Table Support - Flush Mount - Fits 2-3/8" Pedestals Aluminum - Brite Anodized The Zwaardvis table pedestal systems provide a wide array of base options to cover most applications. All bases are designed to accept the innovative Zwaardvis tapered column for convenient removal and storage. Features and Benefits Bases are tapered for secure fit Three year limited warranty Base Outside Diameter: 7-1/16"

Table Support - Surface Mount - Fits 2-3/8" Pedestals Aluminum - Brite Anodized Table support options allow for fixed table tops receiving a dual tapered top column. The 60mm system is ideal for smaller diameter table tops in particularly tight quarters. Features and Benefits Bases are tapered for secure fit Designed for fixed table tops and dual taper columns Base Outside Diameter: 7"

Fore & AFT Seat Slide Pedestal Mount - Fits 2-7/8" Post  This seat slide pedestal mount has a 5-1/4" hole pattern and fits virtually all marine seat brands. Features: Cast aluminum mounting construction with injection-molded plastic handles Extruded aluminum seat slide allows for 5" of fore and aft travel 360° rotation with a locking knob Locks into pedestal posts with pre-tapped adjustment holes Class AD certified per ABYC standards Specifications: Post Size: Fits a 2-7/8" diameter post

Seat Mount Spider - Fits 2-3/8" Post This pedestal mount is fitted for 2-3/8" diameter pedestal posts. Features: Seat spider mount with adjustment knob and locking paddle handle Cast aluminum mount construction with injection-molded plastic handle 360° rotation with a locking knob A standard 5-1/4" hole pattern fits virtually all marine seat brands Class AD certified per ABYC standards

Trac-Lock Swivel/Slide Non-Locking Mount for 2-3/8" Post Trac-Lock slide and swivel seat mount are for a  2-3/8 in. post. Features: Travels 5-1/4″ Forward and backward with fingertip control Self-lubricated pads provide a smooth, easy glide Made of high-strength aluminum Rotates 360° Powder-coated swivel prevents corrosion Fits 2-3/8″ posts Specifications: Platform (inch): Large 7-1/4″ x 13″  *5-Year Limited Warranty

Taper-Lock™ Trac-Lock™ 2-3/8" Non-Locking Seat Mount Features: 7″ x 7″ Non-Locking Trac-Lock™ Swivel High-Strength Aluminum With Powder Coat Finish Rotates 360° Fits 2-3/8″  Post Adds 3/4″ To Height Of Pedestal

SWIVL-EZE LakeSport 2-3/8" Seat Mount with Friction Control - Aluminum LakeSport Seat Mount is 2-3/8 inch Locking AO-Aluminum, with Friction Control, 3 Degree Tilt, ABYC Code - AO, Installed Height - 5/8 inch, Bulk Packaging. Hardware is Engineered to Exceed ABYC Standards Type A/Operator Models lead the industry with these features: Ergonomic positive-locking handles with stainless steel components inch-Slot inch locking channels (on adjustable-height models) are the safest manual adjustment available. All Models are reinforced for strength: All LakeSport posts are swaged and welded to the bases Bases have underside ribs for superior strength.

Aluminum Ribbed Table Pedestal - 2-3/8" O.D. - 26" Length All columns are tapered on the bottom to submit a secure fit into the base while allowing for easy removal and storage. Features and Benefits Dual Taper Ribbed Satin Anodized Finish

Aluminum Ribbed Table Pedestal - 2-3/8" O.D. - 30-3/4" Length All columns are tapered on the bottom to submit a secure fit into the base while allowing for easy removal and storage. Features and Benefits Dual Taper Ribbed Satin Anodized Finish

Union T-Fitting f/3/8" Tube Compression Hose Fittings Union T-Fitting for 3/8" Tube Typical Applications:  T-Fitting for 3 standard 3/8" compression thread hose fittings  Specifications: 3/8 COMP FITTING ALL Sides = 9/16 - 24 UNEF 2A

Aluminum Ribbed Table Pedestal - 2-3/8" O.D. - 27-1/2" Length All columns are tapered on the bottom to submit a secure fit into the base while allowing for easy removal and storage. Features and Benefits Dual Taper Ribbed Satin Anodized Finish

Bushing for 2-3/8″ Swivel Replacement handles and assemblies for air-ride pedestals, seat mounts, etc. Features: Replacement and service parts for Trac-Lock™ seat mounts *5-Year Limited Warranty

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D. Pipe Color:Black Pipe Size:#5 Fits:2.375" O.D. Pipe Mount:Vertical JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 2.375" O.D. Pipe Color:White Pipe Size:#5 Fits:2.375" O.D. Pipe Mount:Vertical JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.

Taper-Lock™ Trac-Lock™ 2-3/8" Locking Seat Mount 2-3/8″ post mount with bushing for snug fit. Made of high-strength aluminum, with powder coat finish. Centrally located locking handle, easy to reach with left or right hand. Features: Rotates 360° For use with 2-3/8″ fixed height pedestals Post Adds 3/4″ To Height Of Pedestal