M232 Pan/Tilt 9Hz Marine Thermal Camera The FLIR M232 marine thermal camera is the smallest and most affordable pan and tilt marine thermal night vision camera. Using the latest generation Boson(TM) thermal core, the M232 lets boaters see at night in 320 x 240 thermal resolution and also features 2x digital zoom. When the M232 is combined with a Raymarine Axiom MFD, FLIR’s ClearCruise™ intelligent thermal analytics technology offer boaters an entirely new level of awareness and safety. The M232 also uses IP video technology and simplifies installation by eliminating extra video signal cables. The M232 offers features 2X digital zoom capability. Make Navigation Safer The M232 improves navigation and safety by helping you see bridges, docks, buoys, and other vessels, night and day. The M232 also helps boaters find people in the water faster than using spotlights and radar alone. Long-Range, Optimized Viewing M232 features full 320x240 resolution for optimal horizon-to-horizon viewing, and 2X digital zoom for long-range performance. Easy to Install on any Vessel The combination of the M232’s small, lightweight design and IP video connectivity make it a snap to install and integrate with multiple MFDs. Enhanced Awareness with ClearCruise™ Combine M232 with a Raymarine Axiom MFD and take advantage of ClearCruise™ intelligent thermal analytics. ClearCruise™ provides audible and visual alerts when “non-water” objects such as boats, obstacles, or navigation markers are identified in the scene. Specifications: Detector Type: 320 × 240 VOx Microbolometer Video Refresh Rate: 9 Hz Field of View: 24° × 18° E-Zoom: 2x Image Processing: FLIR Proprietary Digital Detail Enhancement Thermal Resolution: 320 x 240 resolution for clear, detailed images Ethernet-Enabled: For simple integration with your other electronics Zoom: 2x e-Zoom for extended range performance Pan & Tilt: M232 with adjustable pan and tilt System Specifications: Pan/Tilt Range Pan: 360deg (continuos), Tilt: +110°, -90° Image Processing: FLIR Propriety Digital Detail Enhancement™ Video Output: H264 IP Video stream Power Requirements: 12 or 24 VDC Power Consumption: 15W (typical) 18W (max) What’s In the Box:  Every M132 and M232 thermal camera includes: Camera unit Top down riser kit Thermal camera base-seal Right-angled RayNet to RayNet cable, 32 feet (10 meters)  RayNet to RJ45 adapter cable, 4-inches (100mm)  Right-angled 3-pin power cable, 32 feet (10 meters)  Stainless steel mounting hardware kit *Notes: JCU3 joystick controller and IP to analog video decoder sold separately. When the M132/232 cameras are set for either Ball Down or Mirror Image configurations, the Clear Cruise feature is unavailable. This is due to the nature of the algorithm that supports this function and its relationship to the orientation of the horizon. At this time, there is no scheduled date on which this will be remedied.

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

5.5" Thermal Camera Mount Aft Leaning for M100 & M200 Series Get the most out of your FLIR M100 and M200 Series Thermal Camera with Seaview's Aft-Leaning Camera Mount. Measuring 5.5" tall, the Seaview Aft-Leaning Camera Mount provides flexibility in any installation, especially when saving space is a top priority.  Features: 5.5" Tall, Aft-Leaning Mount compatible with FLIR M100 and M200 Series Thermal Cameras Elevates electronics for optimum performance and allows for flexibility in installation Hollow, oval heavy-duty mast section supports mounted electronics and allows for convenient cable/wiring management Pre-drilled, 7" x 7" base footprint allows for a simple and easy installation Compatible Units: FLIR M132 FLIR M232 Specifications: Orientation: Aft-leaning Material: Marine-grade aluminum Finish: Powder coated white

Vision Series Mounting Plate for Raymarine T300 & T400 Thermal Cameras and Flir M-Series- Year 2017 and Newer With Edson's Vision Series Mounting System once you have selected the mount you want to install your electronics to you must select the corresponding plate that has the correct bolt pattern for your electronics. Edson's 68600 Vision Series Mounting Plate is designed for Year 2017 and NEWER Raymarine T300 & T400 fixed Mount Pan/Tilt Thermal Cameras and FLIR M-Series (M-324XP, M-625XP, M-324L, M-625L, M-612L, M-618CS, M-324S, M-324CS, M-625S, M-625CS, M-617CS, M132, M232).  Mounting Plates are required to complete an Edson Vision Series Mounting System. Order Base mount separately.  *7.8-inch Diameter with NO WING MOUNT CAPABILITIES

  FLIR is excited to announce the launch of the FLIR M-Series Thermal Promotion! For a limited time, save $1,000 on select M-Series stabilized thermal cameras.   Navigate at night like a pro with the enhanced situational awareness and peace of mind a FLIR M-Series camera brings aboard.  Hurry in to your authorized FLIR dealer and add a FLIR M-Series camera to your boat. The M-Series $1,000 rebate runs through July 7th, 2019 and is valid on the following M-Series models: M-324CS, M-625S, M-625CS and M-617CS.  *Offer valid now until July 7th, 2019     Specials    Closeouts   Remanufactured    Rebates  

  FLIR is excited to announce the launch of the FLIR M-Series Thermal Promotion! For a limited time, save $1,000 on select M-Series stabilized thermal cameras.   Navigate at night like a pro with the enhanced situational awareness and peace of mind a FLIR M-Series camera brings aboard.  Hurry in to your authorized FLIR dealer and add a FLIR M-Series camera to your boat. The M-Series $1,000 rebate runs through July 7th, 2019 and is valid on the following M-Series models: M-324CS, M-625S, M-625CS and M-617CS.  *Offer valid now until July 7th, 2019     Specials    Closeouts   Remanufactured    Rebates  

MTMS Marine Thermal Monitoring System - Formally called AX8 Gain an entirely new view of your vessel's mechanical system with the FLIR AX8 thermal monitoring camera. Combining thermal and visible cameras in a small, affordable package, the AX8 integrates with Raymarine multifunction displays (MFDs) and sends audible and visual alerts when the temperature of machine parts rise above preset thresholds. Keep a watchful eye on such critical equipment as engines, exhaust manifolds, and shaft bearings and spot problems before they leave you stranded on the water. And FLIR's exclusive MSXr imaging blends visible and thermal images for more detailed imagery that is easier to understand. Spot Potential Problems Before They Happen State-of-the-art thermal monitoring of engines and onboard machinery. Powered by Lepton, FLIR's most advanced micro thermal camera. Exclusive Multi-Spectral Dynamic Imaging (MSX®) for easy-to-understand thermal imagery. On Board Thermal Alarming & Visual Analysis Stream live thermal video of exhaust manifolds, propeller shafts, electrical panels, and other machinery. Program specific areas to generate automated spot alarms when temperatures exceed pre-set thresholds. Evaluate ongoing temperature trends. Help avoid costly repairs and unwanted breakdowns. Raymarine Integration View thermal, visible, and MSX video imagery on Raymarine LightHouse IIT MFDs. Continuous thermal monitoring with audible and visual alarms across the Raymarine network. Connect up to eight AX8 cameras using Ethernet View and record thermal video and snapshots from any Raymarine display on the network. Easy setup and alarm programming with a PC and web browser.

Camera Plate 3 Fits FLIR M300 Series Thermal Cameras for Dual Mount Systems The modular Dual Power Tower has been designed to allow your open array. radar, satdome and camera to be mounted together in one single space saving modular installation. Specifically for Camera plate 2 (FLIR M300 Thermal Imaging Cameras for Dual Mount Systems)

1.5" Thermal Camera Top Down Riser Mounts Vertical or Upside Down for FLIR MD-Series & Raymarine T-200 Ever wanted to hand your FLIR M-Series or Raymarine T-Series upside down? Well now you can with the Seaview Top Down Riser. Made from Kingstarboard a durable weather resistant marine grade polymer. Unique Design This unique design allows you to mount your FLIR MD Series or Raymarine T200 upside down. High Strength  Made from white ABS glass filled plastic. This helps prevent the plastic from cracking in severe conditions. Ribbing is added for increased strength.

PM5FM38 Thermal Camera Mount for FLIR M300 Series Vertical 8" Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.63" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.  Extra Security  No visible bolts on the camera mounting plate provides extra security and improved aesthetics.  Small Base Foot Print This mount is the perfect solution for installations where space is limited.

Mast Mount for FLIR Thermal Camera & Raymarine M-Series Achieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance.  Heavy Duty Six rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables. 

5" Thermal Camera Mount f/FLIR M100 & M200 - 8" Round Base Get the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation. Extra Security No visible bolts on the camera mounting plate provides extra security and improved aesthetics. Small Base Foot Print This mount is the perfect solution for installations where space is limited.

5.5" Thermal Camera Mount for FLIR M300 Series Cameras Seaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″. Cable Management  A hollow oval mast section provides plenty of room for cable management. Space Saving Design The small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.

PM5-FMT-8 Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation. Extra Security No visible bolts on the camera mounting plate provides extra security and improved aesthetics. Small Base Fotprint This mount is the perfect solution for installations where space is limited.

LTBSF3 Light Bar for Thermal Camera FLIR M300 Series for M2 Mounts Only - Must Pick a LTB Top Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters and etc. What's also unique with Seaview light bars is that they can fold over 90° to allow for extra height clearance. The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Many Styles There are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.