|
Replacement External WiFi Antenna for Cortex M1
Replacement WiFi antenna for the Cortex V1 & M1. Increase the WiFi range from the M1 (Cortex hub) by installing the external WiFi antenna. The external WiFi antenna comes included with the Cortex M1 or V1. Additionally, the WiFi range can be extended with most third-party 2.4GHz, 802.11b/g/n WiFi boosters.
|
17.99 |
|
|
External GPS Antenna with 8" Cable for Cortex M1 & 10M Coax Cable
External GPS Antenna for Cortex M1 with 8" (200mm) cable. This multi-constellation GNSS Antenna is designed as an external antenna for the Cortex Hub, WatchMate Vision, or XB series of AIS transponders . It is IP67 and UV stable for use in a harsh marine environment. GNSS (Global Navigation Satellite System) includes GPS, GLONASS, Bei Dou and Gallileo positioning networks.
Features:
Small SMA connector for easy installation
Pre-wired 200mm (8”) RF cable for easy servicing
Two mounting configurations (deck or under deck)
UV stable housing provides good color stability
Specifications:
UV stable plastic with a zinc-plated alloy base
Dimensions: 60mm x 19mm
Loom: 200mm
Color: White
Mounting: Bulkhead, pole, deck, and underdeck mounting
|
89.99 |
|
|
Splitter Patch 2M Cable for Cortex M1 to External VHF
2M RG58 Coaxial Splitter Patch Cable (BNC to PL259) to connect an external VHF radio to the Cortex M1.
|
17.99 |
|
|
External Cellular Antenna with 5M (16') Cable & Mounts for Cortex M1
Extend the range of the remote monitoring by adding an external cellular antenna. The M1 Cortex transponder/hub includes a built-in cellular antenna however to increase the cellular range you can add this external antenna giving the antenna a clear view of the sky. The GPA680 comes with an antenna, 5M (16') cable, and mounts.
|
85.49 |
|
|
GA™ 38 GPS/GLONASS Antenna for Cortex® V1 & M1
Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile water-resistant housing and provides 3 easy mounting solutions: pole, surface, or under-deck (for the underside of fiberglass decks). External GPS/GLONASS antennas provide increased flexibility and installation options as well as the potential for enhanced reception of GPS/GLONASS signal for those products with built-in GPS/GLONASS antennas.
Specifications:
Dimensions (DxH): (inch) 3-19/32" x 1-5/18" / (mm) 91.6 x 49.5
Weight: 7.1 oz / 201 g.
Temperature Range: -22° F to 176° F / -30° C to 80° C
Case Material: Fully gasketed, high-impact plastic alloy, waterproof to IPX7
What's In The Box?
GA 38
Surface mounting bracket
Pole mounting bracket
Under-deck mounting bracket
Mounting hardware
BNC-SMA antenna cable (32 ft/10m)
Installation instructions
|
109.40 |
|
|
External Weatherproof Single Speaker for Cortex M1
Vesper’s External Weatherproof Speaker is designed for the marine environment. With IP66 ingress protection, they are suitable for mounting almost anywhere onboard. Compact in size, this speaker features heavy-duty molded plastic housing.
Features:
3” 70 Watt Speaker
Frequency response of 80Hz-18Khz
4 Ohms impedance
UV resistant polymer housing
IP66 water-resistant for marine applications
Polypropylene cone
Heavy-duty molded ABS plastic basket and grill construction
Rear plastic water guard housing protects magnet and internal components
Surface installation 75mm (2 1/8”) cut out
Supplied with 2m (6.5ft) or cable
Single speaker
|
31.49 |
|
|
Cellular Low Loss Cable for Cortex - 5M (16')
Replacement 5M (16’) coaxial cable for the Cortex GPA680 external cellular antenna. RG58 coaxial cable with SMA connectors and supplied with heat shrink to seal the connection to the antenna pigtail.
|
17.99 |
|
|
External GPS Antenna for Siren 3 Pro Includes 10' Cable
Optimize GPS tracking of your boat with the External GPS Antenna. When you remotely mount the External GPS Antenna, the Siren 3 Pro will override the use of the internal GPS antenna.
*Compatible with the Siren 3 Pro ONLY
|
59.89 |
|
|
External GPS Antenna for MDA-1
Features:
External GPS antenna for MDA-1
Optional for MDA-1 AIS transceiver
|
100.80 |
|
|
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. **
Click here to download form.
Cortex M1- Full Class B SOTDMA SmartAIS Transponder with Remote Vessel Monitoring - Only Works in North America
Full Class B SOTDMA with smartAIS send and receive and integrated no-loss splitter. Monitor and control onboard systems and keep alerted on board or ashore from your smartphone.
Features:
This Cortex model is made to function ONLY in North America
Add H1P portable handset for full VHF capability
Built-in Class B SOTDMA with no-loss antenna splitter
Built-in WiFi and Cellular connectivity on monitoring onboard and ashore
Low power consumption hub
10Hz GPS antenna
Monitor up to 5 sensors connected directly
Network to NMEA2000 to monitor sensors remotely and receive Man Overboard alarms from other devices
The Intelligent Boat
SOTDMA smartAIS transponder with remote vessel monitoring and control
Smart & Connected
Predicts collisions with other vessels and knows when someone falls overboard
Knows when your anchor is dragging and will tell you when something is wrong, whether you're onboard or ashore
Cortex is the brain of your boat
The smartAIS Advantage
smartAIS consumes very low power and continuously alerts even if your power intensive MFD or smartphone is switched off
smartAIS proactively alerts you of potential collisions, anchor drag and man overboard situations
Collision Prevention
smartAIS combines GPS, AIS and heading data with smart logic to proactively warns you of collision risks
Clearly see the highest risk vessels
When using a Cortex handset, smartphone, or tablet, make trial maneuvers to see a simulation of where and when your paths will cross
Anchor Watch
Sleep soundly or explore with abandon knowing that your boat is exactly where you anchored
By combining your position and heading, Cortex will determine if your anchor drags
When your boat moves outside your anchor swing radius the alarm will sound on Cortex handsets and your smartphone
Receive alerts while ashore via the Cortex Monitor App on your smartphone
Cortex will keep watch and alert you about changes in water depth, wind speed, or direction while you are anchored
Man Overboard (MOB)
When Cortex detects an AIS MOB activation it immediately sounds the alarm
Compatible with all AIS MOBs, you will see where the MOB was first activated along with continuous updates to its location, bearing, and range
Get clear information and take the best course
Label AIS MOB devices with crew names for easy identification
Pressing the dedicated MOB button activates a trackback mode on all handsets and marks the MOB on NMEA 2000 connected MFDs
Advanced SOTDMA Technology
SOTDMA is the latest AIS technology with 5W power output, making your boat visible over a longer distance
With faster and more frequent transmissions of your position to other vessels, you'll be safer, especially at speeds of over 14 knots
Connect via WiFi
Receive alerts on your smartphone, tablet, or smartwatch anywhere onboard
Connect up to 10 WiFi devices to receive and manage alarms, view AIS information and instrument data
Integrate Cortex to your NMEA 2000 network and use your mobile devices to view information your instruments provide
10Hz GPS Update Rate
With 10Hz GPS updates, your vessel position is more accurately plotted
When you connect other devices to your Cortex GPS using NMEA 2000 or NMEA 0183, all onboard equipment benefits from the superfast GPS
Integrated No-Loss Splitter
The integrated no-loss splitter allows you to share a single antenna with another VHF and delivers optimum performance for both your VHF and AIS
Low Power Consumption
With low input power, you can keep the Cortex always on, so you are always visible and always watching
Receive alerts without the need for power-hungry MFDs
Cortex Will Get Smarter.
New features and capabilities are downloaded automatically to the Cortex Onboard app for easy updates to Cortex via WiFi whenever convenient
Remote vessel monitoring and control
See your boat's status, receive alerts, and control devices
Easy setup, no fee
With built-in sensors, you can see twice-daily updates of your boat's location, battery level, true heading, ambient temperature, and barometric pressure
Connect to your NMEA network and monitor more - wind speed direction and water depth
As long as your smartphone and boat have cellular access, you can know your boat is safe and secure
No subscription, no hassle
Real-time monitoring and control
Subscribe to a Cortex Monitor Plan to receive alerts, see real-time information about your boat, and remotely control devices like lighting, air conditioning, refrigeration, or ice-makers
Whether you've left your boat, at anchor, or at the marina, know exactly where it is and what's happening onboard
The world's most advanced VHF radio
Upgrade to the future of VHF
The Cortex is VHF-ready, simply add wireless H1P handsets to enjoy the power of VHF and AIS combined
|
1019.99 |
|
|
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**
Click here to download form.
Cortex M1- Full Class B SOTDMA SmartAIS Transponder with Remote Vessel Monitoring - Works Worldwide
Full Class B SOTDMA with smartAIS send and receive and integrated no-loss splitter. Monitor and control onboard systems and keep alerted on board or ashore from your smartphone.
Features:
This Cortex model is made to function Worldwide
Add H1P portable handset for full VHF capability
Built-in Class B SOTDMA with no-loss antenna splitter
Built-in WiFi and Cellular connectivity on monitoring onboard and ashore
Low power consumption hub
10Hz GPS antenna
Monitor up to 5 sensors connected directly
Network to NMEA2000 to monitor sensors remotely and receive Man Overboard alarms from other devices
The Intelligent Boat
SOTDMA smartAIS transponder with remote vessel monitoring and control
Smart & Connected
Predicts collisions with other vessels and knows when someone falls overboard
Knows when your anchor is dragging and will tell you when something is wrong, whether you're onboard or ashore
Cortex is the brain of your boat
The smartAIS Advantage
smartAIS consumes very low power and continuously alerts even if your power intensive MFD or smartphone is switched off
smartAIS proactively alerts you of potential collisions, anchor drag and man overboard situations
Collision Prevention
smartAIS combines GPS, AIS and heading data with smart logic to proactively warns you of collision risks
Clearly see the highest risk vessels
When using a Cortex handset, smartphone, or tablet, make trial maneuvers to see a simulation of where and when your paths will cross
Anchor Watch
Sleep soundly or explore with abandon knowing that your boat is exactly where you anchored
By combining your position and heading, Cortex will determine if your anchor drags
When your boat moves outside your anchor swing radius the alarm will sound on Cortex handsets and your smartphone
Receive alerts while ashore via the Cortex Monitor App on your smartphone
Cortex will keep watch and alert you about changes in water depth, wind speed, or direction while you are anchored
Man Overboard (MOB)
When Cortex detects an AIS MOB activation it immediately sounds the alarm
Compatible with all AIS MOBs, you will see where the MOB was first activated along with continuous updates to its location, bearing, and range
Get clear information and take the best course
Label AIS MOB devices with crew names for easy identification
Pressing the dedicated MOB button activates a trackback mode on all handsets and marks the MOB on NMEA 2000 connected MFDs
Label AIS MOB devices with crew names for easy identification.
Pressing the dedicated MOB button activates a trackback mode on all handsets and marks the MOB on NMEA 2000 connected MFDs
Advanced SOTDMA Technology
SOTDMA is the latest AIS technology with 5W power output, making your boat visible over a longer distance
With faster and more frequent transmissions of your position to other vessels, you'll be safer, especially at speeds of over 14 knots
Connect via WiFi
Receive alerts on your smartphone, tablet, or smartwatch anywhere onboard
Connect up to 10 WiFi devices to receive and manage alarms, view AIS information and instrument data
Integrate Cortex to your NMEA 2000 network and use your mobile devices to view information your instruments provide
10Hz GPS Update Rate
With 10Hz GPS updates, your vessel position is more accurately plotted
When you connect other devices to your Cortex GPS using NMEA 2000 or NMEA 0183, all onboard equipment benefits from the superfast GPS
Integrated No-Loss Splitter
The integrated no-loss splitter allows you to share a single antenna with another VHF and delivers optimum performance for both your VHF and AIS
Low Power Consumption
With low input power, you can keep the Cortex always on, so you are always visible and always watching
Receive alerts without the need for power-hungry MFDs
Cortex Will Get Smarter.
New features and capabilities are downloaded automatically to the Cortex Onboard app for easy updates to Cortex via WiFi whenever convenient
Remote vessel monitoring and control
See your boat's status, receive alerts, and control devices
Easy setup, no fee
With built-in sensors, you can see twice-daily updates of your boat's location, battery level, true heading, ambient temperature, and barometric pressure
Connect to your NMEA network and monitor more - wind speed direction and water depth
As long as your smartphone and boat have cellular access, you can know your boat is safe and secure
No subscription, no hassle
Real-time monitoring and control
Subscribe to a Cortex Monitor Plan to receive alerts, see real-time information about your boat, and remotely control devices like lighting, air conditioning, refrigeration, or ice-makers
Whether you've left your boat, at anchor, or at the marina, know exactly where it is and what's happening onboard
The world's most advanced VHF radio
Upgrade to the future of VHF
The Cortex is VHF-ready, simply add wireless H1P handsets to enjoy the power of VHF and AIS combined
|
1619.99 |
|
|
Power Cable for Cortex - 6'
Replacement 6’ Power Cable for the Cortex M1 & V1.
|
26.99 |
|
|
5G Xtream System with 3 Antennas & 7M Cable
For boat owners looking for ultra-fast internet on board, the new 5G Xtream from Digital Yacht offers 4G and 5G connectivity as well as integration with Starlink satellite systems for the best and most affordable blended internet afloat.
The 5G Xtream can support 5G (shoreside) connection speeds up to 3.1GB/s but also integrates a 4G Cat 20 modem, which offers connectivity up to about 25NM from shore at speeds of up to 2GB/s. The system uses three external antennas with dual high-gain vertical antennas and a separate compact dome for the higher 5G frequencies. This MIMO technology and, critically, separate antennas give optimum performance. There’s support for dual SIMs with auto (failover) or manual switching between operators.
The 5G Xtream features dual-band (2.4 and 5GHz) wireless connections, so users on board simply search for the secure wifi point and connect. There are also 4 LAN ports (10/100/1000 MB) for wired devices like smart TVs and a WAN port that is optimized for Starlink satellite connectivity, allowing the 5GX to act as a sophisticated and fast router for all on-board internet communications.
The Wi-Fi router can also be configured to access marina wifi hotspots as an additional method of internet access. This also supports the very latest 5GHz marina wifi services, and there's also a high-gain external wifi antenna available as an accessory.
For advanced users, the 5G Xtream allows for user management, VPNs, blacklists, and IOT applications. NMEA 0183/2000 data can also be connected using Digital Yacht’s LANLink devices. The integrated GPS allows for SMS reporting of boat position or even a geofence/drift setting when the boat is at anchor or in port.
The Digital Yacht 5G Xtream is supplied as a complete solution with antennas, mounts, and cabling – all that’s additionally required is a cellular SIM.
Configuration
Configuration is very simple. Just insert the SIM cards. The 5G Xtream has two standard SIM slots, and it is possible to fit two SIMs from two different network operators. By default, the 5G Xtream will query the SIM that is installed and automatically select the APN settings from its internal database.
However, it is very important that users “lockdown” their wireless network with their network name (SSID) and wireless password. This task only takes a couple of minutes and is done via the 5G Xtream web interface.
User Interface
Accessing 5G Xtream functionality is done via an easy web interface. Any locally connected device can simply enter the IP address into the password-protected interface to set up functions, view traffic and logs, and configure wifi.
Once set up, there should be no requirement to log in other than for diagnostics and configuration. Users simply access the internet through the wifi connection, just as they would in the home or office.
Features:
Ultra-fast 5G internet afloat solution with speeds up to 3.1GBs plus also integrates the latest 4G Cat 20 LTE MIMO technology with a range up to 25NM offshore (network dependent) and 4G connection speeds up to 2GBs
Dual SIM slots with auto-failover or manual selection
Two external, high-gain, wide-bandwidth antennas plus a compact high-gain dome antenna for higher 5G frequencies
Dual-band integrated wifi router (2.4 & 5 GHz)—independently configurable
Built-in GPS with an external patch antenna for IOT and tracking/anchor alarm applications
4 x LAN ports
1 x WAN port for additional internet connectivity, optimized for Starlink satellite systems
Digital input/output connectivity for IoT/control applications
SMS capability
12/24v
Weight: 3800 g
Dimensions: 180 x 125 x 55 mm
operation
Specifications:
Operating Temperature: -40 to +75 degrees C
Dimensions: 180 x 125 x 55mm (excluding antennas)
Weight: 3,8 kg
Protection: IPX4
Technology: 5G Sub-6Ghz SA/NSA. Up to 2.1/3.3Gbps downlink (4×4 MIMO); 4G (LTE) CAT 20 up to 2GB/s
5G/LTE: 5G Sub-6Ghz SA/NSA. Up to 2.1/3.3Gbps downlink (4×4 MIMO); 4G (LTE) CAT 20 up to 2GB/s
3G/4G Fallback (Support bands): 5G (NSA): n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77; 5G (SA): n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78; 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B32; 4G (LTE-TDD): B38, B40, B41, B42, B43
4G & 5G Antennas: Dual Wi-Fi band independent 2.4 & 5 GHz (maximum 150 connections); dual 48cm external wideband high gain MIMO supplied with 7-meter cables and mounting bases. (10 & 20m options available) PLUS additional 100mm dome antenna for 4 x 4 MIMO operation and optimized for 5G (7m cable only)
Interfaces: 4 x LAN 10/100 Ethernet Port; 1 x WAN 10/100 Ethernet Port ; WiFi; 802.11 b/g/n/ac
What’s in the Box?
1 x 5G Xtream Modem Unit
1 x DC Power/IO cable
2 x External antennas
2 x E179F antenna bases
2 x 7m LMR200 antenna cables (N male to N male)
1 x 5G dual element dome antenna with pole/1” adaptor mount and integrated 7m cables
2 x Internal wifi antennas
1 x Internal GPS antenna
Options (sold separately):
1” antenna adaptors and range of mounts
10 & 20m LMR400 antenna cable packs for 4G antennas
AC 110/220v power adaptor
4GXWL hi power external wifi option
LANLink NMEA 0183/2000 interface
|
2065.50 |
|
|
External Cell Antenna Kit - 20'
The Wave WiFi high gain external cellular antenna is designed to be used with SIM activated cellular systems. The external cellular antenna features 1” - 14 threads for use on standard marine mounts (not included.)
Compatible with the MBR550 and/or the MNC1250.
Features:
20' of low loss 240 cable
1" - 14 Thread mount base
In the Box:
Wave WiFi cellular antenna
20' Cable
Quick start guide and manual
*Sold as an Individual
|
162.44 |
|
|
External Cell Antenna Kit - 30'
The Wave WiFi high gain external cellular antenna is designed to be used with SIM activated cellular systems. The external cellular antenna features 1” - 14 threads for use on standard marine mounts (not included.)
Compatible with the MBR550 and/or the MNC1250.
Features:
30' of low loss 240 cable
1" - 14 Thread mount base
In the Box:
Wave WiFi cellular antenna
30' Cable
Quick start guide and manual
*Sold as an Individual
|
200.48 |
|