Zeus³S GH 16" Display Only B & G Zeus³S GH 16" Display Only: The B & G Zeus³S Glass Helm 16 is designed specifically for blue water sailing, multihulls and superyachts. This premium, super-fast, large-screen, multifunction display sits at the heart of your fully integrated navigation system. The Zeus³ Glass Helm provides easy-to-use touchscreen and remote control options. B & G’s unique sailing features including SailSteer and RacePanel all combine with Radar, charting, sonar and much more. View data easily on the all-weather screen The B & G Zeus³S Glass Helm has an ultra-bright, wide-angle, full HD display combined with all-weather touchscreen. Whether it’s planning a route, checking for obstacles and weather on the Radar screen, or simply navigating to your next destination; the Zeus³S Glass Helm’s impressive screen enables the user to view the data easily through polaroid lenses, from almost any angle, even in bright sunlight. This low profile, glass design provides a smart solution for any large sailing yacht. Powerful & intuitive all-in-one unit B & G Zeus³S Glass Helm is a premium, large screen multi-function display with powerful quad-core processor and intuitive touchscreen that makes it easy-to-use. The built-in processor also means no separate “black box” is required, simplifying system integration and expansion. The familiar pinch-to-zoom and swipe-to-pan actions to control the many features, make life on the water easier and safer. Dedicated sailing features for cruising and racing With B & G’s award-winning sailing functions, you can see all of your key sailing data together on one screen, or overlaid on charts for the modern sailor’s ultimate navigation view. Taking accurate data from the B & G instruments and sensors on the network, B & G SailSteer will provide an intuitive graphic display of your Boat Speed, Wind, Heading, Tide, Wind Shift Sectors and Laylines. It’s easy to add waypoints or plot a course; and with B & G SailingTime you’ll see waypoint arrival times based on a sailing course and tidal effects, rather than a straight-line calculation. Features: Easy viewing whatever the conditions, with large, low-profile, full glass display with best-in-class screen Ultra-bright, wide-angle Full HD Display Plan routes, add waypoints, or adjust course and settings using the easy-to-use touchscreen or Zeus Controller (required) Get more from your sailing with B & G’s dedicated sailing features for cruising or racing SailSteer SailingTime RacePanel Laylines Powerful integration with on board systems including Broadband Radar™, ForwardScan™, instruments, B & G autopilots, entertainment and digital switching systems Built-in, powerful processor (no black box required) Integrated Wi-Fi for easy access to charts and software updates Choose from the widest range of charts to suit your area including C-MAP and Navionics® Easy networking and integration with NMEA 2000®

Zeus³S Glass Helm 16" System Pack  Includes Zeus³S 16" Multi-function display, ZG100 GPS sensor,  MI10 card reader and ZC2 controller. The B & G Zeus³S Glass Helm 16 is designed specifically for blue water sailing, multi-hulls and super yachts. This premium, super-fast, large-screen, multi-function display sits at the heart of your fully integrated navigation system. The Zeus³S Glass Helm provides easy-to-use touchscreen and remote control options. B & G’s unique sailing features including SailSteer and RacePanel all combine with Radar, charting, sonar and much more. View data easily on the all-weather screen The B & G Zeus³S Glass Helm has an ultra-bright, wide-angle, full HD display combined with all-weather touchscreen. Whether it’s planning a route, checking for obstacles and weather on the Radar* screen, or simply navigating to your next destination; the Zeus³S Glass Helm’s impressive screen enables the user to view the data easily through polaroid lenses, from almost any angle, even in bright sunlight. This low profile, glass design provides a smart solution for any large sailing yacht. Powerful & intuitive all-in-one unit B & G Zeus³S Glass Helm is a premium, large screen multi-function display with powerful quad-core processor and intuitive touchscreen that makes it easy-to-use. The built-in processor also means no separate “black box” is required, simplifying system integration and expansion. The familiar pinch-to-zoom and swipe-to-pan actions to control the many features, make life on the water easier and safer. Dedicated sailing features for cruising and racing With B & G’s award-winning sailing functions, you can see all of your key sailing data together on one screen, or overlaid on charts for the modern sailor’s ultimate navigation view. Taking accurate data from the B & G instruments and sensors on the network, B & G SailSteer will provide an intuitive graphic display of your Boat Speed, Wind, Heading, Tide, Wind Shift Sectors and Laylines. It’s easy to add waypoints or plot a course; and with B & G SailingTime you’ll see waypoint arrival times based on a sailing course and tidal effects, rather than a straight-line calculation. Features: Easy viewing whatever the conditions, with large, low-profile, full glass display with best-in-class screen Ultra-bright, wide-angle Full HD Display Plan routes, add waypoints, or adjust course and settings using the easy-to-use touchscreen or Zeus Controller (required) Get more from your sailing with B & G’s dedicated sailing features for cruising or racing SailSteer SailingTime RacePanel Laylines Powerful integration with on board systems including Broadband Radar™, ForwardScan™,instruments, B & G autopilots, entertainment and digital switching systems Built-in, powerful processor (no black box required) Integrated Wi-Fi for easy access to charts and software updates Choose from the widest range of charts to suit your area including C-MAP and Navionics® Easy networking and integration with NMEA 2000®

Zeus³S 19" Glass Helm Display Only The B & G Zeus³S Glass Helm 19 is designed specifically for blue water sailing, multihulls and superyachts. This premium, super-fast, large-screen, multifunction display sits at the heart of your fully integrated navigation system. The Zeus³S Glass Helm provides easy-to-use touchscreen and remote control options. B & G’s unique sailing features including SailSteer and RacePanel all combine with Radar, charting, sonar and much more.  View data easily on the all-weather screen The B & G Zeus³S Glass Helm has an ultra-bright, wide-angle, full HD display combined with all-weather touchscreen. Whether it’s planning a route, checking for obstacles and weather on the Radar* screen, or simply navigating to your next destination; the Zeus³S Glass Helm’s impressive screen enables the user to view the data easily through polaroid lenses, from almost any angle, even in bright sunlight. This low profile, glass design provides a smart solution for any large sailing yacht. Powerful & intuitive all-in-one unit B & G Zeus³S Glass Helm is a premium, large screen multi-function display with powerful quad-core processor and intuitive touchscreen that makes it easy-to-use. The built-in processor also means no separate “black box” is required, simplifying system integration and expansion. The familiar pinch-to-zoom and swipe-to-pan actions to control the many features, make life on the water easier and safer. Dedicated sailing features for cruising and racing With B & G’s award-winning sailing functions, you can see all of your key sailing data together on one screen, or overlaid on charts for the modern sailor’s ultimate navigation view. Taking accurate data from the B & G instruments and sensors on the network, B & G SailSteer will provide an intuitive graphic display of your Boat Speed, Wind, Heading, Tide, Wind Shift Sectors and Laylines. It’s easy to add waypoints or plot a course; and with B & G SailingTime you’ll see waypoint arrival times based on a sailing course and tidal effects, rather than a straight-line calculation. Features: Easy viewing whatever the conditions, with large, low-profile, full glass display with best-in-class screen Ultra-bright, wide-angle Full HD Display Plan routes, add waypoints, or adjust course and settings using the easy-to-use touchscreen or Zeus Controller (required) Get more from your sailing with B & G’s dedicated sailing features for cruising or racing SailSteer SailingTime RacePanel Laylines Powerful integration with on board systems including Broadband Radar™, ForwardScan™,instruments, B & G autopilots, entertainment and digital switching systems Built-in, powerful processor (no black box required) Integrated Wi-Fi for easy access to charts and software updates Choose from the widest range of charts to suit your area including C-MAP and Navionics® Easy networking and integration with NMEA 2000®

Zeus³S 19" Glass Helm System Pack Includes Zeus³S 19" Multifunction display, ZG100 GPS sensor, MI10 card reader and ZC2 controller. The B & G Zeus³S Glass Helm 19 is designed specifically for blue water sailing, multihulls and superyachts. This premium, super-fast, large-screen, multifunction display sits at the heart of your fully integrated navigation system. The Zeus³S Glass Helm provides easy-to-use touchscreen and remote control options. B & G’s unique sailing features including SailSteer and RacePanel all combine with Radar, charting, sonar and much more.  View data easily on the all-weather screen The B & G Zeus³S Glass Helm has an ultra-bright, wide-angle, full HD display combined with all-weather touchscreen. Whether it’s planning a route, checking for obstacles and weather on the Radar* screen, or simply navigating to your next destination; the Zeus³S Glass Helm’s impressive screen enables the user to view the data easily through polaroid lenses, from almost any angle, even in bright sunlight. This low profile, glass design provides a smart solution for any large sailing yacht. Powerful & intuitive all-in-one unit B & G Zeus³S Glass Helm is a premium, large screen multi-function display with powerful quad-core processor and intuitive touchscreen that makes it easy-to-use. The built-in processor also means no separate “black box” is required, simplifying system integration and expansion. The familiar pinch-to-zoom and swipe-to-pan actions to control the many features, make life on the water easier and safer. Dedicated sailing features for cruising and racing With B & G’s award-winning sailing functions, you can see all of your key sailing data together on one screen, or overlaid on charts for the modern sailor’s ultimate navigation view. Taking accurate data from the B & G instruments and sensors on the network, B & G SailSteer will provide an intuitive graphic display of your Boat Speed, Wind, Heading, Tide, Wind Shift Sectors and Laylines. It’s easy to add waypoints or plot a course; and with B & G SailingTime you’ll see waypoint arrival times based on a sailing course and tidal effects, rather than a straight-line calculation. Features: Easy viewing whatever the conditions, with large, low-profile, full glass display with best-in-class screen Ultra-bright, wide-angle Full HD Display Plan routes, add waypoints, or adjust course and settings using the easy-to-use touchscreen or Zeus Controller (required) Get more from your sailing with B & G’s dedicated sailing features for cruising or racing SailSteer SailingTime RacePanel Laylines Powerful integration with on board systems including Broadband Radar™, ForwardScan™,instruments, B & G autopilots, entertainment and digital switching systems Built-in, powerful processor (no black box required) Integrated Wi-Fi for easy access to charts and software updates Choose from the widest range of charts to suit your area including C-MAP and Navionics® Easy networking and integration with NMEA 2000®

PowerPod Pre-Cut for Simrad NSO evo2 16″, NSO evo3 16″, NSO evo3S 16″, MO16-P, MO16-T, B & G Zeus² Glass Helm 16″, Zeus3 Glass Helm 16″, Zeus3S Glass Helm 16″ & ZM16-T PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base. PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability. NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets. All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods. PowerPods: Protection, Convenience, Security.

Zeus® S 9 Chartplotter/Fishfinder without Transducer The Zeus® S has been designed with the cruiser, racer, monohull, and multihull sailor in mind, providing a new intuitive user experience with user modes to easily get the best experience while sailing. The bright, sunlight viewable, touch screen combined with the new C MAP® Reveal X cartography enables new features and each sailing feature has been reimagined to be more capable and more intuitive. All are powered by the latest quad-core microprocessors that allow Instrument, Radar, Sonar and Charting features to all work seamlessly  Features: 12V power supply - 4 pins with yellow ignition Latest industrial-spec Quad-core microprocessors NMEA2000 compliant interface (Micro-C) Ethernet, 100mbps, waterproof Dual Wi-Fi (802.11g) for Over The Air software upgrades and B & G App support Waterproof Micro SD card slot IP67 Environmental rating USB Port Zeus s 9 and 12 only Sonar- CHIRP/Single Frequency, StructureScan, ActiveImaging, and Totalscan support Internal GPS with sail-specific filtering and 10Hz position updates. GLONASS, Galileo, Beidou, and QZSS constellation support for highly-accurate positioning worldwide 9" Ultra-bright IPS SolarMax HD display Touch screen for quick and simlple operation. Includes touch-lock feature Compatible with the latest CMAP® Discover TM X and Reveal TM X cartography providing up-to-date charting detail with a clean and modern look. Powerful Chart Overlays For: Radar High-Resolution Bathymetric contours (HRB) Shaded Relief* Satellite Imagery* Chart Features: Chart Safety Alerts Tides and Currents Night Mode Chart Inspector tool Subscription-free Auto-routing        *CMAP Reveal ™X only - Some features require additional system components (e.g. radar). Custom depth-shading Sailing Features: User Experience Simple Home screen with easy-to-find features Sailing modes - Cruise & Race, just the data you want Multihull & Monohull characterization Night mode optimized for low light conditions Configurable to suit your requirements Charting Clear CMAP Reveal X charts Safety Alerts Laylines with wind history Sailing Time to the Cursor position Chart orientations: Wind up; Target up; Start Line up Instruments Sailing dashboards Dashboard editor SailSteer™ gauge Tide Gauge Data Bar - prestart, upwind, reaching, downwind Triton® Edge integration Rotating mast support for wind and radar Racing Quick race entry Race Overview Race timer GPS start timer Start line tools Cruise Mode inhibits race features for a clean display of the right tools at the right time Chart Safety Alerts Sailing Laylines SailingTime & Distance to Cursor Subscription - free auto routing Tides & Currents Chart Inspector Race Mode enables additional features for racing = the right tools at the right time Start lIne Race Timer Quick Route Entry Race Overview Sailing Modes Easily switch between Cruise or Race sailing modes Race mode enables additional features: Quick race route entry Port / Starboard waypoint rounding indicators Race leg(s) overview  Start line chart overlay with: Set the start line Apply GPS offset for bow position Bias indicator tide and wind indicators Race Timer Countdown timer Start/Stop/Sync/Reset Countdown to GPS start time Safety Alerts The Safety Alerts feature included with Zeus S can constantly monitor your course for dangerous chart objects no matter what your speed, zoom level, or view. Whether it’s a buoy, shallow water, rocks, or land Zeus S can warn you in advance. CMAP® Discover  X and Reveal  X charts provide detailed chart data available at all times to Safety Alert Alerts provide the sailor with awareness of potentially dangerous charted objects above and below the waterline Automatically identify charted objects which are of concern, warning, or critical based on their relative time and distance ‘Harbor’ and ‘Offshore’ modes allow Zeus S to automatically change the time and range sensitivity based on the use  Ideal for use in unfamiliar waters or at night when visibility is reduced to identify dangerous objects. Quick Race Entry Quickly create a race route from the sorted list of waypoints Easily add port and starboard rounding indicators Intuitively add, remove or reorder a race route Use the Race overview tool to brief your race crew with expected wind angles and estimated sailing time for each race leg to aid decision-making and sail selection Start line The powerful Zeus Start Line tool is now chart based to allow navigational awareness during the start procedure Start line view, including laylines, favored end, tide set & rate, and True Wind Direction The chart dynamically orientates and zooms to ensure the boat and start line are in view Calculations are based on the yacht’s Bow Position via an offset distance for the GPS Zeus S Internal GPS (or optional external options) provides precise position 10 times per second Simple setup - set the port and starboard start line end positions via a button press (“ping”), waypoint, or cursor Easily return to view the start line on the chart via an edge marker Zeus S automatically captures your distance to the line when the race timer reaches zero The following start line data is calculated and displayed:  Distance behind the line (boat lengths or meters) Distance to port & starboard ends Start line Bias to True Wind Direction Bias advantage Race Timer Race Timer provides a flexible and integrated tool for starting and monitoring race duration Quickly adjust the race timer start value Set the race timer to countdown to a GPS-based start time. e.g. 1900h The race timer control is available from networked devices Start, Stop, Sync [to nearest minute] and Reset functions Automatically starts a stopwatch when the race timer reaches zero to track race duration Chart Orientation Easily rotate the chart to aid understanding and make better decisions for your route or race course. Single touch rotates between: North up Heading up Course up (Course over Ground) Target up (Waypoint) Wind up (True Wind Direction) Start line up Laylines B & G pioneered laylines in chart plotters with the original Zeus®. Zeus S laylines provide a powerful decision-aiding tool. Overlay your target sailing angles, upwind or downwind, to your destination on the chart Enable wind history to show a wind shift heat map, which intensifies the colors over time to show the history of true wind direction Mini Inspect (short press) a layline to gain detailed target sailing angles, speed, SailingTime, and distances Full Inspect provides detailed sailing information on current and opposite tacks Apply tidal correction to layline calculations Display laylines using actual data or input targets. Time to Cursor Have you ever wanted to know how long it will take to sail to a location on the chart or do you need to tell your race crew how long to go? Simply place the cursor anywhere on the chart to show an estimated sailing time and distance information to the cursor position. Ideal, when you’re navigating to a waypoint and you need to know the sailing time to a secondary position. Tide Gauge Need to know the state of the tide quickly? Zeus S provides at a glance tidal data Graphically see a tidal histogram including current time indication in the instrument data bar Choose between the automatic selection of the closest tidal station, or selecting a specific station More detailed tidal data is available via the chart icons Wind Plot Dedicated wind charts for monitoring wind history and assessing trends User configurable options include: Show Trend lines Show tack color (port/starboard) Show Average Min, Max, and current value Time range 1,5,10,30 or 60 minutes B & G Companion App Download the latest B & G App Plan & review your waypoints and routes using the latest C Map® Reveal X charts Seamlessly synchronize waypoints and routes between products Review your sailing data from Triton® Edge Register new products and access support information Complete product software updates Triton Edge Integration Adding a Triton® Edge Sailing processor to your system provides advanced wind, calibration, and data recording. Zeus S provides seamless integration with Triton Edge. Display all B & G NMEA2000® performance sailing data Seamlessly access the web interface on Triton ™Edge Control and system setup Perform advanced calibration Control data recording Connect via Ethernet or Wi-Fi What's In The Box? Zeus S display unit Panel mounting kit Sun Cover Corner clips Power Cable (2.0m) Fuse holder and fuse Installation guide and quick star documentation Mounting U bracket

Zeus® S 12 Chartplotter/Fishfinder without Transducer The Zeus® S has been designed with the cruiser, racer, monohull, and multihull sailor in mind, providing a new intuitive user experience with user modes to easily get the best experience while sailing. The bright, sunlight viewable, touch screen combined with the new C MAP® Reveal X cartography enables new features and each sailing feature has been reimagined to be more capable and more intuitive. All are powered by the latest quad-core microprocessors that allow Instrument, Radar, Sonar and Charting features to all work seamlessly  Features: 12V power supply - 4 pins with yellow ignition Latest industrial-spec Quad-core microprocessors NMEA2000 compliant interface (Micro-C) Ethernet, 100mbps, waterproof Dual Wi-Fi (802.11g) for Over The Air software upgrades and B & G App support Waterproof Micro SD card slot IP67 Environmental rating USB Port Zeus s 9 and 12 only Sonar- CHIRP/Single Frequency, StructureScan, ActiveImaging, and Totalscan support Internal GPS with sail-specific filtering and 10Hz position updates. GLONASS, Galileo, Beidou, and QZSS constellation support for highly-accurate positioning worldwide 12" Ultra-bright IPS SolarMax HD display Touch screen for quick and simlple operation. Includes touch-lock feature Compatible with the latest CMAP® Discover TM X and Reveal TM X cartography providing up-to-date charting detail with a clean and modern look. Powerful Chart Overlays For: Radar High-Resolution Bathymetric contours (HRB) Shaded Relief* Satellite Imagery* Chart Features: Chart Safety Alerts Tides and Currents Night Mode Chart Inspector tool Subscription-free Auto-routing        *CMAP Reveal ™X only - Some features require additional system components (e.g. radar). Custom depth-shading Sailing Features: User Experience Simple Home screen with easy-to-find features Sailing modes - Cruise & Race, just the data you want Multihull & Monohull characterization Night mode optimized for low light conditions Configurable to suit your requirements Charting Clear CMAP Reveal X charts Safety Alerts Laylines with wind history Sailing Time to the Cursor position Chart orientations: Wind up; Target up; Start Line up Instruments Sailing dashboards Dashboard editor SailSteer™ gauge Tide Gauge Data Bar - prestart, upwind, reaching, downwind Triton® Edge integration Rotating mast support for wind and radar Racing Quick race entry Race Overview Race timer GPS start timer Start line tools Cruise Mode inhibits race features for a clean display of the right tools at the right time Chart Safety Alerts Sailing Laylines SailingTime & Distance to Cursor Subscription - free auto routing Tides & Currents Chart Inspector Race Mode enables additional features for racing = the right tools at the right time Start lIne Race Timer Quick Route Entry Race Overview Sailing Modes Easily switch between Cruise or Race sailing modes Race mode enables additional features: Quick race route entry Port / Starboard waypoint rounding indicators Race leg(s) overview  Start line chart overlay with: Set the start line Apply GPS offset for bow position Bias indicator tide and wind indicators Race Timer Countdown timer Start/Stop/Sync/Reset Countdown to GPS start time Safety Alerts The Safety Alerts feature included with Zeus S can constantly monitor your course for dangerous chart objects no matter what your speed, zoom level, or view. Whether it’s a buoy, shallow water, rocks, or land Zeus S can warn you in advance. CMAP® Discover  X and Reveal  X charts provide detailed chart data available at all times to Safety Alert Alerts provide the sailor with awareness of potentially dangerous charted objects above and below the waterline Automatically identify charted objects which are of concern, warning, or critical based on their relative time and distance ‘Harbor’ and ‘Offshore’ modes allow Zeus S to automatically change the time and range sensitivity based on the use  Ideal for use in unfamiliar waters or at night when visibility is reduced to identify dangerous objects. Quick Race Entry Quickly create a race route from the sorted list of waypoints Easily add port and starboard rounding indicators Intuitively add, remove or reorder a race route Use the Race overview tool to brief your race crew with expected wind angles and estimated sailing time for each race leg to aid decision-making and sail selection Start line The powerful Zeus Start Line tool is now chart based to allow navigational awareness during the start procedure Start line view, including laylines, favored end, tide set & rate, and True Wind Direction The chart dynamically orientates and zooms to ensure the boat and start line are in view Calculations are based on the yacht’s Bow Position via an offset distance for the GPS Zeus S Internal GPS (or optional external options) provides precise position 10 times per second Simple setup - set the port and starboard start line end positions via a button press (“ping”), waypoint, or cursor Easily return to view the start line on the chart via an edge marker Zeus S automatically captures your distance to the line when the race timer reaches zero The following start line data is calculated and displayed:  Distance behind the line (boat lengths or meters) Distance to port & starboard ends Start line Bias to True Wind Direction Bias advantage Race Timer Race Timer provides a flexible and integrated tool for starting and monitoring race duration Quickly adjust the race timer start value Set the race timer to countdown to a GPS-based start time. e.g. 1900h The race timer control is available from networked devices Start, Stop, Sync [to nearest minute] and Reset functions Automatically starts a stopwatch when the race timer reaches zero to track race duration Chart Orientation Easily rotate the chart to aid understanding and make better decisions for your route or race course. Single touch rotates between: North up Heading up Course up (Course over Ground) Target up (Waypoint) Wind up (True Wind Direction) Start line up Laylines B & G pioneered laylines in chart plotters with the original Zeus®. Zeus S laylines provide a powerful decision-aiding tool. Overlay your target sailing angles, upwind or downwind, to your destination on the chart Enable wind history to show a wind shift heat map, which intensifies the colors over time to show the history of true wind direction Mini Inspect (short press) a layline to gain detailed target sailing angles, speed, SailingTime, and distances Full Inspect provides detailed sailing information on current and opposite tacks Apply tidal correction to layline calculations Display laylines using actual data or input targets. Time to Cursor Have you ever wanted to know how long it will take to sail to a location on the chart or do you need to tell your race crew how long to go? Simply place the cursor anywhere on the chart to show an estimated sailing time and distance information to the cursor position. Ideal, when you’re navigating to a waypoint and you need to know the sailing time to a secondary position. Tide Gauge Need to know the state of the tide quickly? Zeus S provides at a glance tidal data Graphically see a tidal histogram including current time indication in the instrument data bar Choose between the automatic selection of the closest tidal station, or selecting a specific station More detailed tidal data is available via the chart icons Wind Plot Dedicated wind charts for monitoring wind history and assessing trends User configurable options include: Show Trend lines Show tack color (port/starboard) Show Average Min, Max, and current value Time range 1,5,10,30 or 60 minutes B & G Companion App Download the latest B & G App Plan & review your waypoints and routes using the latest C Map® Reveal X charts Seamlessly synchronize waypoints and routes between products Review your sailing data from Triton® Edge Register new products and access support information Complete product software updates Triton Edge Integration Adding a Triton® Edge Sailing processor to your system provides advanced wind, calibration, and data recording. Zeus S provides seamless integration with Triton Edge. Display all B & G NMEA2000® performance sailing data Seamlessly access the web interface on Triton ™Edge Control and system setup Perform advanced calibration Control data recording Connect via Ethernet or Wi-Fi What's In The Box? Zeus S display unit Panel mounting kit Sun Cover Corner clips Power Cable (2.0m) Fuse holder and fuse Installation guide and quick star documentation Mounting U bracket

Zeus® S 7 Chartplotter/Fishfinder without Transducer The Zeus® S has been designed with the cruiser, racer, monohull, and multihull sailor in mind, providing a new intuitive user experience with user modes to easily get the best experience while sailing. The bright, sunlight viewable, touch screen combined with the new C MAP® Reveal X cartography enables new features and each sailing feature has been reimagined to be more capable and more intuitive. All are powered by the latest quad-core microprocessors that allow Instrument, Radar, Sonar and Charting features to all work seamlessly  Features: 12V power supply - 4 pins with yellow ignition Latest industrial-spec Quad-core microprocessors NMEA2000 compliant interface (Micro-C) Ethernet, 100mbps, waterproof Dual Wi-Fi (802.11g) for Over The Air software upgrades and B & G App support Waterproof Micro SD card slot IP67 Environmental rating Sonar- CHIRP/Single Frequency, StructureScan, ActiveImaging, and Totalscan support Internal GPS with sail-specific filtering and 10Hz position updates. GLONASS, Galileo, Beidou, and QZSS constellation support for highly-accurate positioning worldwide 7' Ultra-bright IPS SolarMax HD display Touch screen for quick and simlple operation. Includes touch-lock feature Compatible with the latest CMAP® Discover TM X and Reveal TM X cartography providing up-to-date charting detail with a clean and modern look. Powerful Chart Overlays For: Radar High-Resolution Bathymetric contours (HRB) Shaded Relief* Satellite Imagery* Chart Features: Chart Safety Alerts Tides and Currents Night Mode Chart Inspector tool Subscription-free Auto-routing        *CMAP Reveal ™X only - Some features require additional system components (e.g. radar). Custom depth-shading Sailing Features: User Experience Simple Home screen with easy-to-find features Sailing modes - Cruise & Race, just the data you want Multihull & Monohull characterization Night mode optimized for low light conditions Configurable to suit your requirements Charting Clear CMAP Reveal X charts Safety Alerts Laylines with wind history Sailing Time to the Cursor position Chart orientations: Wind up; Target up; Start Line up Instruments Sailing dashboards Dashboard editor SailSteer™ gauge Tide Gauge Data Bar - prestart, upwind, reaching, downwind Triton® Edge integration Rotating mast support for wind and radar Racing Quick race entry Race Overview Race timer GPS start timer Start line tools Cruise Mode inhibits race features for a clean display of the right tools at the right time Chart Safety Alerts Sailing Laylines SailingTime & Distance to Cursor Subscription - free auto routing Tides & Currents Chart Inspector Race Mode enables additional features for racing = the right tools at the right time Start lIne Race Timer Quick Route Entry Race Overview Sailing Modes Easily switch between Cruise or Race sailing modes Race mode enables additional features: Quick race route entry Port / Starboard waypoint rounding indicators Race leg(s) overview  Start line chart overlay with: Set the start line Apply GPS offset for bow position Bias indicator tide and wind indicators Race Timer Countdown timer Start/Stop/Sync/Reset Countdown to GPS start time Safety Alerts The Safety Alerts feature included with Zeus S can constantly monitor your course for dangerous chart objects no matter what your speed, zoom level, or view. Whether it’s a buoy, shallow water, rocks, or land Zeus S can warn you in advance. CMAP® Discover  X and Reveal  X charts provide detailed chart data available at all times to Safety Alert Alerts provide the sailor with awareness of potentially dangerous charted objects above and below the waterline Automatically identify charted objects which are of concern, warning, or critical based on their relative time and distance ‘Harbor’ and ‘Offshore’ modes allow Zeus S to automatically change the time and range sensitivity based on the use  Ideal for use in unfamiliar waters or at night when visibility is reduced to identify dangerous objects. Quick Race Entry Quickly create a race route from the sorted list of waypoints Easily add port and starboard rounding indicators Intuitively add, remove or reorder a race route Use the Race overview tool to brief your race crew with expected wind angles and estimated sailing time for each race leg to aid decision-making and sail selection Start line The powerful Zeus Start Line tool is now chart based to allow navigational awareness during the start procedure Start line view, including laylines, favored end, tide set & rate, and True Wind Direction The chart dynamically orientates and zooms to ensure the boat and start line are in view Calculations are based on the yacht’s Bow Position via an offset distance for the GPS Zeus S Internal GPS (or optional external options) provides precise position 10 times per second Simple setup - set the port and starboard start line end positions via a button press (“ping”), waypoint, or cursor Easily return to view the start line on the chart via an edge marker Zeus S automatically captures your distance to the line when the race timer reaches zero The following start line data is calculated and displayed:  Distance behind the line (boat lengths or meters) Distance to port & starboard ends Start line Bias to True Wind Direction Bias advantage Race Timer Race Timer provides a flexible and integrated tool for starting and monitoring race duration Quickly adjust the race timer start value Set the race timer to countdown to a GPS-based start time. e.g. 1900h The race timer control is available from networked devices Start, Stop, Sync [to nearest minute] and Reset functions Automatically starts a stopwatch when the race timer reaches zero to track race duration Chart Orientation Easily rotate the chart to aid understanding and make better decisions for your route or race course. Single touch rotates between: North up Heading up Course up (Course over Ground) Target up (Waypoint) Wind up (True Wind Direction) Start line up Laylines B & G pioneered laylines in chart plotters with the original Zeus®. Zeus S laylines provide a powerful decision-aiding tool. Overlay your target sailing angles, upwind or downwind, to your destination on the chart Enable wind history to show a wind shift heat map, which intensifies the colors over time to show the history of true wind direction Mini Inspect (short press) a layline to gain detailed target sailing angles, speed, SailingTime, and distances Full Inspect provides detailed sailing information on current and opposite tacks Apply tidal correction to layline calculations Display laylines using actual data or input targets. Time to Cursor Have you ever wanted to know how long it will take to sail to a location on the chart or do you need to tell your race crew how long to go? Simply place the cursor anywhere on the chart to show an estimated sailing time and distance information to the cursor position. Ideal, when you’re navigating to a waypoint and you need to know the sailing time to a secondary position. Tide Gauge Need to know the state of the tide quickly? Zeus S provides at a glance tidal data. Graphically see a tidal histogram including current time indication in the instrument data bar Choose between the automatic selection of the closest tidal station, or selecting a specific station More detailed tidal data is available via the chart icons Wind Plot Dedicated wind charts for monitoring wind history and assessing trends User configurable options include: Show Trend lines Show tack color (port/starboard) Show Average Min, Max, and current value Time range 1,5,10,30 or 60 minutes B & G Companion App Download the latest B & G App Plan & review your waypoints and routes using the latest C Map® Reveal X charts Seamlessly synchronize waypoints and routes between products Review your sailing data from Triton® Edge Register new products and access support information Complete product software updates Triton Edge Integration Adding a Triton® Edge Sailing processor to your system provides advanced wind, calibration, and data recording. Zeus S provides seamless integration with Triton Edge. Display all B & G NMEA2000® performance sailing data Seamlessly access the web interface on Triton ™Edge Control and system setup Perform advanced calibration Control data recording Connect via Ethernet or Wi-Fi What's In The Box? Zeus S display unit Panel mounting kit Sun Cover Corner clips Power Cable (2.0m) Fuse holder and fuse Installation guide and quick star documentation Mounting U bracket

SystemPod Pre-Cut f/Simrad NSS9 evo³ & B&G Zeus³ 9 & 1 Instrument - 3.6" Hole f/9.5" Wide Guard SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. “Where you need it…when you need it”. SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen. This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK129 Stanchion Kit. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to Quality - We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

GP1059 SailPod Pre-Cut f/Simrad NSE8 & B&G Zeus Z8 f/9.5" Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips - SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. Features: NavPod GP1059 SailPod Pre-Cut for Simrad NSE8 / B&G Zeus Z8 for 9.5" wide guard SailPods are for mounting a single Radar or Chartplotter at the helm Navigation at your finger tips NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions 10 year warranty on all Gen3 NavPods

Zeus3 7" Multifunction Display with Insight Charts Updated Features: Advanced WindPlot C-MAP® Easy Routing and Navionics® Autorouting support Easy-to-interpret C-MAP Navigation Palette Advanced WindPlot: provides users with a clearer view of wind trends, easier comparison of True Wind Speed (TWS) to True Wind Direction (TWD) and better display in small panels for use alongside charts, RacePanel or SailSteer features. C-MAP® Easy Routing and Navionics® Dock-to-Dock Autorouting: You will navigate faster and easier with automatic route planning. Menu activated, the feature automatically plots the shortest and safest course based on a boat’s draft, beam and height, creating a route around a landmass and other fixed navigational hazards. Requires C-MAP MAX-N+ charts, Navionics+ or Navionics Platinum charts. C-MAP Navigation Palette: Enhances the readability of C-MAP charts, especially near shore, making it easy to tell where the boat is in relation to a channel, navaid, ledges and drop-offs, or a point of land. The Zeus3 7 is a complete chartplotter navigation system for blue water cruisers and regatta racers. This high-performance multifunction display features a 7-inch widescreen display, incorporating SolarMAX™ HD technology for brilliant daytime visibility and ultra-wide viewing angles. To ensure reliable control in all conditions and situations, Zeus3 incorporates an all-weather touchscreen that works even while wet. It combines this with an integrated rotary dial and keypad capable of controlling all display functions. Both sets of controls can be used simultaneously, or Zeus3 can be switched to non-touch mode for dependable operation under the most extreme conditions. A high-performance processor enables responsive operation and quick chart redraw while moving, panning or zooming. Zeus3 is powered by B&G software designed specifically for sailors, and packed with a wide array of sail-specific functionality. See all key sailing data on a single screen with SailSteer, view laylines and tacking angles overlaid on charts, and plan more accurately with Sailing Time arrival estimates that factor in the realities of travel by wind. RacePanel delivers a range race-proven functionality including integration with B&G H5000 tactical systems for additional analytical and predictive capabilities. Built-in Wi-Fi lets you access charts, weather information, software updates and online support directly from your display via any Wi-Fi internet hotspot. GoFree® Wi-Fi also lets you mirror your Zeus3 screen on a compatible smartphone, and control your Zeus3 display from a compatible tablet, for an extra display that you can use anywhere on board. See what lies ahead beneath the water with built-in support for ForwardScan® sonar, and above the water with plug-and-play support for Broadband Radar® and AIS solutions. Enhance your situational awareness in crowded harbours and during races and regattas with tools like MARPA target tracking and AIS overlay. Complete autopilot integration means short-handed and single-handed sailors can take immediate control of their B&G autopilot system from any B&G Zeus3 display on board. Zeus3 also connects seamlessly to a wide range of sensors, instruments, displays, expansion modules, and accessories; allowing you to create a fully-integrated electronics solution to provide greater safety, performance, and enjoyment on the water. Specifications: Dimensions: 9.4"W x 5.9"H x 3.5"D Display: 7" IPS optically bonded TFT Resolution: 600 x 1024 Mounting Type: Bracket(supplied) or Panel Mount External Storage: 2 MicorSD, max. 32GB each Internal Storage: 16GB Supply Voltage: 10- 31.2 VDC Wifi: Yes Bluetooth: Yes Video: 2 x composite (RCA connectors) video inputs Ethernet: Yes NMEA 2000: Yes NMEA 0183: Yes Waypoints, Routes, Tracks: 6000 Waypoints, 500 Routes with 100 Max Route Points, 50 Tracks with up to 12,000 track points Preloaded with Insight Chart Cartography Supported: Insight, Navionics (Gold, Nav+, Platinum+), C-MAP (MAX N, MAN N+) NV Digital(Raster US Charts) Internal GPS Antenna Autopilot Support: Full Autopilot Control and commissioning

SystemPod Pre-Cut for Simrad NSS12 evo3/B&G Zeus3 12 & 2 Instruments (Simrad IS42/B&G Triton²/AP44 Square Hole) for 9.5″ Wide Guard SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. “Where you need it…when you need it”. SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen. A SystemPod is best mounted on a Single Bend AngleGuard. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to Quality NavPod stands behind their commitment by offering a 10-year warranty on all new Gen3 NavPods.

GP2080-17 SystemPod Pre-Cut for Simrad NSS9 evo3/B&G Zeus3 9 & 2 Instruments (Simrad IS42/B&G Triton2/AP44 Square Hole) for 12” Wide Guard  SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. “Where you need it…when you need it”. SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen. A SystemPod is best mounted on a Single Bend AngleGuard. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

SystemPod Precut for Simrad GO7 XSE, GO7 XSR & B & G Vulcan 7R In Center & 2 Additional Instruments (Simrad IS42, B & G Triton² & AP44 Square Holes; One On Each Side) for 9.5″ Wide Guard SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen. A SystemPod is best mounted on a Single Bend AngleGuard. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to Quality - We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

GP1500-32 SystemPod Pre-Cut for Simrad NSS7 evo3/B & G Zeus3 7 & Space for 9.5″ Wide Guard SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips… “Where you need it, when you neet it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen. A SystemPod is best mounted on a Single Bend AngleGuard. Features: Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to quality - We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.