|
Springlift Black Composite - 10mm Socket - Extended 26.9" - Compressed 15.2"
Attwood is partnered with Stabilus®, the world’s leading supplier of gas springs and related products with over 100,000,000 units in the field. All Attwood springs are made with biodegradable, no-hazard water-grade oil (WGK). making them the marine industry’s most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray, and a 30,000-cycle lifecycle test. Attwood springs come with support to ensure the proper spring for a specific application, including marine, industrial, agricultural, pharmaceutical, food processing, and medical.
Specifications:
Extended: 26.97 in.
Compressed: 15.20 in.
Stroke: 11.77 in.
End Fitting: 10mm Socket
Available Output Force: 30-180 lbs.
|
21.01 |
|
|
RAM Composite 1" Ball Mount with 6.25" X 2" Rectangular Plate & Track Ball™ Base
The RAP-B-111B-354-TRA1U consists of a Track Ball™ base, composite double socket arm and 6.25" x 2" rectangle plate. The 6.25" x 2" rectangle plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. The Track Ball™ base can connect to virtually any track system including the RAM Tough-Track™
Overall Height:
6"
Ball Size:
1" Rubber "B" Ball Size
Material:
High Strength Composite Base
Marine Grade Aluminum Plate
Note:
Part number reflects product packaged in a poly bag.
|
30.60 |
|
|
Stainless Gas Spring - 10" - 10mm Socket
Popular replacement gas springs for the aftermarket. The pressure tube and rod are made of a stainless steel alloy, while all other exposed components are stainless steel or marine-grade composite.
Features:
Offer more durability than competitors' gas springs
This gas spring can be used for saltwater use
The best spring for livewells, line lockers, deck hatches, and other moisture-prone areas
Specifications:
Extended Length: 10 in.
Compressed Length: 7 in.
Stroke: 3
End Fitting Type: 10mm Socket
Standard Output Force: 60 lbs.
|
22.55 |
|
|
RAM Composite Double Socket Arm f/1" Ball Bases
Part #: RAP-B-201U
Standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 3.69"
Socket-To-Socket Length: 3"
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
9.48 |
|
|
Composite Double Socket Swivel Arm
The RAP-B-200-12U, double socket swivel arm, consists of double 1" diameter open ball sockets with a 360° rotation point at the center of the arm. The rubber ball and socket at each end, and a central pivot point provides unsurpassed adjustability. The RAM ball sockets maximize ball coverage for optimal fit.
Dimensions:
Overall Length: 3.69"
Socket-To-Socket Length: 3.5"
|
13.62 |
|
|
PP4900-09 PowerPod Pre-Cut for Raymarine c95, c97, e95 & e97 - Carbon Black
The PP4900 Series, PowerPods are a better option than bracket mounting. PowerPods provide a clean look of flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are great for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
427.62 |
|
|
Cockpit Marine Oil Pressure Gauge - 80 PSI - Black Dial/Bezel
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.
Features:
0-80PSI Range
Works with 240-33 Ohm Oil Pressure Senders
12V Illumination bulb
Connection: M4 Stud
Mounting Hardware: Included
Input Type: Analog
Voltage: 12V
Dial Scale: Single
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.43 |
|
|
PP5203 PowerPod Pre-Cut for Raymarine c125/c127 & e125/e127 - Carbon Black
PP5200 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunnion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods include:
Acrylic capped ABS plastic
Chromed Stainless Steel tamper-proof fasteners
Double seal for watertight integrity
Swivel Base with large pass-through for wire harness
Models are available Pre-Cut for popular electronics
Overall Size: 14.5"H x 16.625"W x 10.5"D
Usable Face: 9.375"H x 14.5"W x 6.75"D
Max Cutout: 9.375"H x 14.25"W
|
471.26 |
|
|
Signature Series 3i Marine Wake Tower Speakers - 8.8" - Black
Bring on the action. The Signature Series 3i wake tower speakers produce a premium sound that cuts through the air and elevates your activity.
The Signature Series 3i range of premium marine speakers, subwoofers, wake tower speakers, and tweeters delivers crystal-clear audio and withstands marine conditions like never before.
With an enhanced design for the harsh marine environment, the Signature Series 3i range features new marinized connectors and a redesigned grille for easy installation and superior protection. Incorporating premium materials and superior acoustic engineering, you can enjoy that uncompromisingly pure listening experience on your boat, season after season.
With the included CRGBW LED illumination, the vibe on board is complete. Combining function and style, the Signature Series 3i range is made for life on the water, just like you.
*Mounting hardware not included.
Features:
Delivers premium sound quality suited for the marine environment
Marinized design with IP65 rating
Designed to optimally work with Fusion stereo systems and amplifiers
Custom DSP profiles with CRGBW illumination for a more ambient listening experience
True-Marine™ design from Fusion
Defined high-fidelity, low-frequency acoustics are a result of the excellent self-damping and bass reproduction
Flat mount and pipe mount mounting bracket accessory options
Engineered for the Wake
Designed specifically for wake boat applications, these speakers have a precisely calculated enclosure for high-quality audio reproduction at any volume level.
Marinized Design
An improved mechanical and material design delivers superior protection from the harsh marine environment, season after season.
True-Marine™ Philosophy
Any product that bears the Fusion True-Marine seal of assurance has been designed by Fusion to withstand the harshest marine environments season after season and comes with an industry-leading 3-year warranty.
Curv® Cone Technology
A lighter and stronger woven fiber composite produces greater sound definition at a higher volume.
LED Illumination
Cool white, red, green, blue, warm white. You can choose and mix colors to match the mood of your music.
System Integration
These speakers are designed to work optimally with Fusion stereo systems and amplifiers (sold separately) with custom DSP profiles. This requires the Fusion-Link™ smart-device app for setup.
Designed to Suit Your Boat
Available in 6.5” and 8.8” sizes in sports white or sports black. The 6.5” speakers feature redesigned enclosures and mounting bracket systems.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
1319.99 |
|
|
LightArmor Deck Mount Navigation Light - Black Composite - Port (red) - 2NM
INTRODUCING LIGHTARMOR NAVIGATION LIGHTS, a new line of streamlined deck mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.*
LED Light Engine
Cool to the touch
Long lasting - 50,000+ hours
Color indicated cores for ease of installation
Be Safe, Be Seen
Sharper cut-off angles and vibrant starboard and port colors for better visibility
2 NM U.S.C.G. Certified
Corrosion Resistant
Water-Resistant (IP Rating 67)
Features tell-tale indicators for ease of use
Smaller footprint with refined styling
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
28.96 |
|
|
LightArmor Deck Mount Navigation Light - Black Composite - Starboard (green) - 2NM
INTRODUCING LIGHTARMOR NAVIGATION LIGHTS, a new line of streamlined deck mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.*
LED Light Engine
Cool to the touch
Long lasting - 50,000+ hours
Color indicated cores for ease of installation
Be Safe, Be Seen
Sharper cut-off angles and vibrant starboard and port colors for better visibility
2 NM U.S.C.G. Certified
Corrosion Resistant
Water-Resistant (IP Rating 67)
Features tell-tale indicators for ease of use
Smaller footprint with refined styling
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
28.96 |
|
|
Dual Actuator Marine Hardware Pack
High quality dual actuator hardware kit. This hardware bag is required in order to install hydraulic dual actuator systems. Includes: additional pipe nipples and brass "T" fittings.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
32.40 |
|
|
Low Profile Composite Double Socket Arm
The RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Features:
Material: High Strength Composite
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag
Dimensions:
Overall Length: 2.75"
Socket-To-Socket Length: 2"
|
6.22 |
|
|
Silicone Marine Speaker Cover for 8" Speakers - Black
Special edition marine grade silicone covers to protect your 8" speakers from the harsh elements.
∗Sold as a pair
|
22.74 |
|
|
Marine Grip Tape - 3 x 12" - Black - 8 Pieces
Harken Marine Grip is a thin, reliable, nonabrasive grip tape that is more effective than adhesive alternatives, waxes and other products that reduces slipping. It also stands up to extreme marine conditions on boats, docks and stairs.
The superior grip is simple to install, clean and apply, and is cost-effective. And because it’s nonabrasive, it won’t damage clothing, wetsuits or skin. Harken Marine Grip is nonabsorbent, UV stable and good for all temperatures.
When compared, Harken Marine Grip outgrips other adhesive alternatives and waxes.
|
36.34 |
|