Gulper 320 High Capacity Waste/Bilge Pump 24V High Capacity Waste Pump- Fast Drainage and space saving on board No clog, no filter waste pump built on more than a decade of market leading pump technology Gulper 320 - the easy access remote mount bilge pump designed to be located high, dry and protected - ideal where bilge space is very limited. Features Ideal where bilge space is limited-smallest footprint strainer Head rotates 360 degrees to suit your installation High - dry and protected - Remote mounting allows easy access Long life - runs dry without damage Meets requirement for primary bilge pump for boats up to 12m (39.4ft) length Easy to install - including uneven surfaces Secure fit - new wrap around mounting feature, only 3 screws to secure Reliable operation - Self priming Easy maintenance - patented reinforced Ezi-clamp locking ring -simply twist and screw to lock pump head in desired position WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gulper 320 High Capacity Waste/Bilge Pump 12V High Capacity Waste Pump- Fast Drainage and space saving on board No clog, no filter waste pump built on more than a decade of market leading pump technology. Gulper 320 - the easy access remote mount bilge pump designed to be located high, dry and protected - ideal where bilge space is very limited. Features Ideal where bilge space is limited-smallest footprint strainer Head rotates 360 degrees to suit your installation High- dry and protected - Remote mounting allows easy access Long life- runs dry without damage Meets requirement for primary bilge pump for boats up to 12m (39.4ft) length Easy to install - including uneven surfaces Secure fit - new wrap around mounting feature, only 3 screws to secure Reliable operation - Self priming Easy maintenance - patented reinforced Ezi-clamp locking ring - simply twist and screw to lock pump head in desired position WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gianneschi MAXI SUB 24V Submersible Pump 24V Submersible Bilge Pump for seawater and grey water   Maxi Sub - 24volt   Voltage: 24 V Power: 0,18 kW Max flow: 180 L/min @ 2 m Max head: 8m @ 30 L/min Outlet: 1", female (vertical) Stainless steel shaft (AISI 316) ; ABS open impeller Diameter: 180 mm Height: 290 mm IP rating : IP68

MACERATOR Pump - 12 VDC, 13 GPM SHURFLO's MACERATOR is designed to accommodate the need for a reliable, high performance waste evacuation pump. This pump incorporates a high quality motor with a seamless shell design that is thermally protected. The unique features of the MACERATOR include a premium impeller design with run dry capability, a dual blade and housing construction for problem free operation. Features: 12 VDC Seamless Motor Shell Sealed Manual Turn Key Run Dry Capability Dual Blade Design Ignition Protected Thermally Protected 1 Year Warranty CE Listed

MACERATOR Pump w/180° Port - 12 VDC, 13 GPM SHURFLO's MACERATOR is designed to accommodate the need for a reliable, high performance waste evacuation pump. This pump incorporates a high quality motor with a new seamless shell design that is thermally protected. The unique features of the MACERATOR include a premium impeller design with run dry capability, a dual blade and housing construction for problem free operation. Features: 180° Port 12 VDC Seamless Motor Shell Sealed Manual Turn Key Run Dry Capability Dual Blade Design Ignition Protected Thermally Protected 1 Year Warranty CE Listed

Jabsco 55320-1380V & Lobe Pump W/Certs 3/4" TC 55320 Ultra Hygienic Rotary Lobe Pump - Port Size inlet / outlet - Standard 3/4" (19 mm) - Displacement US Gallons (litres) 0.77 Gallons (2.9 litre) @ 100 revs - Flow Rate US gallons (litres) 11.6 GPM (44 LPM) - Operating Pressure 290 psi (20 bar) - Speed 1500 max (rpm) - Operating temperature -22 to 284°F (-30 to 140°C)

Gulper Grouper Mk3 Fishbox/Waste Pump w/90° Ports - 24V Non clog electric Waste pumps without filters, built on more than a decade of market leading valve technology. Proven Diaphragm Technology Whale Gulper waste products have been at the forefront of marketing leading waste technology for over 2 decades. Rather than impeller motors, Gulper pumps contain reciprocating heavy duty diaphragms and specialized non-choke valves to handle grey, bilge, black and fishbox waste on board. Ideal Macerator Replacement in Fishbox Installations The Gulper Grouper Mk 3 builds on the decades of proven pump technology and now features 90° inlet and outlet ports with integrated non-choke valves. The improved design allows the pump to be used as a direct replacementfor macerator impeller pumps. Compared to typical macerators, the Gulper Grouper Mk 3 is quieter and lightweight. With diaphragm technology, the pump does not clog or suffer from motor burn out meaning a longer system life and less unwanted maintenance jobs! With a low power consumption and run dry capability the Gulper Grouper Mk 3 really is the pump of choice for fishbox evacuation. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gulper Grouper Mk3 Fishbox/Waste Pump w/90° Ports - 12V Non clog electric Waste pumps without filters, built on more than a decade of market leading valve technology. Proven Diaphragm Technology Whale Gulper waste products have been at the forefront of marketing leading waste technology for over 2 decades. Rather than impeller motors, Gulper pumps contain reciprocating heavy duty diaphragms and specialized non-choke valves to handle grey, bilge, black and fishbox waste on board. Ideal Macerator Replacement in Fishbox Installations The Gulper Grouper Mk 3 builds on the decades of proven pump technology and now features 90° inlet and outlet ports with integrated non-choke valves. The improved design allows the pump to be used as a direct replacementfor macerator impeller pumps. Compared to typical macerators, the Gulper Grouper Mk 3 is quieter and lightweight. With diaphragm technology, the pump does not clog or suffer from motor burn out meaning a longer system life and less unwanted maintenance jobs! With a low power consumption and run dry capability the Gulper Grouper Mk 3 really is the pump of choice for fishbox evacuation. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Grey IC Waste Pump 12V Unique Intelligent Control means Gulley IC Kit is all you need to manage waste from multiple drains through one pump Electrical signals are sent from the Two Way Manifold IC only when grey waste water needs to be pumped out Complete prewired grey waste system that handles waste from multiple drains using the high capacity Gulper IC pump. Features and Benefits Senses waste level through wall - not in contact with water Quiet drainage Removes the need to install a bulky grey waste tank Service free - No moving parts to clog or burn Fully potted circuitry - protected against water ingress WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ultima Bilge Pump UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port. All version are delivered with a removable check valve. The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 32 l/min - 500 GPH Capacity straight (13.6 V): 38 l/min - 600 GPH Amperage: 2.5 A Fuse Size: 5 A Connection: 3/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:105 mm - 4.1" Weight:0.66 kg - 23.3 oz.

Ultima Bilge Pump UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port. All version are delivered with a removable check valve. The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 38 l/min - 600 GPH Capacity straight (13.6 V): 51 l/min - 800 GPH Amperage: 3 A Fuse Size: 5 A Connection: 3/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:105 mm - 4.1" Weight:0.66 kg - 23.3 oz.

Ultima Bilge Pump UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port. All version are delivered with a removable check valve. The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 44 l/min - 700 GPH Capacity straight (13.6 V): 64 l/min - 1000 GPH Amperage: 3.2 A Fuse Size: 5 A Connection: 3/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:105 mm - 4.1" Weight:0.66 kg - 23.3 oz.

Ultima Bilge Pump UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port. For UltimaBilge 1250GPH we include threaded 1.1/4" & 1.1/8" discharge port. All version are delivered with a removable check valve. The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 51 l/min - 800 GPH Capacity straight (13.6 V): 79 l/min - 1250 GPH Amperage: 3 A Fuse Size: 5 A Connection: 1-1/8" and 1-1/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:117 mm - 4.6" Weight:0.66 kg - 23.3 oz.

Orca Auto 1300 12V Automatic Bilge Pump Orca Family - compact and powerful electric bilge pumps designed to be installed deep in the bilge. Features and Benefits Compact powerful submersible electric bilge pumps - with large filter base to ensure maximum surface area exposed to bilge water. High performance Compact design- fits in small spaces in the bilge Low amp draw means long battery life Efficient design - Large filter base ensures maximum surface area exposed to bilge water Simple installation- Multiple wire locations, extra long wires Easily maintained- Access to motor cartridge and filter area Reliability - Robust ABS fuel-resistant housing WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rule-Mate 2000 GPH 24 Volt Fully Automated Bilge Pump The Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8". Rule-Mate Intelligence Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8". 2000 GPH (7570 LPH) at 0' (27.2V) All-in-one pump and switch Extra long life heavy duty motor 1" NPS discharge with 1" AND 1 1/8" screw-on ports Three year warranty WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.