P10 Series Taco Marine customers can count on King StarBoard Polymer Sheets when it comes to creating new accessories or replacing wood, laminates or plastic parts on boats. The polymer sheet is environmentally stabilized to withstand the harshest marine conditions. It will not warp, rot or delaminate when exposed to humidity or water. It is also easy to fabricate with standard woodworking tools and requires little or no finishing. Features and Benefits High density polyethylene UV-stabilized Available in full and half sheets Also available in cut sizes that are individually wrapped for retail merchandising Withstands all harsh marine environments Three year limited warranty Made in USA Applications Electronic Boxes Cup Holders Shelves Cabinets Hatches and Doors Chart Holders Table Tops Rod Holder Racks Instrument Panels Tool Holders Leaning Posts Bait Wells and Covers Shower Floors

TACO Flared Weld-On Rod Holder 9-3/4"L x 1-3/4"ID - White Liner Polished Finish Taco Marine weld-on Aluminum rod holder is Brite Dip anodized for lasting protection and superior luster. Specially formulated, fungal-resistant PVC liners are tapered to fit snugly with flared rod holder design. Taco Marine Rod Holders with flared design allow for easy rod placement. Welded I-Beam pin construction seats rod butt securely in place and is proven to be 2-1/2times stronger than competitive rod holders. Features: Brite Anodized Aluminum Designed for welding to towers, T-tops, radar arches, railings, and leaning posts Welded I-Beam securely Seats rod butt Form-fitted Anti-fungal PVC liners Made in USA

Flared Weld-On Rod Holder 9-3/4"L x 1-3/4"ID - White Liner Polished Finish - 3/8" Coped Blade Taco Marine weld-on Aluminum rod holder is Brite Dip anodized for lasting protection and superior luster. Specially formulated, fungal-resistant PVC liners are tapered to fit snugly with flared rod holder design. Taco Marine Rod Holders with flared design allow for easy rod placement. Welded I-Beam pin construction seats rod butt securely in place and is proven to be 2-1/2 times stronger than competitive rod holders. Features: Brite Anodized Aluminum Ideal for welding to towers, t-tops, radar arches, railings, and leaning posts Flared style with 3/8" Coped Blade Welded I-Beam securely seats rod butt Includes form-fitted PVC anti-fungal white liner Three year limited warranty Made in USA

Hypro 3351-0005 1/2 X 3/4 White Bowl

Offset Hinge Size:1-1/2" x 2-3/4" Fastener: #10(5) Material: 316 Stainless Steel Offset:3/8"

Flush Pull Ring Size:1-1/2" x 1-3/4" Fastener:#6(4) Material:Chrome Plated Brass WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flush Pull Ring Size:1-1/2" x 1-3/4" Fastener:#6(4) Material:Polished Brass WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Clam Shell Midget Vent 1-1/2" x 1-3/4" Material: 304 Stainless Steel Size: 1-1/2" x 1-3/4" Fastener: #6 (3)

MAGNUS Escape Hatch - OD 26-3/4" x 26-3/4" Heavy Duty Ocean Hatch MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck. These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position. The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”. The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are currently in the market. Features: External Dimensions -  26 3/4" x 26 3/4" Cut Out Dimensions - 24 11/16" x 24 11/16" Number of Handles - 4  *VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Ampco Fluid End Aluminum Bronze Full Impeller for KC2 1 X 3/4

Groco Ibv-750 3/4 Bronze Ball Valve  

BERKELEY S13760, O'RING 10-1/2ID X 10-3/4 OD

Hawse Pipe Inner Hole: 4-3/4" x 2-3/4" Flange: 8" x 5" Fastener:#10(3) Pipe Depth:1-3/4" Material: 316 Stainless Steel

Clevis Pin - 4.7mm (3/16") x 19mm (3/4") Grade 316 Stainless Steel

Package Roller Shaft 1/2" x 12-3/4" with Cap Nuts - Zinc Roller shafts blister packed each with two cap nuts. Features: Length: 12-3/4" Max Grip: 12.190"