Adhesive Mixing Tip For AT-6030 Our AT-650 mixing tip is designed specifically for use with our AT-6030 adhesive. AT-6030 is a 10 to 1 adhesive which requires a mixing tip with more mixing chambers to insure proper mixing before use. These mixing tips minimize waste compared with traditional 6" mixing tips. pkg contains 10 mixing tips.

AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives - 4" - Case of 10 Weld Mount's AT-850 tip is for use only with the 2010, 4020, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated. Features: Square Mixing Tip 4" Long Case of 10

Adhesive Mixing Tip For AT-6030 Our AT-650 mixing tip is designed specifically for use with our AT-6030 adhesive. AT-6030 is a 10 to 1 adhesive which requires a mixing tip with more mixing chambers to insure proper mixing before use. These mixing tips minimize waste compared with traditional 6" mixing tips. pkg contains 50 mixing tips.

Adhesive Dispensing Gun The AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.

AT-850 Square Mixing Tip 4" - Case of 50 Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated. Features: Square Mixing Tip 4" Long Case of 50

{Standard Start-Up Kit - No Adhesive The 65109 Start Up Kit has a wide variety of Weld Mount parts designed to give the user the chance to try numerous applications at a low cost. Kit Contains: 1 pc AT-300 Adhesive Dispensing Gun 5 pc. AT-850 Adhesive Mixing Tips 50 pc. AT-5 White Tie Mount 2 pc. AT-113 Blarge Black Footman's Strap 4 pc. ST125-1420-12SS 1.00" Stainless Stud 1 Plano Storage Box 11" x 7.25" x 2.75"

Polybonder Kit with AT-880 Adhesive Kit Contains: AT-880 Polybonder Adhesive (1) Dispensing Gun (1) Mixing Tips (qty 10) AT-5W (qty 30) Plano Case

AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & AT-6030 Adhesives AT-14 is specifically for Weld Mount AT-2010, AT-4020 and AT-6030 adhesives.

Dual Pusher Rod The AT-500 dual pusher rod is used to dispense equal amounts of our AT-2010 or AT-4020 adhesive for manual mixing. This dual pusher rod can not be used with our AT-300 or AT-350 mixing tips as it does not generate enough force to push the adhesives through the tip.

Adhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive Only The AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our AT-6030 38 ml 10:1 Adhesive Cartridge. This Hand Operated Gun And Our Mixing Tips Provide Precise Mixing And Dispensing Of Our Adhesives. The Mixing Tip Is Easily Replaced Should The Glue Set Up. We Recommend 5 Mixing Tips Per Cartridge Of Adhesive. A 10:1 Adhesive Plunger Is Included With Gun.

Acrylic Adhesive CAN NOT SHIP AIR,UPS GROUND ONLY AT-6030 is a 10 to 1 metal bonding adhesive. It has high viscosity and cures in 10 - 12 minutes, has a 6 minute working time and develops working strength in 40 minutes. AT-6030 develops in excess of 2,500 lbs (psi) tensile strength on most metal surfaces making it an ideal alternative to welding in many applications. AT-6030 has a 6 month shelf life and should always be stored refrigerated. Packaged in a 38ml cartridge this adhesive must be used with our AT-301gun, AT-12 plunger and and AT-650 mixing tips. The 38ml cartridge will bond 80 - 120 parts.

Acrylic Adhesive CAN NOT SHIP AIR,UPS GROUND ONLY AT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working strength in 15 -20 minutes. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 6 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts. ** AT 850 Mixing Tips sku 56273 required **

Acrylic Adhesive CAN NOT SHIP AIR,UPS GROUND ONLY AT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40 minutes. AT-4020 is recommended for composite and plastic bonding applications and not for bonding to metal substrates. Unlike other 2 part acrylic adhesives AT-4020 has a one year shelf life when stored at 72 degrees but is best refrigerated when ever possible. It is packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.

Acrylic Adhesive - 10-Pack CAN NOT SHIP AIR,UPS GROUND ONLY AT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40 minutes. AT-4020 is recommended for composite and plastic bonding applications and not for bonding to metal substrates. Unlike other 2 part acrylic adhesives AT-4020 has a one year shelf life when stored at 72 degrees but is best refrigerated when ever possible. It is packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.

Acrylic Adhesive - 10-Pack CAN NOT SHIP AIR,UPS GROUND ONLY AT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working strength in 15 -20 minutes. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 6 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.