|
External Weatherproof Single Speaker for Cortex M1
Vesper’s External Weatherproof Speaker is designed for the marine environment. With IP66 ingress protection, they are suitable for mounting almost anywhere onboard. Compact in size, this speaker features heavy-duty molded plastic housing.
Features:
3” 70 Watt Speaker
Frequency response of 80Hz-18Khz
4 Ohms impedance
UV resistant polymer housing
IP66 water-resistant for marine applications
Polypropylene cone
Heavy-duty molded ABS plastic basket and grill construction
Rear plastic water guard housing protects magnet and internal components
Surface installation 75mm (2 1/8”) cut out
Supplied with 2m (6.5ft) or cable
Single speaker
|
31.49 |
|
|
Splitter Patch 2M Cable for Cortex M1 to External VHF
2M RG58 Coaxial Splitter Patch Cable (BNC to PL259) to connect an external VHF radio to the Cortex M1.
|
17.99 |
|
|
Replacement External WiFi Antenna for Cortex M1
Replacement WiFi antenna for the Cortex V1 & M1. Increase the WiFi range from the M1 (Cortex hub) by installing the external WiFi antenna. The external WiFi antenna comes included with the Cortex M1 or V1. Additionally, the WiFi range can be extended with most third-party 2.4GHz, 802.11b/g/n WiFi boosters.
|
17.99 |
|
|
External GPS Antenna with 8" Cable for Cortex M1 & 10M Coax Cable
External GPS Antenna for Cortex M1 with 8" (200mm) cable. This multi-constellation GNSS Antenna is designed as an external antenna for the Cortex Hub, WatchMate Vision, or XB series of AIS transponders . It is IP67 and UV stable for use in a harsh marine environment. GNSS (Global Navigation Satellite System) includes GPS, GLONASS, Bei Dou and Gallileo positioning networks.
Features:
Small SMA connector for easy installation
Pre-wired 200mm (8”) RF cable for easy servicing
Two mounting configurations (deck or under deck)
UV stable housing provides good color stability
Specifications:
UV stable plastic with a zinc-plated alloy base
Dimensions: 60mm x 19mm
Loom: 200mm
Color: White
Mounting: Bulkhead, pole, deck, and underdeck mounting
|
89.99 |
|
|
External Cellular Antenna with 5M (16') Cable & Mounts for Cortex M1
Extend the range of the remote monitoring by adding an external cellular antenna. The M1 Cortex transponder/hub includes a built-in cellular antenna however to increase the cellular range you can add this external antenna giving the antenna a clear view of the sky. The GPA680 comes with an antenna, 5M (16') cable, and mounts.
|
85.49 |
|
|
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. **
Click here to download form.
Cortex M1- Full Class B SOTDMA SmartAIS Transponder with Remote Vessel Monitoring - Only Works in North America
Full Class B SOTDMA with smartAIS send and receive and integrated no-loss splitter. Monitor and control onboard systems and keep alerted on board or ashore from your smartphone.
Features:
This Cortex model is made to function ONLY in North America
Add H1P portable handset for full VHF capability
Built-in Class B SOTDMA with no-loss antenna splitter
Built-in WiFi and Cellular connectivity on monitoring onboard and ashore
Low power consumption hub
10Hz GPS antenna
Monitor up to 5 sensors connected directly
Network to NMEA2000 to monitor sensors remotely and receive Man Overboard alarms from other devices
The Intelligent Boat
SOTDMA smartAIS transponder with remote vessel monitoring and control
Smart & Connected
Predicts collisions with other vessels and knows when someone falls overboard
Knows when your anchor is dragging and will tell you when something is wrong, whether you're onboard or ashore
Cortex is the brain of your boat
The smartAIS Advantage
smartAIS consumes very low power and continuously alerts even if your power intensive MFD or smartphone is switched off
smartAIS proactively alerts you of potential collisions, anchor drag and man overboard situations
Collision Prevention
smartAIS combines GPS, AIS and heading data with smart logic to proactively warns you of collision risks
Clearly see the highest risk vessels
When using a Cortex handset, smartphone, or tablet, make trial maneuvers to see a simulation of where and when your paths will cross
Anchor Watch
Sleep soundly or explore with abandon knowing that your boat is exactly where you anchored
By combining your position and heading, Cortex will determine if your anchor drags
When your boat moves outside your anchor swing radius the alarm will sound on Cortex handsets and your smartphone
Receive alerts while ashore via the Cortex Monitor App on your smartphone
Cortex will keep watch and alert you about changes in water depth, wind speed, or direction while you are anchored
Man Overboard (MOB)
When Cortex detects an AIS MOB activation it immediately sounds the alarm
Compatible with all AIS MOBs, you will see where the MOB was first activated along with continuous updates to its location, bearing, and range
Get clear information and take the best course
Label AIS MOB devices with crew names for easy identification
Pressing the dedicated MOB button activates a trackback mode on all handsets and marks the MOB on NMEA 2000 connected MFDs
Advanced SOTDMA Technology
SOTDMA is the latest AIS technology with 5W power output, making your boat visible over a longer distance
With faster and more frequent transmissions of your position to other vessels, you'll be safer, especially at speeds of over 14 knots
Connect via WiFi
Receive alerts on your smartphone, tablet, or smartwatch anywhere onboard
Connect up to 10 WiFi devices to receive and manage alarms, view AIS information and instrument data
Integrate Cortex to your NMEA 2000 network and use your mobile devices to view information your instruments provide
10Hz GPS Update Rate
With 10Hz GPS updates, your vessel position is more accurately plotted
When you connect other devices to your Cortex GPS using NMEA 2000 or NMEA 0183, all onboard equipment benefits from the superfast GPS
Integrated No-Loss Splitter
The integrated no-loss splitter allows you to share a single antenna with another VHF and delivers optimum performance for both your VHF and AIS
Low Power Consumption
With low input power, you can keep the Cortex always on, so you are always visible and always watching
Receive alerts without the need for power-hungry MFDs
Cortex Will Get Smarter.
New features and capabilities are downloaded automatically to the Cortex Onboard app for easy updates to Cortex via WiFi whenever convenient
Remote vessel monitoring and control
See your boat's status, receive alerts, and control devices
Easy setup, no fee
With built-in sensors, you can see twice-daily updates of your boat's location, battery level, true heading, ambient temperature, and barometric pressure
Connect to your NMEA network and monitor more - wind speed direction and water depth
As long as your smartphone and boat have cellular access, you can know your boat is safe and secure
No subscription, no hassle
Real-time monitoring and control
Subscribe to a Cortex Monitor Plan to receive alerts, see real-time information about your boat, and remotely control devices like lighting, air conditioning, refrigeration, or ice-makers
Whether you've left your boat, at anchor, or at the marina, know exactly where it is and what's happening onboard
The world's most advanced VHF radio
Upgrade to the future of VHF
The Cortex is VHF-ready, simply add wireless H1P handsets to enjoy the power of VHF and AIS combined
|
1019.99 |
|
|
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**
Click here to download form.
Cortex M1- Full Class B SOTDMA SmartAIS Transponder with Remote Vessel Monitoring - Works Worldwide
Full Class B SOTDMA with smartAIS send and receive and integrated no-loss splitter. Monitor and control onboard systems and keep alerted on board or ashore from your smartphone.
Features:
This Cortex model is made to function Worldwide
Add H1P portable handset for full VHF capability
Built-in Class B SOTDMA with no-loss antenna splitter
Built-in WiFi and Cellular connectivity on monitoring onboard and ashore
Low power consumption hub
10Hz GPS antenna
Monitor up to 5 sensors connected directly
Network to NMEA2000 to monitor sensors remotely and receive Man Overboard alarms from other devices
The Intelligent Boat
SOTDMA smartAIS transponder with remote vessel monitoring and control
Smart & Connected
Predicts collisions with other vessels and knows when someone falls overboard
Knows when your anchor is dragging and will tell you when something is wrong, whether you're onboard or ashore
Cortex is the brain of your boat
The smartAIS Advantage
smartAIS consumes very low power and continuously alerts even if your power intensive MFD or smartphone is switched off
smartAIS proactively alerts you of potential collisions, anchor drag and man overboard situations
Collision Prevention
smartAIS combines GPS, AIS and heading data with smart logic to proactively warns you of collision risks
Clearly see the highest risk vessels
When using a Cortex handset, smartphone, or tablet, make trial maneuvers to see a simulation of where and when your paths will cross
Anchor Watch
Sleep soundly or explore with abandon knowing that your boat is exactly where you anchored
By combining your position and heading, Cortex will determine if your anchor drags
When your boat moves outside your anchor swing radius the alarm will sound on Cortex handsets and your smartphone
Receive alerts while ashore via the Cortex Monitor App on your smartphone
Cortex will keep watch and alert you about changes in water depth, wind speed, or direction while you are anchored
Man Overboard (MOB)
When Cortex detects an AIS MOB activation it immediately sounds the alarm
Compatible with all AIS MOBs, you will see where the MOB was first activated along with continuous updates to its location, bearing, and range
Get clear information and take the best course
Label AIS MOB devices with crew names for easy identification
Pressing the dedicated MOB button activates a trackback mode on all handsets and marks the MOB on NMEA 2000 connected MFDs
Label AIS MOB devices with crew names for easy identification.
Pressing the dedicated MOB button activates a trackback mode on all handsets and marks the MOB on NMEA 2000 connected MFDs
Advanced SOTDMA Technology
SOTDMA is the latest AIS technology with 5W power output, making your boat visible over a longer distance
With faster and more frequent transmissions of your position to other vessels, you'll be safer, especially at speeds of over 14 knots
Connect via WiFi
Receive alerts on your smartphone, tablet, or smartwatch anywhere onboard
Connect up to 10 WiFi devices to receive and manage alarms, view AIS information and instrument data
Integrate Cortex to your NMEA 2000 network and use your mobile devices to view information your instruments provide
10Hz GPS Update Rate
With 10Hz GPS updates, your vessel position is more accurately plotted
When you connect other devices to your Cortex GPS using NMEA 2000 or NMEA 0183, all onboard equipment benefits from the superfast GPS
Integrated No-Loss Splitter
The integrated no-loss splitter allows you to share a single antenna with another VHF and delivers optimum performance for both your VHF and AIS
Low Power Consumption
With low input power, you can keep the Cortex always on, so you are always visible and always watching
Receive alerts without the need for power-hungry MFDs
Cortex Will Get Smarter.
New features and capabilities are downloaded automatically to the Cortex Onboard app for easy updates to Cortex via WiFi whenever convenient
Remote vessel monitoring and control
See your boat's status, receive alerts, and control devices
Easy setup, no fee
With built-in sensors, you can see twice-daily updates of your boat's location, battery level, true heading, ambient temperature, and barometric pressure
Connect to your NMEA network and monitor more - wind speed direction and water depth
As long as your smartphone and boat have cellular access, you can know your boat is safe and secure
No subscription, no hassle
Real-time monitoring and control
Subscribe to a Cortex Monitor Plan to receive alerts, see real-time information about your boat, and remotely control devices like lighting, air conditioning, refrigeration, or ice-makers
Whether you've left your boat, at anchor, or at the marina, know exactly where it is and what's happening onboard
The world's most advanced VHF radio
Upgrade to the future of VHF
The Cortex is VHF-ready, simply add wireless H1P handsets to enjoy the power of VHF and AIS combined
|
1619.99 |
|
|
Power Cable for Cortex - 6'
Replacement 6’ Power Cable for the Cortex M1 & V1.
|
26.99 |
|
|
Cellular Low Loss Cable for Cortex - 5M (16')
Replacement 5M (16’) coaxial cable for the Cortex GPA680 external cellular antenna. RG58 coaxial cable with SMA connectors and supplied with heat shrink to seal the connection to the antenna pigtail.
|
17.99 |
|
|
Non-Powered Handset Cradle for Cortex H1 Tethered & H1P Portable Handset
Mount your handset anywhere on the boat with the non-powered handset cradle. The cradle has a two-piece design hiding the mounting hardware behind the snap cover leaving you with a clean sleek design on the helm or bulkhead. Pair with a RAILBLAZA or RAM Mount style adapter to use with your favorite mounting solution. The non-powered handset cradle can be used with either the H1(tethered) or H1P (portable) handsets.
|
22.49 |
|
|
External Speaker f/M412
5W external speaker with 3.5mm speaker jack and 2M cable
|
57.60 |
|
|
6.5" x 11" Weatherproof PA Speaker
Frequency Response: 200Hz 15kHz
Max Power: 40W
Sensitivity: 120dB 1W/1M
Impedance: 8 Ohms
Size: 6” Width x 10-7/8” Height x 8-3/8” Depth
Weatherproof ABS construction
|
36.00 |
|
|
5" Weatherproof PA Speaker w/Plastic Base
Frequency Response: 300Hz 15kHz
Max Power: 15W
Sensitivity: 105dB 1W/1M
Impedance: 8 Ohms
Size: 5” Diameter x 4-3/4” Length
Weatherproof ABS construction
Includes 10' cord with 3.5mm plug
|
16.48 |
|
|
8.5" Weatherproof PA Speaker with Transformer
Features:
Weather-resistant, aluminum construction
Includes mounting bracket
Rubber bell protector
Selectable 70/25V transformer dial
2-year warranty
Specifications:
RMS Power: 15W
Max. Power: 30W
Transformer Type: 70/25V
Transformer Power Taps: 70V: 15W, 10W, 5W, 3W, 1W
25V: 15W, 10W, 3.7W, 1.9W, 1.3W, 0.6W, 0.4W, 0.1W
Termination Type: Wire
Sensitivity (1W/1M) 105dB
Maximum SPL (Pmax/1m) 117dB
Driver Impedance: 8 Ohms
Magnet 4.9 oz. ferrite
Frequency Response Range 450Hz - 15kHz
Dispersion@100Hz 75' conical
Speaker Dimensions: 8.5" (Dia.) x 9" (D)
Weight: 3.2 lbs.
Material: Aluminum
Color: Grey
|
56.39 |
|
|
Weatherproof PA Speaker with Transformer
A weatherproof PA speaker featuring a built in transformer. This marine-grade PA speaker offers clear sound is built to last and is easy to install.
Technical Specifications:
Color - Off-White
Dimensions (W x H x D) - 6.5" x 11" x 13"
Frequency Response - 250 to 15,000 Hz
Maximum Power - 60W
RMS Power - 32W
Sensitivity - 120 dB with an impedance of 8 ohm
Transformer - 70V
In the Box:
Speaker w/built in transformer
Mounting bracket
Instruction manual
*Sold as an Individual
|
90.00 |
|