|
Footrest Replacement Bushing - 3.5"
Internal Plastic Bushing Prevents Scratching Of Pedestal
|
18.37 |
|
|
FINISH THOMPSON A101938 3.5 IMPELLER
|
1487.04 |
|
|
March MDX-3 5/8 Pump 115V Motor 5/8" Ports
|
284.70 |
|
|
March TE-7K-MD 3.5" 3PH 3Ph 3/4 Hp 3.5" Imp Pump
|
1299.60 |
|
|
Heavy Duty Waterproof 2-Speed Wiper Motor - 3.5" Shaft - 12V
High Performance at a Competitive Price. Your boat's windshield wipers are only as powerful as the motor that power them. The Ongaro Heavy Duty Waterproof Motor offers the security of waterproof protection and delivers dependable, trouble-free operation all at a competitive price. Easily replaces older Ongaro and Bosch-type wiper motors for a simple, yet powerful, upgrade.
Features:
Torque of 15 N-m
Two speeds
Accepts up to 24 x 24" arm and blade
Self-parking gear to left or right
Adjustable sweep angle
12V
Improved waterproof rating to IP66
Rigid aluminum housing
Insulated grounding
EMC protected
CE Approved
Additional Features:
Two sweep speeds of 35 or 55 sweeps per minute
The sweep angle can be adjusted from 40 to 110 degrees
High quality all aluminum housing dissipates heat more efficiently than plastic for longer motor life
The aluminum construction also provides better stability when mounted
The insulated grounding is suitable for use with steel, aluminum, wooden or GRP boats
Guaranteed for 3 years
|
123.41 |
|
|
GP1523 SystemPod Pre-Cut for Raymarine a75/a77/a78 Mounted In Center for 9.5" Wide Guard
GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
331.62 |
|
|
Dual Actuator Marine Hardware Pack
High quality dual actuator hardware kit. This hardware bag is required in order to install hydraulic dual actuator systems. Includes: additional pipe nipples and brass "T" fittings.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
32.40 |
|
|
GP1040-22 SystemPod Pre-Cut for Raymarine ES97/ES98 & Space On The Left for 9.5 Wide Guard
NavPod GP1040 Series for 9.5" Guard SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
401.44 |
|
|
Heavy-Duty Winch Strap Replacement - Yellow - 3" x 20'
A 3" x 20' wide Yellow Heavy Duty Replacement Winch Strap constructed with 10,000 lb. webbing and a 10,000 lb. drop forged snap hook. For use on 3" wide winch strap drums.
|
32.99 |
|
|
Lower Housing Replacement Kit - 3.0 CAM
Includes diaphram and drive assembly
For the Following Pumps:
Silencer - 12VDC
Premium - 12VDC
Standard Blaster™ - 12VDC
Standard Blaster™ - 24VDC
ProBlaster™ - 12VDC
Pro Baitmaster™ - 12VDC
Pro Baitmaster™ - 24VDC
|
33.50 |
|
|
GP1040-15 SystemPod Pre-Cut for Raymarine c95/c97/e95/e97 & 1 Instrument for 9.5" Wide Guard
NavPod GP1040 Series for 9.5" Guard SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Sizing:
Overall Size: 9.5"H x 20.75"W x 6"D
Usable Face: 7.375"H x 17.5"W x 5"D
Max Cutout: 7"H x 17"W
Instrument Cutout: 3.6"
All SystemPods include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-proof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
401.44 |
|
|
GP1174 SystemPod Pre-Cut for Raymarine c125 / c127 / e125 / e127 & 2 Instruments for 9.5" Wide Guard
Instrument Cut Out Size:3.6" Hole
NavPod GP1170 Series for 9.5" Guard, SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all Gen3 NavPods.
*See Literature tab for an image with dimensions
|
462.53 |
|
|
GP1082 SystemPod Pre-Cut for Raymarine c95/c97/e95/e97 & 2 Instruments for 9.5" Wide Guard
Instrument Cut Out Size:3.6" Hole
GP1080 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards .
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
*See Literature tab for an image with dimensions
|
462.53 |
|
|
Heavy-Duty Winch Strap Replacement - Yellow - 3" x 25'
A 3" x 25' wide Yellow Heavy Duty Replacement Winch Strap constructed with 10,000 lb. webbing and a 10,000 lb. drop forged snap hook. For use on 3" wide winch strap drums.
|
38.63 |
|
|
Heavy-Duty Winch Strap Replacement - Yellow - 3" x 30'
A 3" x 30' wide Yellow Heavy Duty Replacement Winch Strap constructed with 10,000 lb. webbing and a 10,000 lb. drop forged snap hook. For use on 3" wide winch strap drums.
|
43.73 |
|