|
SP-80
Fixed-Mount Autopilot System
Cruise Control at Sea. The SP-80 takes the helm and sets you free.
For boaters who know where they're going. SP-80 takes you where you want to be--effortlessly. It's smart, precise piloting gives you the extra hand on deck you've always needed. And the operation is a snap: Simply set the course and the SP-80 takes the controls, piloting you to your destination with ease and precision. So bait the lines or simply enjoy the sunset. With the SI-TEX SP-80 Autopilot you're right on course. Hands free, and ready to really let you go.
Designed for inboard, outboard and sterndrive vessels with either hydraulic or quadrant steering systems.
Automatically pilots to your next waypoint using built-in NMEA 0183 Loran/GPS interface.
Waterproof control head easily installs flush or surface mounted.
System can be expanded by adding fully functional second-station option with the SI-TEX SP-70 Handheld Control Unit.
Bold, backlit display with ten levels of brightness for clear reading in any light.
Accurate digital displays of rudder angle and operating mode in use, constantly giving you up-to-the minute operating status.
Automatic Sea State and Trim controls and ten selectable levels of rudder sensitivity with high and low speed settings for smooth, precise steering.
Rudder feedback verifies autopilot's commands.
Ghost Rudder backup allows autopilot to use memory of rudder movements to calculate new movements in event of rudder feedback failure.
Heading Output feature allows you to stabilize radar display.
Built-in diagnostics and self tests, plus visual and audible alarms.
Power Steering mode offers convenient push-button steering. Stand-By mode for manual steering situations.
Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position.
Works with solenoid valves also.
Old Part # SP-80R
|
2856.95 |
|
|
SP-80
Fixed-Mount Autopilot System
Cruise Control at Sea. The SP-80 takes the helm and sets you free.
For boater who know where they're going. SP-80 takes you where you want to be--effortlessly. It's smart, precise piloting gives you the extra hand on deck you've always needed. And the operation is a snap: Simply set the course and the SP-80 takes the controls, piloting you to your destination with ease and precision. So bait the lines or simply enjoy the sunset. With the SI-TEX SP-80 Autopilot you're right on course. Hands free, and ready to really let you go.
Designed for inboard outboard and sterndrive vessels with either hydraulic or quadrant steering systems.
Automatically pilots to your next waypoint using built-in NMEA 0183 Loran/GPS interface.
Waterproof control head easily installs flush or surface mounted.
System can be expanded by adding fully functional second-station option with the SI-TEX SP-70 Handheld Control Unit.
Bold, backlit display with ten levels of brightness for clear reading in any light.
Accurate digital displays of rudder angle and operating mode in use, constantly giving you up-to-the minute operating status.
Automatic Sea State and Trim controls and ten selectable levels of rudder sensitivity with high and low speed settings for smooth, precise steering.
Rudder feedback verifies autopilot's commands.
Ghost Rudder backup allows autopilot to use memory of rudder movements to calculate new movements in event of rudder feedback failure.
Heading Output feature allows you to stabilize radar display.
Built-in diagnostics and self tests, plus visual and audible alarms.
Power Steering mode offers convenient push-button steering. Stand-By mode for manual steering situations.
Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position.
Works with solenoid valves also.
Old Part# SP-80RLP
|
2333.70 |
|
|
SP-70 Autopilot with Pump & Rotary Feedback
The SI-TEX SP-70 Autopilot will add relaxation to your cruising and fishing activity. Designed for most any boat and easily installed on outboard, inboard and sterndrive vessels with either hydraulic, or quadrant steering systems.
Features:
Ultra-compact, waterproof Control Unit has simple keypad operation and large LCD display of heading course, rudder angle, operating mode and error messages.
Control Unit can be used as dash-mounted keypad or quickly and easily removed from mounting bracket for use as a handheld portable.
Additional steering stations can be easily added with optional plug-in connectors.
Exceptionally easy to use. Just steer to desired course, press the PILOT key and the system takes over to steer you on your way. Automatically.
Built-in NMEA0183 Loran/GPS interface for precise course-line navigation along routes.
Bold, backlit displays with ten levels of brightness for clear reading in any light.
Digital displays of rudder angle and operation mode in use, constantly giving you up-to-the-minute operating status.
Automatic Sea State and Trim Controls and ten selectable levels of rudder sensitivity with high and low speed settings for smooth, precise steering.
Rudder feedback verifies autopilot's commands.
Ghost Rudder backup allows autopilot to use memory of rudder movements to calculate new movements in event of rudder feedback failure.
Heading Output feature allows you to stabilize radar display.
Built-in diagnostic and self tests, plus visual and audible alarms.
Power Steering mode offers convenient push-button steering. Stand By mode for manual steering situations.
Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position.
Works with solenoid valves also
|
2856.95 |
|
|
SP-80 - Control Head Only
For boaters who know where they're going. SP-80 takes you where you want to be--effortlessly. Its smart, precise piloting gives you the extra hand on deck you've always needed. And the operation is a snap: Simply set the course and the SP-80 takes the controls, piloting you to your destination with ease and precision. So bait the lines or simply enjoy the sunset. With the SI-TEX SP-80 Autopilot you're right on course. Hands free, and ready to go.
Features:
Designed for Outboard, Inboard, and Sterndrive vessels with Hydraulic or Mechanical steering systems.
Automatically pilots to your next waypoint using built-in NMEA 0183 Loran/GPS interface.
Waterproof control head easily installs flush or surface mounted.
System can be expanded by adding fully functional second-station option with the SI-TEX SP-70 Handheld Control Unit.
Bold, backlit display with ten levels of brightness for clear reading in any light.
Accurate digital displays of rudder angle and operating mode in use, constantly giving you up-to-the minute operating status.
Automatic Sea State and Trim controls and 10 selectable levels of rudder sensitivity with high and low speed settings for smooth, precise steering.
Rudder feedback verifies autopilot's commands.
Ghost Rudder backup allows autopilot to use memory of rudder movements to calculate new movements in event of rudder feedback failure.
Heading Output feature allows you to stabilize radar display.
Built-in diagnostics and self tests, plus visual and audible alarms.
Power Steering mode offers convenient push-button steering. Stand-By mode for manual steering situations.
Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position.
Works with solenoid valves also.
|
588.00 |
|
|
Includes Type "T" Mechanical Dashboard Drive w/ Built-in Rudder Feedback
SP-80
Fixed-Mount Autopilot System
Cruise Control at Sea. The SP-80 takes the helm and sets you free.
For boaters who know where they're going. SP-80 takes you where you want to be--effortlessly. It's smart, precise piloting gives you the extra hand on deck you've always needed. And the operation is a snap: Simply set the course and the SP-80 takes the controls, piloting you to your destination with ease and precision. So bait the lines or simply enjoy the sunset. With the SI-TEX SP-80 Autopilot you're right on course. Hands free, and ready to really let you go.
Designed for inboard, outboard and sterndrive vessels with either hydraulic or quadrant steering systems.
Automatically pilots to your next waypoint using built-in NMEA 0183 Loran/GPS interface.
Waterproof control head easily installs flush or surface mounted.
System can be expanded by adding fully functional second-station option with the SI-TEX SP-70 Handheld Control Unit.
Bold, backlit display with ten levels of brightness for clear reading in any light.
Accurate digital displays of rudder angle and operating mode in use, constantly giving you up-to-the minute operating status.
Automatic Sea State and Trim controls and ten selectable levels of rudder sensitivity with high and low speed settings for smooth, precise steering.
Rudder feedback verifies autopilot's commands.
Ghost Rudder backup allows autopilot to use memory of rudder movements to calculate new movements in event of rudder feedback failure.
Heading Output feature allows you to stabilize radar display.
Built-in diagnostics and self tests, plus visual and audible alarms.
Power Steering mode offers convenient push-button steering. Stand-By mode for manual steering situations.
Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position.
Works with solenoid valves also.
Old Part # SP-80MT
|
3299.70 |
|
|
Includes Type "S" Mechanical Dashboard Drive w/ Built-in Rudder Feedback
SP-80
Fixed-Mount Autopilot System
Cruise Control at Sea. The SP-80 takes the helm and sets you free.
For boaters who know where they're going. SP-80 takes you where you want to
be--effortlessly. It's smart, precise piloting gives you the extra hand on
deck you've always needed. And the operation is a snap: Simply set the
course and the SP-80 takes the controls, piloting you to your destination
with ease and precision. So bait the lines or simply enjoy the sunset. With
the SI-TEX SP-80 Autopilot you're right on course. Hands free, and ready to
really let you go.
Designed for inboard, outboard and sterndrive vessels with either
hydraulic or quadrant steering systems.
Automatically pilots to your next waypoint using built-in NMEA 0183
Loran/GPS interface.
Waterproof control head easily installs flush or surface mounted.
System can be expanded by adding fully functional second-station option
with the SI-TEX SP-70 Handheld Control Unit.
Bold, backlit display with ten levels of brightness for clear reading in
any light.
Accurate digital displays of rudder angle and operating mode in use,
constantly giving you up-to-the minute operating status.
Automatic Sea State and Trim controls and ten selectable levels of
rudder sensitivity with high and low speed settings for smooth, precise
steering.
Rudder feedback verifies autopilot's commands.
Ghost Rudder backup allows autopilot to use memory of rudder movements
to calculate new movements in event of rudder feedback failure.
Heading Output feature allows you to stabilize radar display.
Built-in diagnostics and self tests, plus visual and audible alarms.
Power Steering mode offers convenient push-button steering. Stand-By
mode for manual steering situations.
Optional analog Rudder Angle Indicator for easy, at-a-glance reading of
exact rudder position.
Works with solenoid valves also.
Old Part # SP-80MS
|
3138.70 |
|
|
SP-120 Color System with Rudder Feedback without Drive Unit
Features:
The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control
Does not require a separate junction box, everything simply connects to the rear of the control head
This Autopilot is ideal for small vessels under 38'
The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels
SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously
Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display
Extremely easy to select your desired headings, operate, and setup, with new user friendly software
High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response
Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to
enhance performance
NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes
NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay
Autopilot Steering Modes:
Manual (Power Steer)
Auto (Pilot maintains selected Magnetic course)
GPS (Steers to Waypoint or Routes when Interfaced with GPS)
Wind (Steers to wind when interfaced to wind sensor for Sailboat installations)
Protected by 2 Year SI-TEX Warranty
Specifications:
Waterproof: IPX6
Control Head Dimensions: 110 mm L x 110 mm W
Voltage supply VOLTAGE: 12/24 Volts DC
LCD Color LCD Display
Constant Compass Heading Indicator and Rudder Angle Indicator
Current consumption: 0.5 amps at 12VDC in standby mode
Maximum Drive Output Current 15 Amps
Operating temperature: -10ºC to +55ºC
Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output
Course Detection <1 Degree
Package Includes:
SI-TEX SP-120C Color LCD Autopilot Control Head
NMEA Interface Cables
9 Axis Electronic Rate Gyro Compass
Control Head Sun cover
Product manual
Mounting Screws
|
2267.16 |
|
|
SP-120 Color System with Rudder Feedback & 18CI Pump
Features:
The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control
Does not require a separate junction box, everything simply connects to the rear of the control head
This Autopilot is ideal for small vessels under 38'
The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels
SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously
Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display
Extremely easy to select your desired headings, operate, and setup, with new user friendly software
High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response
Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to
enhance performance
NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes
NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay
Autopilot Steering Modes:
Manual (Power Steer)
Auto (Pilot maintains selected Magnetic course)
GPS (Steers to Waypoint or Routes when Interfaced with GPS)
Wind (Steers to wind when interfaced to wind sensor for Sailboat installations)
Protected by 2 Year SI-TEX Warranty
Specifications:
Waterproof: IPX6
Control Head Dimensions: 110 mm L x 110 mm W
Voltage supply VOLTAGE: 12/24 Volts DC
LCD Color LCD Display
Constant Compass Heading Indicator and Rudder Angle Indicator
Current consumption: 0.5 amps at 12VDC in standby mode
Maximum Drive Output Current 15 Amps
Operating temperature: -10ºC to +55ºC
Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output
Course Detection <1 Degree
Package Includes:
SI-TEX SP-120C Color LCD Autopilot Control Head
NMEA Interface Cables
9 Axis Electronic Rate Gyro Compass
Control Head Sun cover
Product manual
Mounting Screws
|
2333.70 |
|
|
SP-120 Color System with Rudder Feedback & Type "S" Mechanical Dash Drive
Features:
The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control
Does not require a separate junction box, everything simply connects to the rear of the control head
This Autopilot is ideal for small vessels under 38'
The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels
SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously
Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display
Extremely easy to select your desired headings, operate, and setup, with new user friendly software
High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response
Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to
enhance performance
NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes
NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay
Autopilot Steering Modes:
Manual (Power Steer)
Auto (Pilot maintains selected Magnetic course)
GPS (Steers to Waypoint or Routes when Interfaced with GPS)
Wind (Steers to wind when interfaced to wind sensor for Sailboat installations)
Protected by 2 Year SI-TEX Warranty
Specifications:
Waterproof: IPX6
Control Head Dimensions: 110 mm L x 110 mm W
Voltage supply VOLTAGE: 12/24 Volts DC
LCD Color LCD Display
Constant Compass Heading Indicator and Rudder Angle Indicator
Current consumption: 0.5 amps at 12VDC in standby mode
Maximum Drive Output Current 15 Amps
Operating temperature: -10ºC to +55ºC
Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output
Course Detection <1 Degree
Package Includes:
SI-TEX SP-120C Color LCD Autopilot Control Head
NMEA Interface Cables
9 Axis Electronic Rate Gyro Compass
Control Head Sun cover
Product manual
Mounting Screws
|
2977.70 |
|
|
SP-120 Color System with Rudder Feedback & Type "T" Mechanical Dash Drive
Features:
The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control
Does not require a separate junction box, everything simply connects to the rear of the control head
This Autopilot is ideal for small vessels under 38'
The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels
SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously
Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display
Extremely easy to select your desired headings, operate, and setup, with new user friendly software
High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response
Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to
enhance performance
NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes
NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay
Autopilot Steering Modes:
Manual (Power Steer)
Auto (Pilot maintains selected Magnetic course)
GPS (Steers to Waypoint or Routes when Interfaced with GPS)
Wind (Steers to wind when interfaced to wind sensor for Sailboat installations)
Protected by 2 Year SI-TEX Warranty
Specifications:
Waterproof: IPX6
Control Head Dimensions: 110 mm L x 110 mm W
Voltage supply VOLTAGE: 12/24 Volts DC
LCD Color LCD Display
Constant Compass Heading Indicator and Rudder Angle Indicator
Current consumption: 0.5 amps at 12VDC in standby mode
Maximum Drive Output Current 15 Amps
Operating temperature: -10ºC to +55ºC
Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output
Course Detection <1 Degree
Package Includes:
SI-TEX SP-120C Color LCD Autopilot Control Head
NMEA Interface Cables
9 Axis Electronic Rate Gyro Compass
Control Head Sun cover
Product manual
Mounting Screws
|
3058.20 |
|
|
SP-120 System with Rudder Feedback & 9CI Pump
The SP-120 autopilot control system comprises the following units:
SP-120 display and control head
SI-TEX 9 Axis rate compass
Rudder Feedback Unit (SP-120R only)
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
Hydraulic system with helm pump and ram
Mechanical steering system
The autopilot should be connected to one of the following:
Reversing motor/pump set connected into the existing hydraulic steering system
Reversing mechanical drive unit connected to the existing steering mechanism
Electronic Hydraulic Solenoid Valves
|
2267.16 |
|
|
SP-120 System with Virtual Feedback & 9CI Pump
The SP-120 autopilot control system comprises the following units:
SP-120 display and control head
SI-TEX 9 Axis rate compass
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
Hydraulic system with helm pump and ram
Mechanical steering system
The autopilot should be connected to one of the following:
Reversing motor/pump set connected into the existing hydraulic steering system
Reversing mechanical drive unit connected to the existing steering mechanism
Electronic Hydraulic Solenoid Valves
|
1931.16 |
|
|
SP-120 Color System with Virtual Feedback - No Drive Unit
The SP-120 autopilot control system comprises the following units:
SP-120 display and control head
SI-TEX 9 Axis rate compass
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
Hydraulic system with helm pump and ram
Mechanical steering system
The autopilot should be connected to one of the following:
Reversing motor/pump set connected into the existing hydraulic steering system
Reversing mechanical drive unit connected to the existing steering mechanism
Electronic Hydraulic Solenoid Valves
|
2015.16 |
|
|
SP-120 Color System with Virtual Feedback & 9CI Pump
The SP-120 autopilot control system comprises the following units:
SP-120 display and control head
SI-TEX 9 Axis rate compass
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
Hydraulic system with helm pump and ram
Mechanical steering system
The autopilot should be connected to one of the following:
Reversing motor/pump set connected into the existing hydraulic steering system
Reversing mechanical drive unit connected to the existing steering mechanism
Electronic Hydraulic Solenoid Valves
|
2333.70 |
|
|
SP-80 Autopilot Second Station Kit
Full Function Remote 2nd Station for SP-80 Autopilots
Includes 25' of Cable
Permanent Mount
Features:
Automatically pilots to your next waypoint using built-in NMEA 0183 Loran/GPS interface
Waterproof control head easily installs flush or surface mounted
Bold, backlit display with ten levels of brightness for clear reading in any light
Accurate digital displays of rudder angle and operating mode in use, constantly giving you up-to-the minute operating status
Automatic Sea State and Trim controls and 10 selectable levels of rudder sensitivity with high and low speed settings for smooth, precise steering
Rudder feedback verifies autopilot's commands
Ghost Rudder backup allows autopilot to use memory of rudder movements to calculate new movements in event of rudder feedback failure
Heading Output feature allows you to stabilize radar display
Built-in diagnostics and self tests, plus visual and audible alarms
Power Steering mode offers convenient push-button steering. Stand-By mode for manual steering situations
Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position
Includes 25' of cable
|
756.00 |
|