pump
Impeller: Neoprene
Shaft Seal: Carbon/Ceramic Mechanical Seal
Port Size: 3 Inch
This is the Marine Engine Cooling Pump for Detroit Diesel Series 60 Engines, Detroit Diesel pumps 23525200, 23522735, 23535447.
|
3971.18 |
|
|
Sherwood P1016 Engine Cooling Pump
The Sherwood P1016 flexible impeller engine cooling pump replaces the Sherwood pump P1016-01
Applications for the Sherwood P1016 pump include: Cummins QSD 2.0 & 2.8 engines, replaces Cummins 854179001, Mercury MerCruiser 879312023 and 854179001 pumps.
This is a genuine Sherwood P1016 flange mounted boat engine cooling pump, using raw water intake (river water or sea water) to cool the engine. The Sherwood P1016 is supplied complete with a 12 vane through key drive flexible neoprene impeller.
The raw water engine cooling pump is the heart of the marine engine, supplying a continuous flow of raw water to maintain temperatures consistent with the demanding engine performance. Over the years, Sherwood raw water pumps have developed a reputation of excellence in quality; and today are chosen for their performance and dependability by the most prestigious marine engine manufacturers.
Sherwood pumps are one of the largest suppliers of flexible rubber impeller cooling pumps for marine engines in the USA. They can be found fitted on some of the most well known engine brands in both pleasure and commercial boats.
To ensure that your boat engine cooling pump performs as required, regular preventative maintenance and inspection should be carried out. The Sherwood engine cooling pump impeller should be replaced every 3 - 12 months depending on application.
|
452.05 |
|
|
Jabsco 1673-1003 Pump 1/2" Ped Mt
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT
Impeller: Nitrile
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene or Nitrile (Oil Resistant)
Shaft Seal: Lip Seal or Mechanical seal, Buna N
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Lip Seal Nitrile Impeller
|
447.01 |
|
|
Jabsco 1673-2001 Pump 1/2" Npt Neo W/Mech Sl
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene
Shaft Seal: Mechanical seal
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of a flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Mechanical Seal Neoprene Impeller
|
543.35 |
|
|
Engine Cooling Pump for Kohler 4-6 Cylinder Diesel - 4-6.5kW Gas - 12.5 kW Gas
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
4-6 Cylinder Diesel
4-6.5 kW Gas
12.5 kW Gas
Replaces Pump:
Kohler - 267373, 246489, 344089 (Impeller Kohler 229826)
Sherwood - G907P (Impeller Sherwood 9959K)
|
241.37 |
|
|
Engine Cooling Pump for Kohler
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
N/A
Replaces Pump:
Kohler - GM46936, GM344371 (Impeller Kohler 229826)
Sherwood - G910P (Impeller Sherwood 9959K)
|
241.37 |
|
|
Engine Cooling Pump for Kohler - 5-7 Diesel kW
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
Kohler 5-7 KW Diesel
Replaces Pump:
Kohler - 28487 359341 GM28487 (Impeller Kohler 359978)
Sherwood - G8001 (Impeller Sherwood 8000K)
|
196.96 |
|
|
Engine Cooling Pump for Kohler - 5EKD, 4EFKD, 7.5EKD, 6EFKD, 10EKD, & 8EFKD
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
5EKD, 4EFKD, 7.5EKD, 6EFKD, 10EKD, and 8EFKD
Replaces Pump:
Kohler - GM63535 (Impeller Kohler 359978)
Sherwood - G8005 (Impeller Sherwood 8000K)
|
209.82 |
|
|
Crank Shaft Engine Cooling Pump
This crank shaft engine cooling pump is interchangeable with F6B-9, Johnson Pump 10-24930-01 replaces Johnson 10-24915-01, Johnson 10-24805-01, Johnson 10-24232-01, and Indmar 685001, which converts pulley-driven to crank shaft-driven mounts for Ford or GM V6/V8 marine engine blocks. Other applicable engine blocks include PCM, Crusader, Mercruiser, and more.
|
202.30 |
|
|
Johnson 10-13095-02 Engine Cooling Pump
Detroit Diesel 671Ti, 871, 1271
FEATURES
Pump Body:
Bronze
Ports:
Flanged
Cam:
Full
Impeller:
Neoprene
Shaft Seal:
Mechanical
Drive:
Flange Mounted to Engine.
APPLICATIONS / CHARACTERISTICS
Flexible Impeller Engine Cooling Pump.
Johnson- Engine Cooling Pump Detroit Diesel 671TI, 871, 1271 Less Flange
F9B-9, Detroit Diesel 671TI 871 1271
|
1604.18 |
|