|
P10 Series
Taco Marine customers can count on King StarBoard Polymer Sheets when it comes to creating new accessories or replacing wood, laminates or plastic parts on boats. The polymer sheet is environmentally stabilized to withstand the harshest marine conditions. It will not warp, rot or delaminate when exposed to humidity or water. It is also easy to fabricate with standard woodworking tools and requires little or no finishing.
Features and Benefits
High density polyethylene
UV-stabilized
Available in full and half sheets
Also available in cut sizes that are individually wrapped for retail merchandising
Withstands all harsh marine environments
Three year limited warranty
Made in USA
Applications
Electronic Boxes
Cup Holders
Shelves
Cabinets
Hatches and Doors
Chart Holders
Table Tops
Rod Holder Racks
Instrument Panels
Tool Holders
Leaning Posts
Bait Wells and Covers
Shower Floors
|
98.22 |
|
|
Aluminum Ribbed Table Pedestal - 2-3/8" O.D. - 27-1/2" Length
All columns are tapered on the bottom to submit a secure fit into the base while allowing for easy removal and storage.
Features and Benefits
Dual Taper
Ribbed Satin Anodized Finish
|
42.78 |
|
|
A5 - 27-1/2" x 36" - Double Layer - Black
The A-Series are double layered making them softer, more durable & reversible.
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.
They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements.
|
96.97 |
|
|
A5 - 27-1/2" x 36" - Double Layer - Navy
The A-Series are double layered making them softer, more durable & reversible.
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.
They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements.
|
96.97 |
|
|
Polished Stainless Steel Table Pedestal 3" OD x 25-1/2" L
All of TACO's Z76-Series table pedestal columns are tapered on the bottom for a secure fit into the base while also allowing for easy removal and storage.
Features:
Available in satin anodized aluminum rib design or polished stainless steel
Available in three different lengths
Custom heights available based upon minimum order quantities
5-year limited warranty
Specifications:
Finish: Polished
Taper: Single
Material: Stainless Steel
Length: 25-1/2"
|
93.25 |
|
|
A6 - 34" x 46-1/2" - Double Layer - Black
The A-Series are double layered making them softer, more durable & reversible.
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.
They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements.
|
95.99 |
|
|
Aluminum Support Pole with Snap-On End 24" to 45-1/2"
Features:
Telescoping boat cover pole with cam-lock design
Helps prevent water stains and damage to boat
Available in two telescoping ranges: 24 to 45-1/2 inches and 30 to 57-1/2 inches
Finish: Satin Anodized
Telescoping Range: 24 to 45-1/2 inches
5-year limited warranty
|
19.43 |
|
|
Clevis Pin - 6.4mm(1/4") x 13mm(1/2")
Grade 316 Stainless Steel
10 Pack
|
3.52 |
|
|
Thru-Hull - 1-1/2" - White
Thru-Hull assembly, 1-1/2", White
|
10.75 |
|
|
Y-Stop 3" x 3" - 1/2" ID Yellow PVC
Features:
1/2" ID
Color: Yellow
PVC
Y-Stop
3" x 3"
|
5.58 |
|
|
Ampco Pumps P1GXPIP-1/2 Plastic Cap Plug
|
3.65 |
|
|
T-Top Aluminum Backing Plates - 5" x 6-1/2" x 1/4" - Pair
2 per pack
All backing & mounting plates are pre-drilled for installation.
|
71.74 |
|
|
BURKS T350G6-1 1/2, CENTRIFUGAL PUMP 3PH 5HP TEFC
Close Coupled, 60 Hz, Three Phase, 3500 RPM, 5 Horsepower, TEFC Motor Enclosure, Frame Size 184JM
UNSPSC Code: 40150000
|
3661.31 |
|
|
A2 - 15-1/2" x 19-1/2" - Double Layer - Black
The A-Series are double layered making them softer, more durable & reversible.
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.
They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements.
|
31.52 |
|
|
A2 - 15-1/2" x 19-1/2" - Double Layer - Navy
The A-Series are double layered making them softer, more durable & reversible.
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.
They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements.
|
31.52 |
|