Quick Release Fender Lock Receiver Only Stainless Steel & High Polish For dockside safety and convenience, Taco Marine's new fender lock ensures secure, quickly stored fender lines. The fender lock ensures that lines remain at the optimum length with the mounting pin attached. At the dock, you simply insert the pin into the fitting and your boat is protected, with the fenders their ideal position. The "Fender Lock Receiver Only" allows boaters the ability to quickly and easily place fenders in multiple places where they prefer to hang them off the boat at the desired height position every time. Features: Designed for simple single hand operation Will allow easy installation and removal of float style fenders Limited 3 year Warranty Specifications: Stainless Steel Type 316 Drain plug: 1/4" NPT

Quick Release Fender Lock Kit Enhance dockside safety and convenience with the Quick Release Fender Lock, which ensures secure, quickly stored fender lines that are set and maintained at your preferred length. This complete kit includes the locking Pull Pin and the Receiver. The Receiver features a spring-loaded hole cover that provides a finished look when the Pull Pin is not inserted and protects the interior of the receiver from the elements. The locking Pull Pin features a 1" diameter push button and a 7/8" diameter hole to accommodate a large line. When you're ready to set your fenders, simply insert the locking Pull Pin into Receiver. Features: Manufactured from stainless steel Type-316L Designed for fiberglass The overall height above the deck is 1-11/16" Features a 1" diameter button Nylon ring washer to separate dissimilar metals The mounting application fastens from the bottom of the Receiver 3-year limited warranty

Quick Release Fender Lock Stainless Steel High Polish For dockside safety and convenience, Taco Marine's fender-clip ensures secure, quickly stored fender lines. The Fender clips ensure that lines remain at the optimum length with the mounting pin attached. At the dock, you simply insert the pin into the fitting and your boat is protected, with the fenders their ideal position. Features: Designed for simple single hand operation Will allow easy installation and removal of float style fenders Large push-button for comfortable operation Large hole diameter for rope Limited 3 year Warranty Material Characteristics Stainless Steel Type 316 Overall height above deck: 1.60° Drain plug: 1/4" NPT

Pontoon Fender Lock Taco Marine introduces the latest in a line of accessories intended for easy docking along with safety and  convenience. Make your docking experience as effortless as possible. Quickly set your fender lines at the desired length off the side of your pontoon boat. The line remains at optimum length with the mounting pin attached. At the dock, you simply insert the pin into the fitting and your pontoon boat is protected with the fenders in their ideal position. Features: Stainless Steel Type 316 Designed for pontoon boats 1” diameter button Fits 1" - 1-1/4” square tube Nylon ring washer to separate dissimilar metals Mounting application fastens from the bottom of the square tube

Mooring Fender Lock Kit - Stainless Steel Pair Stainless Steel Fender Lock Kit 11575-3 makes hanging or moving fenders quick and easy. The two-part kit is easy to install with stainless steel screws or bolts (not included). Tie fenders to the key part of the kit then twist into the deck plate to secure fenders to the gunwale. No need to untie and retie fenders when moving or docking; just twist the key for installation or removal. Features: Accepts up to 1/2-inch diameter fender line Stainless steel construction and includes mounting hardware Includes two flush-mount stainless steel mounting plates and two stainless steel keys Quickly and easily install or move fenders when mooring Dimensions: Width: (inch) 2" Height: (inch) 1" *Line sold separately

Quick Release Rail Mount The Quick Release Rail Mount allows you to quickly mount and dismount your grill to the rail of your boat.  It features a quick-release knob for fast and easy set-up and break-down.  The grill mounting plate and rail mount are designed to separate and reattach without unscrewing any hardware and without the use of tools.  This simple design helps prevent the loss of small installation hardware, and helps ensure that your Rail Mount will be convenient and easy to use for many years.  The Quick Release Rail Mount is constructed of anodized aluminum with stainless steel hardware.  The Rail Mount allows the grill to hang outside or inside the boat's rail. Compatible With: Any Kuuma grill  Features: Grill mounting plate and rail mount are designed to separate and reattach for easy set-up and break-down Quick-release knob easily pulls and twists to lock in the "release" position, making grill removal simple Prevents losing small installation hardware during installation or removal Fits 7/8 to 1-1/4" round or square rails, allows grill to hang outside or inside boat's rail *Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKA-57 Quick Release Bracket The bracket and top plate allow you to easily slide the motor inboard (10") or easily remove it for storage and security. Features anodized aluminum construction with stainless steel components and hardware for optimal corrosion protection in all saltwater or freshwater environments. Features: Slide motor inboard 10" for a better boat cover fit and more clearance when launching the boat Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths Allows trolling motors to be quickly removed from and reattached to the boat deck The dual Cam-lock design reduces bracket movement and noise Includes stainless steel mounting hardware, a lanyard, and a locking pin Upper and lower plates include slots for securing with a padlock (not included) for added security Compatible with electric steer motors featuring QUEST technology Designed for use in freshwater or saltwater

MKA-21 Composite Quick Release Bracket Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors.  Features Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with padlock (not included) for additional security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the MKA-53 model. Designed for use in freshwater WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RTA-17 Composite Quick Release Bracket Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors.  Features: Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with padlock (not included) for additional security Compatible with Riptide Ulterra, Riptide Terrova, Riptide ST, Riptide PowerDrive, and Riptide SP NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the RTA-54 model. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKA-51 Quick Release Bracket The bracket and top plate allows you to easily slide the motor inboard (up to 6"), or easily remove it for storage and security. Features corrosion-resistant anodized aluminum construction with stainless steel hardware. Compatible with Ulterra™, Terrova®, PowerDrive™, PowerDrive V2 and DeckHand 40. Features: Slide motor inboard 6” for a better boat cover fit and more clearance when launching boat Allows trolling motor to be quickly removed from and reattached to boat deck Cam-lock design reduces bracket movement and noise Includes stainless steel mounting hardware, lanyard, and locking pin Upper and lower plates include slot for securing with padlock (not included) for added security WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Twist-Lock™ Dual Suction Mount with Quick Release Adapter This double suction cup mount (RAM-B-189-326U) was designed in collaboration with OtterBox Hardline Series for industrial applications. This kit includes a B-size RAM® Twist-Lock™ double suction cup base, a medium-length socket arm, and a RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series. With the quick-release tab, simply push the tab to dismount the tablet without having to adjust the mount itself. The double suction cup base consists of two 3.3" diameter RAM® Twist-Lock™ suction cups connected to a metal plate and B-size AMPS ball base for twice the amount of holding power as the single suction cup. Features: Dual suction cups for twice the holding power as a single suction cup, compatible with glass windshields and other smooth glass surfaces includes a fixed B-size ball base with hardware, a B-size medium-length socket arm, and a RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series Quick-release adapter with release tab for easy docking and removal of devices wrapped in an OtterBox Hardline Series case Backed by a lifetime warranty Specifications: Hardware Included: Assembly hardware Suction Size (inch): (2) 3.3" Diameter Bases, Total Width 7.95" Socket to Socket Length (inch): 3” Hole Pattern (inch):  2-Hole AMPS: 1.912” Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2.0 lb. and the heavy-duty use is 1 lb. Materials: Powder-coated steel, marine-grade aluminum, and high-strength composite  Weight: 1.27 lb.

Twist-Lock™ Suction Cup Mount with EZY-Mount™ Quick Release Adapter This single suction cup mount (RAM-B-166-326U) was designed in collaboration with OtterBox Hardline Series for industrial applications. This kit includes a B-size RAM® Twist-Lock™ suction cup base, a medium-length socket arm, and a RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series. With the quick-release tab, simply push the tab to dismount the tablet without having to adjust the mount itself. The RAM-B-224-1U suction cup base consists of a 3.3" diameter RAM® Twist-Lock™ suction cup connected to a RAM-B-238U diamond base with a 1" B-size rubber ball. The RAM® Twist-Lock™ suction cup base is a fan favorite for use on vehicle windshields and provides an extra-strong hold on any smooth, non-porous surface. Features: RAM® Twist-Lock™ suction cup base is ideal for vehicle windshields and other nonporous surfaces includes a B-size medium-length socket arm and RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series Quick-release adapter with release tab for easy docking and removal of devices wrapped in an OtterBox Hardline Series case Backed by a lifetime warranty Specifications: Hardware Included: Assembly hardware Suction Size (inch) 3.3” diameter  Socket to Socket Length (inch): 3” Hole Pattern (inch):  2-Hole AMPS: 1.912” Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2.0 lb. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum, high-strength composite, and cast acrylic Weight: 0.75 lb.

Universal Quick Release Mounting Bracket Quickly attach or remove any cable or electric-steer motors MotorGuide's rugged Universal Quick Release Mounting Bracket allows you to quickly attach or remove the trolling motor from your boat. The cam lock design is easy to operate and provides a snug and secure fit. This mounting bracket works with all MotorGuide cable and electric steer motors and allows you to switch from one motor type to another as your fishing style changes. Features: Easily remove motor for storage and security Design allows motor to slide inboard up to 5-3/4" clearance when launching a boat Corrosion resistant anodized aluminum construction with stainless steel hardware Additional top plate (sold separately) to easily switch between multiple motors Designated area for padlock (sold separately) to protect motor from theft WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKA-16-03 Quick Release Bracket For quick, easy removal of your electric-steer, bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system. Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40. - Allows trolling motor to be quickly removed from and reattached to boat deck - Sidescrew design attaches trolling motor to top bracket and slides into - deck-mounted bottom bracket, secured with tightening screw - Solid, anodized aluminum construction - Includes stainless steel mounting hardware - Brackets can be secured with padlock (not included) for additional security WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProMount Quick Release Mounting Bracket For years anglers have been demanding a strong, low profile, quick release bracket for holding their fishing electronics. Designed to handle today's most popular sonar units, GPS or portable radios. The ProMount Quick Release Bracket makes it possible to easily remove your electronics weighing up to three pounds from a permanently mounted base with one hand. The 360-degree swivel adjustment lets you see the unit from any angle. The Pro Mount will fit nearly all Lowrance, Garmin, Eagle, Hummingbird, Pin-Point and Vexilar electronics. The permanent base is available separately too, which makes it easy to place several bases around the boat or even in another boat. Several systems have been mounted in trucks to hold GPS units with great success.  The ProMount sells for much less than current brackets, but with more features and versatility. The sleek, low profile of the ProMount is only 1 1/8 inches high. The permanent base has no sharp edges to step-on or wear a hole in your boat cover. An optional installation hole cover spacer comes with every base to give you a well finished look to the mount when installed. Your electronics can also be mounted overhead and hang down on the secure locking rail system of the ProMount to increase the potential places you can mount electronics. The ProMount Quick Release Bracket comes with all stainless steel mounting hardware and the bracket is corrosion resistant. The ProMount is self-draining and easy to clean, so it even looks good when the electronics are not in your boat. Features: 360-degree swivel adjustment Sleek, low profile of the ProMount is only 1 1/8 inches high Fits nearly all Lowrance, Garmin, Eagle, Hummingbird, and Vexilar electronics Made of tough ABS plastic Stainless steel mounting screws One year warranty Made in the USA Specifications: Outside Dimensions: 3.45" x 4.75" Mounting Hole Spacing: 2.3" x 3.7" Mounting Hole Size: 1/4" Supports weights up to 3 pounds One year warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.