Standard Forward Wind Transducer Compatible with: ST70* ST60+ ST290 i70 Standard Length: 14 1/2" Includes 100ft. Cable. *Using with ST70 requires purchase of ST70 Wind Pod, sold seperately.

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

Wind Transducer with 30M Cable Elegant, Accurate & Affordable The FI5001 is an analog Wind Transducer for use with the FI50 and FI70 series of instrument displays. It is capable of detecting wind angle accuracy of better than ±10° and wind speed accuracy of better than ±5% (20 kt). The FI5001 has a power requirements of less than 40 mA on a 12VDC system. Important Note: The FI5001 Sensor does not come with a cable as standard, while the FI5001/30M comes with a 30 meter cable. Available 30 meter and 50 meter cable kits include a junction box. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

i60 SeaTalkng Instruments - Wind w/Wind Vane Transducer The all-new i60 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i60 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i60 Analog Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays. For the ultimate in flexibility the i60 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i60 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i60 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i60 Instruments are waterproof to IPX6 standards. The i60 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase. i60 Wind Instrument w/Windvane Transducer Full featured wind display for cruising and racing sailboats. The i60 Wind features an easy-to-read analog dial, nighttime red backlighting and high-contrast text and graphics. Short arm vane supplied with 30m (97.5') cable Compatible with Raymarine's masthead transducer (recommend for sailboats) Displays wind speed, direction, Beaufort, max wind speed, VMG, and tack Alarms for high and low apparent wind angle, low true wind speed, and maximum true wind speed. Apparent wind display and True wind when integrated with a compass or autopilot, and speed instrument i60 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. Large, crisp LCD displays with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70 and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

RSW Wired - Smart Performance Wind Transducer - Short Arm with 30M Cable The RSW Wired, Smart Wind transducer is a professional-level wind sensor designed to deliver highly accurate calibrated wind speed and direction data. Supplied with a 30-meter Smart Wind mast cable as standard. Install & Go! Raymarine Smart Wind technology delivers expert-level accuracy without the need for additional, expensive processors or extensive calibration and set-up.  Finely Tuned Through rigorous wind tunnel testing, we've fine-tuned and balanced the instrument to ensure that data from the masthead is accurate and consistent. Sail Smarter Trusted, high-accuracy True Wind data combined with the Alpha Performance Displays and Axiom Chartplotters let you sail smarter. Specifications: Length     Wind transducer (including cable): 657.762 mm (25.90 in) Wind transducer (excluding cable): 540.712 mm (21.29 in) Wired gateway: 155.61 mm (6.13 in) Width     Wind transducer: 46.96 mm (1.85 in) Wired gateway: 47.38 mm (1.88 in) Height     Wind transducer: 305.86 mm (12.04 in) Wired gateway: 30.61 mm (1.21 in) Power Nominal supply voltage: 12 V dc (via SeaTalk NG) Operating voltage range: 9 V to 16 V dc Power Consumption: < 100 mW Fuse rating: Ensure that the SeaTalk NG backbone is protected by a 5 A fuse NMEA 2000 LEN (Load Equivalency Number) - based on nominal 9 V rating: 1 Environmental Operating temperature range: -25°C to +55°C (-13°F to +131°F) Storage temperature range: -30°C to +70°C (-22°F to +158°F) Relative humidity: Masthead: 100%/Below deck: up to 93% @ 40°C Waterproof rating: Wind transducer: IPx6/IPx7/Wired gateway: IPx3 Wind: 115 mph (185 kph) Vibration: EN 60945:2002 (exposed) What's In The Box? No.10 x 3/4" self tapping screws x 4 (for mounting the wind transducer) No.7 x 3/4" self tapping screws x 2 (for mounting the gateway) 40 mm (1.57 in) heat shrink tube (required to insulate ground wire when shortening the mast cable) Ring crimp terminal (required for additional ground connection when the gateway is not mounted on a metal surface) Mast cable, 30 m (98.43 ft) reel Documentation Wind transducer Smart wind-wired gateway SeaTalk NG to DeviceNet adaptor cable, 120 mm (4.72 in)

Raymarine P66 Transom mount Transducer with 10m cable Compatible with the following: ST60+ Instruments ST290 Instruments ST70 Instruments* Compatible hull material: metal, wood and fiberglass Cable: 30ft (10m) Cable Depth, Speed & Temperature *Using with ST70 requires purchase of ST70 Depth Pod, sold separately

Platinum 2" Depth Sounder w/Transom Mount Transducer Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.   The Depth Sounders from Faria offer a 3-199 foot (1-61meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms.  Depth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists.   Depth Sounder includes a Faria SN2011 transom mount transducer w/25' cable. 2" - Hole Size: 2.0625" (53mm) Specifications: Imperial and Metric Values 199 Foot (61m) Depth Capability Audible and Visual alarm for Shallow/Deep Water Conditions Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Factory P/N DS0176 *Sold as an Individual *Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Active Imaging 2-in-1 Transducer & 83/200 Pod In-Hull Transducer with Y-Cable  Allows for connection of an in-hull puck transducer and an Active Imaging 2-in-1 (Side/Down) transducer to the single sonar port of an Elite Ti2 or Elite FS display. Features: Active Imaging 2-in-1 Transom Transducer 83/200 Pod/Puck Transducer without temperature Dual 9-pin Y-cable

FishTrax™ 1C-K Paddlesport Fishfinder with Carrying Case This powerful, handheld fishfinder uses SONAR technology to locate the fish depth and measure water temperature & bottom contour. Use it on a motorboat, kayak, or even on the ice in winter. The 1C-k kit comes with everything you need to easily mount the unit to a canoe or kayak.  Features: The 1C-k kit comes with everything you need to easily mount the unit to a canoe or kayak. 2” HD Color Display Waterproof Housing Easy-to-use menu options and settings.  Designed by fishermen, for fishing enthusiasts of all experience levels. Powered by four (4) AAA Batteries Use automatic mode for quick and easy setup, or dial in precise readings with manual mode. Ice Mode Digital Flasher allows precise jig depth readings while ice fishing. Programmable audible alarms let you know when fish are present, or the desired depth has been measured. VariableZone Temperature Sensor measures water temperature throughout the water column for species pinpointing. Polarized LCD for glare-free viewing Technical Specifications: Dimensions - 6" x 3" x 2" (153 x 77 x 51 mm) Screen Size (H x W) - 2" x 1.6" (50 x 40 mm)  Operating Temperature -  0 to 160°F (-18 to 71 °c)  Depth Range 1.5 ft 240 ft  (.5 to 75 m) Transducer Cable Length - 15 ft  (4.5 m) Transducer Frequency - Dual - 200/83 kHz Transducer Beam Angle - Dual - 14/26 Degree In the Box: 1C Handheld Fish Finder Mounting bracket Transducer w/15' cable  Mounting track with hardware Carrying case *Sold as a Kit

FishTrax™ Standard Transducer Have you lost, or damaged your standard FishTrax™ transducer?  This kit will get you back on the water in no time.   Includes all standard hardware and is 100% compatible with all FishTrax™ Series fish finders.  Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the Box: FishTrax™ transducer w/15' cable Velcro Cable Strap Rubber Float Stopper Closed-Cell Foam Float *Sold as an Individual

FishTrax™ 1C Fish Finder w/HD Color Display Introducing the world’s most versatile fish finder.  This powerful, handheld unit uses SONAR technology to locate fish depth and measure water temperature & bottom contour.   Use it on a motorboat, kayak, or even on the ice in winter. Features: 2” HD Color Display Waterproof Housing Easy-to-use menu options and settings.  Designed by fishermen, for fishing enthusiasts of all experience levels. Use automatic mode for quick and easy setup, or dial in precise readings with manual mode. Ice Mode Digital Flasher allows precise jig depth readings while ice fishing. Programmable audible alarms let you know when fish are present, or a desired depth has been measured.  VariableZone Temperature Sensor measures water temperature throughout the water column for species pinpointing. Polarized LCD for glare-free viewing Technical Specifications: Dimensions (H x W x D)  6" x 3" x 2" (153 x 77 x 51mm) Screen Size (H x W) -  2" x 1.6" (50 x 40mm) Operating Temperature - 0 to 160°F  (-18 to 71 °c) Depth Range -  1.5' to 240 ft (.5 to 75 M) Transducer Cable Length - 15' (4.5 m) Transducer Frequency - Dual 200/83 kHz Transducer Beam Angle - Dual 14/26° Power - four (4) AAA Batteries In the Box: FishTrax™ 1C fish finder Transducer w/15' cable *Sold as an Individual 

FishTrax™ Transom Mount Transducer  The FishTrax transom mount transducer allows high-speed, on-plane operation of all FishTrax fish finders.  Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the box: Transom mount transducer w/30' cable  Transom mount bracket w/mounting hardware Instruction manual *Sold as an Individual 

Chesapeake White SS 2" Depth Sounder with Thru-Hull Transducer Perimeter-lighted black dial with stylish Blue and White graphics, polished stainless steel bezel, and domed glass lens. The Depth Sounders from Faria offer a 3-199 foot (1-61meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms.  Depth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists.   Depth Sounder includes a Faria SN2060 thru-hull mount transducer w/26' cable. 2" - Hole Size: 2.0625" (53mm) Specifications: Imperial and Metric Values Domed Glass Anti-fog, Scratch Resistant Lens Programmable Keel Offest  Stainless Steel Bezel 199 Foot (61m) Depth Capability Audible and Visual alarm for Shallow/Deep Water Conditions Factory P/N DS0110 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Kronos 2" Depth Sounder with In-Hull Transducer Polished Stainless Steel Bezel, flat glass lens, Perimeter lighted spun Aluminum dial with Gold and Black graphics. The Depth Sounders from Faria offer a 3-199 foot (1-61meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms.  Depth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists.   Depth Sounder includes a Faria SN2010 In-Hull Transducer w/20' cable. 2" - Hole Size: 2.0625" (53mm) Specifications: Imperial and Metric Values 199 Foot (61m) Depth Capability Programmable Keel Offest Audible and Visual alarm for Shallow/Deep Water Conditions Flat Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Factory P/N DS0131 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Euro Black 2" Depth Sounder w/Transom Mount Transducer Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens. The Depth Sounders from Faria offer a 3-199 foot (1-61meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms.  Depth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists.   Depth Sounder includes a Faria SN2010 In-Hull Transducer w/20' cable. 2" - Hole Size: 2.0625" (53mm) Specifications: Imperial and Metric Values 199 Foot (61m) Depth Capability Audible and Visual alarm for Shallow/Deep Water Conditions Flat Glass Anti-fog, Scratch Resistant Lens Black Aluminum Bezel Factory P/N DS0101 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.