|
Electric Field Bilge Switch With Time Delay
All Whale bilge switches are designed and manufacturers with highest quality at heart. Combine these accessories with your whale bilge pump for a robust bilge system tailored to your vessel.
Features and Benefits
Environmentally friendly - no toxic mercury
Easy to install mounted on either horizontal or vertical surface (e.g.
bulkhead or hull)
Suitable for installations where amp draw is up to 15 amps
Compact design
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
66.64 |
|
|
Electric Field Bilge Switch
All Whale bilge switches are designed and manufacturers with highest quality at heart. Combine these accessories with your whale bilge pump for a robust bilge system tailored to your vessel.
Features and Benefits
Environmentally friendly - no toxic mercury
Easy to install mounted on either horizontal or vertical surface (e.g.
bulkhead or hull)
Suitable for installations where amp draw is up to 15 amps
Compact design
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
41.15 |
|
|
8 Circuit Engine Shutdown with Time Delay - Round Display
Features:
Required for Diesel Engines
Each engine shutdown display unit comes with:
Integrated alarm horn
Charged/discharged lights
Override switch for restart or control of auto-shutdown
Additional units and wire harnesses are available for a second station
|
540.00 |
|
|
Digital Bilge Switch - 12/24V
The 12/24V digital bilge switch activates your bilgepump automatically when water exceeds the acceptable level and deactivate when water has been removed.
For a fully automatic removal of your bilge water connect a switch to your electrical bilge pump. Field sensing digital technology, fully sealed without any moving parts. Will not corrode and are not affected by oil or debris.
Features:
Type: Electronic Switch
Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance
|
44.82 |
|
|
Ultra Safety Systems US Ultimate JR Bilge Switch 12V
ULTRA PUMPSWITCH JR
Automatic bilge pump switch.
6 1/4 inch high and 2 1/2 inch diameter (1 1/4 inch ON/OFF differential).
12 Volts at 15 Amps
5 year warranty
|
195.00 |
|
|
Ultra Safety Systems Bilge Switch Ultimate JR 24/32 VOLT
ULTRA PUMPSWITCH JR
Automatic bilge pump switch.
6 1/4 inch high and 2 1/2 inch diameter (1 1/4 inch ON/OFF differential).
24/32 Volts at 10 Amps (30 Amp relay)
5 year warranty
|
185.25 |
|
|
Jabsco 59400-0012 Hydro Air Bilge Switch 12V
|
87.10 |
|
|
Jabsco 59400-0024 Hydro Air Bilge Switch 24V
|
87.10 |
|
|
Control Silent Electric Toilet Rocker Switch
2 function rocker switch control panel 12/24V for waste disposal and flushing.
Features:
Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance
|
70.64 |
|
|
Ultra Safety Systems US Ultimate SR 12V Bilge Switch
ULTRA PUMPSWITCH SR
Automatic Bilge pump operation (1 1/4" differential) with isolated high water alarm switch (at 3"), built-in.
12V at 15Amp.
Alarm circuit is Normally Open or Normally Closed contacts (current limited to 100 mA max).
Lifetime warranty.
|
214.50 |
|
|
Ultra Safety Systems Ultimate SR 24/32 Volt Bilge Switch
ULTRA PUMPSWITCH SR
Automatic Bilge pump operation (1 1/4" differential) with isolated high water alarm switch (at 3"), built-in.
24/32V at 10 Amps U.L.(30 Amps relay).
Alarm circuit is Normally Open or Normally Closed contacts (current limited to 100 mA max).
Lifetime warranty.
|
224.25 |
|
|
Automatic Switch AS888
For full automatic bilge pumping operation, connect the automatic switch to your bilge pump. The AS888 automatic switch has a time-proven micro switch without mercury. When water exceeds the acceptable level, the pump is turned on by a rolling steel ball, which changes the pressure on the micro switch. The AS888 attaches to any SPX Johnson Pump Marine bilge pump through the clip on "T-slot" and can be used with 6, 12, 24 or 32 V systems. Use AS888 for a better and safer life afloat!
|
15.17 |
|
|
Electronic Bilge Switch - 12/24V
The 12/24V electronic bilge switch activates your bilge pump automatically when water exceeds the acceptable level and deactivates when the water has been removed. Switches DC positive and can be used with PN 01-66-027, Bilge Pump Panel 3-way 12/24V, in combination with any bilge pump. For fully automatic removal of your bilge water connect a switch to your electrical bilge pump. Fully sealed without any moving parts. Will not corrode and are not affected by oil or debris.
*Note: The product picture shows a similar product and the electronic bilge switch looks slightly different from the digital bilge switch.
|
39.42 |
|
|
Ultra Safety Systems Ultimate Mini Bilge Switch 12V
ULTRA PUMP SWITCH MINI
4 inch high, 1 3/4 inch diameter, 3/4 inch ON/OFF differential
12 Volts/40 Amp relay
20 Amp continues pump load
With Magnetic Test Switch
5 year warranty
|
204.75 |
|
|
TDR Series Dual Output Time Delay Relay 12V (2 x 80A)
This 12V dual-time relay can prevent dead batteries due to added equipment loads on after-engine stops or from multiple systems connected to a battery with an independent keep-alive power draw, maximizing operational readiness.
Applications:
Supports on-board video systems when vehicles are not in use, allowing lengthy downloading while shutting down less time-sensitive equipment. sooner.
Protects sensitive onboard electronics via optional under/over voltage shutdown and start event isolation.
Features:
Eliminates vehicle downtime due to dead batteries; the lowest off-state current draw (1.3 mA) is available
Simple and robust Installation - Sealed plug with optional long wire leads; Single device replaces multiple control units and high-amp replays reduce installation time, costs, and points of potential failure
Additional low-amp output can be used to maintain 24-hour memory circuits or to direct other equipment to shut down
Bullet-proof construction - Sealed unit and high-temperature materials allow mounting anywhere on the vehicle; Integrated thermal overload protection as well
Meets stringent OEM standards for electrical transient self-protection
Adjustable OFF Time Delay - 0 seconds to 4 hours
Kill Switch control input option for ensuring loads are not inadvertently on, maintenance/servicing of vehicles, and emergency OFF
Flexible control options via ignition key, alternator voltage sense, or both
4 Year Industry Leading Warranty
Specifications:
Maximum Current: Continuous: 80 Amps DC per Output (160 A Total); Intermittent: 120 Amps DC (5 Minutes) per Output
Off-State Current Draw: 1.5 mA (less than 1 Amp-hr battery dissipation per month of stand-by)
Operating Specifications: Voltage: 12 Vdc Nominal (8 - 18 Vdc); Temperature: -40 to 85 degrees C
Time Delay Options: 5 Sec through 4 hours via Dip Switches
Environment Protection Standards: Waterproof to IP66. IP6K9K; Ignition Protected to ISO 8846
Optional Features: Input stud voltage sense trigger for relay OFF; Under-voltage and over-voltage load protection
Focal Features:
Top Side Dip Switches
Accessible after installation, for programming time delay and determining active features. Protected by self-retained cover.
Stainless Steel Self-Locking Hardware
100% Non-ferrous corrosion-resistant materials. All attachment screws and nuts are self-locking.
Integral I/O Connector
Rapid and 100% correct assembly via Molex MX-150 connector eliminates poor field connections.
Standard and Optional Harnesses
The mating plugs with 2 feet of the ground and ignition wire included. Optional harnesses with additional outputs and alternate wire lengths are available
Easy Integration with CT Fuse Blocks
Optional EasyLink bus bars reduce the space and cost of connecting TDRs with CT series Fuse Blocks.
Easy Integration with RT Fuse Blocks
Optional EasyLink bus bars reduce the space and cost of connecting TDRs with RT series Fuse Blocks.
LED Diagnostics
Indicates a pending relay OFF event due to under/over voltage or external off trigger. Output on/off status is also provided.
|
132.64 |
|