|
Teak Louvered Insert
Height:7-1/2"
Width:9-1/8"
Depth:3/4"
Cut Out
Height:6-1/2"
Width:8-1/2"
Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.
All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension
|
28.00 |
|
|
Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim
|
3440.34 |
|
|
4028 AC Isolation Cover - 7-1/2 x 10-1/2x3
Features:
Provides electrical insulation for exposed panel backs
Provides mechanical protection for panel backs protruding into lockers
Lightweight material is easily drilled for wire entrance and exit
Meets ABYC requirements for panels with combined AC and DC
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
71.21 |
|
|
Hand Crank 1200 lb. Winch - 7-1/2" Handle
After a full day on the water, everyone on the boat is tired. It could be from swimming off the back of the pontoon boat, racing around the lake in your speed boat, or just casting a line off the side of your fishing boat—when arriving at the shore, the last thing anyone wants to deal with is a faulty hand crank on your boat trailer. A winch is supposed to make the job easy and let boaters get out of the marina and back home sooner.
CURT hand winches are constructed from cold-forged steel to provide structurally superior pinions and eliminate gear-to-shaft bonding failures. They are designed to be mounted on a variety of trailers and are especially useful for boat trailers. CURT boat winches can also serve a number of other winch applications, though they are not designed for vehicle towing. This CURT hand winch or boat winch features a capacity of 1,200 lbs. with a gear ratio of 4.2:1. It has a hub diameter of 3/4" and a handle length of 7-1/2".
Features:
Crank-style boat winch for boat trailers or hoisting applications
Compatible CURT winch straps: #29007, #29450, or #29451
Constructed from high-strength, cold-forged steel
Equipped with a locking lever for increased safety
Solid gears provide superior strength compared to laminated gears
Strong pinions eliminate gear-to-shaft bonding failures
The broached pinion shaft securely engages the pinion gear
7-1/2" handle with plastic grip cover for easy, comfortable operation
Specifications:
Capacity: 1200 lb.
Finish: Clear zinc
Gear Ratio: 4.2:1
Handle Length: 7-1/2 in.
Hub Diameter: 3/4 in.
Hub Warehouse: D25
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
|
53.17 |
|
|
Hand Crank 1400 lb. Winch with 20' Strap & 7-1/2" Handle
After a full day on the water, everyone on the boat is tired. It could be from swimming off the back of the pontoon boat, racing around the lake in your speed boat, or just casting a line off the side of your fishing boat—when arriving at the shore, the last thing anyone wants to deal with is a faulty hand crank on your boat trailer. A winch is supposed to make the job easy and let boaters get out of the marina and back home sooner.
CURT hand winches are constructed from cold-forged steel to provide structurally superior pinions and eliminate gear-to-shaft bonding failures. They are designed to be mounted on a variety of trailers and are especially useful for boat trailers. CURT boat winches can also serve a number of other winch applications, though they are not designed for vehicle towing. This CURT hand winch or boat winch features a capacity of 1,400 lbs. with a gear ratio of 4.2:1. It has a hub diameter of 3/4" and a handle length of 7-1/2". It also comes with a 20' winch strap and zinc-plated snap hook.
Features:
Crank-style boat winch for boat trailers or hoisting applications
Compatible CURT winch straps #29007, #29450 or #29451
Constructed from high-strength, cold-forged steel
Includes 20' winch strap #29451 with zinc-plated snap hook
Equipped with a locking lever for increased safety
Solid gears provide superior strength vs. laminated gears
Strong pinions eliminate gear-to-shaft bonding failures
The broached pinion shaft securely engages the pinion gear
7-1/2" handle with a plastic grip cover for easy, comfortable operation
The base features slotted screw holes for flexible mounting
Specifications:
Capacity: 1400 lb.
Finish: Clear zinc
Gear Ratio: 4.2:1
Handle Length: 7-1/2 in.
Hub Diameter: 3/4 in.
Hub Warehouse: D25
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
|
70.79 |
|
|
Teak Louvered Insert
Height:6-3/8"
Width:11-3/16"
Depth:3/4"
Cut Out
Height:5-3/8"
Width:10-3/16"
Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.
All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension
|
29.40 |
|
|
Teak Louvered Insert
Height:9-3/8"
Width:18"
Depth:3/4"
Cut Out
Height:8-3/8"
Width:17"
Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.
All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension
|
52.09 |
|
|
Teak Louvered Insert
Height:16"
Width:9-1/8"
Depth:3/4"
Cut Out
Height:15"
Width:8-1/8"
Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.
All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension
|
46.56 |
|
|
Ampco Pumps CB+114M14T-S-3.75 Peo 1 1/2 X 1 1/2 Kit
|
1837.08 |
|
|
Ampco Pumps AC114MD56C-3.75 Peo 1 1/2 X 1 1/2 Kit 3.75
|
1668.60 |
|
|
Class 3 Ball Mount - 2" Shank - 7,500 lbs - 2" Drop & 7-1/2" Long
CURT class 3, or standard-duty, ball mounts are a step up from classes 1 and 2. They feature a 2" x 2" shank and have a higher weight capacity for towing heavy-duty trailers, including utility trailers, boat trailers, campers, single-horse livestock trailers, and most recreational vehicle trailers. With class 3 trailer hitches being the most common type of trailer hitch for pickup trucks and SUVs, the class 3 ball mount, by association, is an excellent complement to this trailer hitch and these larger vehicles (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.).
This particular class 3 ball mount has a gross trailer weight capacity of 7,500 lbs. and a tongue weight capacity of 750 lbs. It features a length of 7-1/2", a drop of 2", and a possible rise of 3/4". Class 3 ball mounts are CNC-formed and robotically welded to ensure unwavering precision and dependable strength in each and every unit. CURT mechanically descales each one to provide a smooth surface for a long-lasting finish. This class 3 ball mount comes with a durable gloss black powder coat finish to protect against corrosion, scratches, UV damage, and more to give it the thick skin it needs to face the road ahead.
Features:
Fits trailer hitches with a 2" x 2" receiver tube opening
Equipped with a 1" hole to accept a trailer ball shank
3/4" rise or 2" drop for precise trailer leveling
The hollow shank weighs less and can be used with an anti-rattle kit
CNC-formed, robotically welded, and mechanically descaled for a perfect fit
Protected by a durable powder coat finish
Made in USA
Specifications:
Ball Hole: 1 in.
Drop 2 in.
Finish: Gloss black powder coat
Gross Trailer Weight (GTW): 7,500 lb.
Hub Warehouse: D01
Length: 7-1/2 in.
Material: Carbon steel
Part Type: Class 3 ball mount
Receiver Tube Size: 2 in.
Rise: 3/4 in.
Tongue Weight (TW): 750 lb.
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
*Trailer ball and hitch pin sold separately
|
22.06 |
|
|
iPad Rack
Outside: 8"W x 9-5/8"H x 1-1/16"D
Inside: 7-1/2W x 9-5/16"H x 9/16"D
Charging cable cut-out
Can be mounted horizontally or vertically
Pre-drilled mounting holes
|
55.75 |
|
|
GP1518 SystemPod Pre-Cut for Simrad GO7/B&G Vulcan 7 & 1 Instrument for 9.5" Wide Guard
GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuard.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
331.62 |
|
|
GP1500-17 SystemPod Pre-Cut for Simrad GO7/B&G Vulcan 7 & 1 Instrument for 9.5" Wide Guard
GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuard.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
331.62 |
|
|
Myers Pumps 05014A167 Gasket
Rubber Gasket, 8-3/4" OD
|
11.34 |
|