Gulper 320 High Capacity Waste/Bilge Pump 12V High Capacity Waste Pump- Fast Drainage and space saving on board No clog, no filter waste pump built on more than a decade of market leading pump technology. Gulper 320 - the easy access remote mount bilge pump designed to be located high, dry and protected - ideal where bilge space is very limited. Features Ideal where bilge space is limited-smallest footprint strainer Head rotates 360 degrees to suit your installation High- dry and protected - Remote mounting allows easy access Long life- runs dry without damage Meets requirement for primary bilge pump for boats up to 12m (39.4ft) length Easy to install - including uneven surfaces Secure fit - new wrap around mounting feature, only 3 screws to secure Reliable operation - Self priming Easy maintenance - patented reinforced Ezi-clamp locking ring - simply twist and screw to lock pump head in desired position WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gulper 320 High Capacity Waste/Bilge Pump 24V High Capacity Waste Pump- Fast Drainage and space saving on board No clog, no filter waste pump built on more than a decade of market leading pump technology Gulper 320 - the easy access remote mount bilge pump designed to be located high, dry and protected - ideal where bilge space is very limited. Features Ideal where bilge space is limited-smallest footprint strainer Head rotates 360 degrees to suit your installation High - dry and protected - Remote mounting allows easy access Long life - runs dry without damage Meets requirement for primary bilge pump for boats up to 12m (39.4ft) length Easy to install - including uneven surfaces Secure fit - new wrap around mounting feature, only 3 screws to secure Reliable operation - Self priming Easy maintenance - patented reinforced Ezi-clamp locking ring -simply twist and screw to lock pump head in desired position WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Inline Booster High Flow Electric Galley Pump - 12V This high-performance whale pump fits inline to increase the flow rate. Features: The narrow design is ideal for dropping into the water tank  Compact, quiet, lightweight design for use with pressure switch and microswitch systems An inexpensive way to upgrade a manual water system  Also suitable for pumping diesel  Low power consumption  Specifications: Pump Type: Inline Weight: 015 kg (0.3 lbs.) Voltage: 12 VDC Recommended Fuse Size: 5 amps Cable Length: 1m (3 ft.) Hose Connection: Suitable for 10 mm (38 in.) or 13 mm (1/2 in.) flexible hose use WX1511B (stern adapter 11-15 mm) and connect WX1504 (15 mm (5/8 in.) equal straight Filter Included: No  Length: 129 mm (5-1/16 in.) Width: 36 mm (1-7/16 in.) Materials: Pump Body: ABS Seal: Nitrile Strainer: Polyurethane  Impeller: PBT Cable: PVC Performance: Discharge Head: Flow rate per minute/current draw @ 12VDC 0 m (0 ft.): 15.8 liters (4 US gallons) 3.8 amps 1 m (3 ft.): 14.8 liters (4 US gallons) 3.7 amps 3 m (10 ft.): 12.8 liters (3.5 US gallons) 3.5 amps  1 Year Warranty: CE certified ISO 88846 ISO 10133 ABYC H-23 IP67

MACERATOR Pump - 12 VDC, 13 GPM SHURFLO's MACERATOR is designed to accommodate the need for a reliable, high performance waste evacuation pump. This pump incorporates a high quality motor with a seamless shell design that is thermally protected. The unique features of the MACERATOR include a premium impeller design with run dry capability, a dual blade and housing construction for problem free operation. Features: 12 VDC Seamless Motor Shell Sealed Manual Turn Key Run Dry Capability Dual Blade Design Ignition Protected Thermally Protected 1 Year Warranty CE Listed

MACERATOR Pump w/180° Port - 12 VDC, 13 GPM SHURFLO's MACERATOR is designed to accommodate the need for a reliable, high performance waste evacuation pump. This pump incorporates a high quality motor with a new seamless shell design that is thermally protected. The unique features of the MACERATOR include a premium impeller design with run dry capability, a dual blade and housing construction for problem free operation. Features: 180° Port 12 VDC Seamless Motor Shell Sealed Manual Turn Key Run Dry Capability Dual Blade Design Ignition Protected Thermally Protected 1 Year Warranty CE Listed

Jabsco 55320-1380V & Lobe Pump W/Certs 3/4" TC 55320 Ultra Hygienic Rotary Lobe Pump - Port Size inlet / outlet - Standard 3/4" (19 mm) - Displacement US Gallons (litres) 0.77 Gallons (2.9 litre) @ 100 revs - Flow Rate US gallons (litres) 11.6 GPM (44 LPM) - Operating Pressure 290 psi (20 bar) - Speed 1500 max (rpm) - Operating temperature -22 to 284°F (-30 to 140°C)

Gulper Grouper Mk3 Fishbox/Waste Pump w/90° Ports - 12V Non clog electric Waste pumps without filters, built on more than a decade of market leading valve technology. Proven Diaphragm Technology Whale Gulper waste products have been at the forefront of marketing leading waste technology for over 2 decades. Rather than impeller motors, Gulper pumps contain reciprocating heavy duty diaphragms and specialized non-choke valves to handle grey, bilge, black and fishbox waste on board. Ideal Macerator Replacement in Fishbox Installations The Gulper Grouper Mk 3 builds on the decades of proven pump technology and now features 90° inlet and outlet ports with integrated non-choke valves. The improved design allows the pump to be used as a direct replacementfor macerator impeller pumps. Compared to typical macerators, the Gulper Grouper Mk 3 is quieter and lightweight. With diaphragm technology, the pump does not clog or suffer from motor burn out meaning a longer system life and less unwanted maintenance jobs! With a low power consumption and run dry capability the Gulper Grouper Mk 3 really is the pump of choice for fishbox evacuation. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gulper Grouper Mk3 Fishbox/Waste Pump w/90° Ports - 24V Non clog electric Waste pumps without filters, built on more than a decade of market leading valve technology. Proven Diaphragm Technology Whale Gulper waste products have been at the forefront of marketing leading waste technology for over 2 decades. Rather than impeller motors, Gulper pumps contain reciprocating heavy duty diaphragms and specialized non-choke valves to handle grey, bilge, black and fishbox waste on board. Ideal Macerator Replacement in Fishbox Installations The Gulper Grouper Mk 3 builds on the decades of proven pump technology and now features 90° inlet and outlet ports with integrated non-choke valves. The improved design allows the pump to be used as a direct replacementfor macerator impeller pumps. Compared to typical macerators, the Gulper Grouper Mk 3 is quieter and lightweight. With diaphragm technology, the pump does not clog or suffer from motor burn out meaning a longer system life and less unwanted maintenance jobs! With a low power consumption and run dry capability the Gulper Grouper Mk 3 really is the pump of choice for fishbox evacuation. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Grey IC Waste Pump 24V Unique Intelligent Control means Gulley IC Kit is all you need to manage waste from multiple drains through one pump Electrical signals are sent from the Two Way Manifold IC only when grey waste water needs to be pumped out Complete prewired grey waste system that handles waste from multiple drains using the high capacity Gulper IC pump. Features and Benefits Senses waste level through wall - not in contact with water Quiet drainage Removes the need to install a bulky grey waste tank Service free - No moving parts to clog or burn Fully potted circuitry - protected against water ingress WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

750 GPH Ultima Combo Automatic Submersible Bilge Pump 12V Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump. CE-Approved Features: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 3/4" Includes Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 44 l/min - 700 GPH Capacity straight (13.6V/27.2V): 50 l/min - 800 GPH Amperage: 3 A Fuse size: 5 A Connection: 3/4" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 14.4 oz.

1250 GPH Ultima Combo Automatic Submersible Bilge Pump 12V Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump. CE-Approved Features: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 1-1/8" Does not include Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 60 l/min - 952 GPH Capacity straight (13.6V/27.2V): 73 l/min - 1150 GPH Amperage: 3 A Fuse size: 5 A Connection: 1-1/8"" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 16 oz.

Orca 2000 GPH Submersible Bilge Pump 12V Orca Family - compact and powerful electric bilge pumps designed to be installed deep in the bilge. Features & Benefits: Compact powerful submersible electric bilge pumps - with large filter base to ensure maximum surface area exposed to bilge water High performance, Compact design- fits in small spaces in the bilge Low Amp draw means long battery life Efficient design - Large filter base ensures maximum surface area exposed to bilge water Simple installation- Multiple wire locations, extra long wires Easily maintained- Access to motor cartridge and filter area Reliability - Robust ABS fuel-resistant housing WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1000 GPH Ultima Combo Automatic Submersible Bilge Pump 12V Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump. CE-Approved Features: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 3/4" Includes Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 50 l/min - 800 GPH Capacity straight (13.6V/27.2V): 63 l/min - 1000 GPH Amperage: 3.2 A Fuse size: 5 A Connection: 3/4" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 14.4 oz.

Ultima Bilge Pump UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port. All version are delivered with a removable check valve. The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 32 l/min - 500 GPH Capacity straight (13.6 V): 38 l/min - 600 GPH Amperage: 2.5 A Fuse Size: 5 A Connection: 3/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:105 mm - 4.1" Weight:0.66 kg - 23.3 oz.

Ultima Bilge Pump UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port. All version are delivered with a removable check valve. The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 38 l/min - 600 GPH Capacity straight (13.6 V): 51 l/min - 800 GPH Amperage: 3 A Fuse Size: 5 A Connection: 3/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:105 mm - 4.1" Weight:0.66 kg - 23.3 oz.