Portable Digital Video Recorder with Remote for Fish Scout Camera Systems Features: Playback/Right: Press to playbackvideos/photos or move right when selecting menu items LED indicator: Lights up when any button of key fob is pressed Menu/OK: Press to bring up the menu or select menu items Photo/Up: Press to take a photo or move up when selecting menu items Rec/Down: Press to start/stop video recording or move down when selecting menu items Micro SD card slot: Up to 32 GB (not included) Record: Press to start recording. Press again to stop recording Remote reset: To pair a new key fob with the DVR, press the reset button and then keep pressing any button on the new key fob for about five seconds Connect to camera or DTD controller box Connect to monitor Max recording time: 2GB: 4h 4GB: 8h 8GB: 15.5h 16GB: 32h Set Date and Time: • Power on the DVR. • Press the Menu button on the key fob. • Press the Right button untilreaching Set Date Time. • Press the OK button to begin. • Use the Up/Down buttons to set the correct date and time. • Press the OK button again to finish. Recording Video: When the DVR is in standby mode, press the Rec button on the key fob or the DVR unit to start recording video. Press the Rec button again to stop recording. Taking a Photo: When the DVR is in standby mode, press the Photo button on the key fob to take a photo. Playback of Videos/Photos: When the DVR is in standby mode, press the Playback button on the key fob. The latest video or photo will be displayed.Follow the on-screen instruction to view more recordings. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

XLT 7.0 Powered Marine Winch w/Remote f/Boats up to 20' Features: For boats up to 20' MAX. boat weight 7,000lbs Convenient wireless remote included Rugged strap includes swiveling hook to prevent strap twisting Power in / Power out and free spool Manual override using standard tools in case of power loss 3-position guide so strap comes out stright Corrosion resistant Easy to access light and winch control switches WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

XLT 10.0 Powered Marine Winch w/Remote f/Boats up to 26' Features: For boats up to 26' MAX. boat weight 10,000lbs Convenient wireless remote included Rugged strap includes swiveling hook to prevent strap twisting Power in / Power out and free spool Manual override using standard tools in case of power loss 3-position guide so strap comes out stright Corrosion resistant Easy to access light and winch control switches WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

IP Camera Recorder with IrisControl for Garmin OneHelm Host - 1TB HDD - 32 IP Camera Inputs You’re in Control… CMAC™ is a feature-rich command, management, and control system for your onboard cameras and alarms. Upload your deck plans, set up your onboard cameras and alarms, and control everything from your chartplotter with the Iris Control App. High-Definition Digital Output CMAC systems feature a high-definition HDMI digital video output to provide the very best live, high-quality footage on compatible chartplotters, TVs, and dedicated monitors. CMAC can also be used with standard definition devices with any HDMI to composite video converter. IRIS Control HTML5 App Manage and control your onboard cameras and alarms via the Iris Control HTML5 app. Upload your deck plans and photos, drag and drop the dedicated camera and alarm icons, and you now have the most feature-rich and intuitive marine security and surveillance system in the world. Navigate through your deck plans and select camera icons to switch video inputs, control PTZ cameras via the ultra-responsive virtual joystick, configure and select camera tours and scans, activate thermal color palettes, gyro control, and much, much, more! Iris Control frees up helm space by removing the need for additional control hardware and joysticks. USB Touch Control In addition, to control your compatible MFD network, CMAC features a USB touch control interface. This means chart plotters with USB touch outputs, such as Garmin’s 8000 series, can be used to drive your PTZ cameras with pinpoint accuracy. WiFi / Remote P2P Connectivity Connect CMAC to your onboard WiFi router and view your cameras from around your boat on your smartphone, tablet, or computer. Perfect for keeping an eye on what’s happening above from the below deck! CMAC can also be accessed remotely via P2P connectivity if you have internet access. Integrated Network Video Recorder CMAC built-in recorder is fully configurable to maximize storage time, adjust resolutions and frame rates, set video motion detection, and much more. Features: 1 terabyte hard disc drive This is an IP camera only version that can connect up to 32 cameras Wired for a Garmin unit Fully integrated camera and alarm control & management system for boats Upload your own deck plans & photos and drag & drop camera & alarm icons to select & control Garmin onehelm™ integration with the IrisControlTM app Control and switch your cameras from your Garmin MFD. Configure your boat alarm system, control individual and group alarms Razor-sharp, scaled control via IrisControl’s virtual joystick Full-screen touch control with Garmin’s USB touch (on available models) Firmware is upgradable to unlock features as & when they become available

Hybrid Camera Recorder with IrisControl for Garmin OneHelm Host - 1TB HDD - 8 Analogue & 4 IP Camera Inputs You’re in Control… CMAC™ is a feature-rich command, management, and control system for your onboard cameras and alarms. Upload your deck plans, set up your onboard cameras and alarms, and control everything from your chartplotter with the Iris Control App. Multiple Camera Formats Hybrid models accept analogue, AHD (HD-TVI / HD-CVI), and IP formats. By supporting multiple formats, not only does CMAC offer maximum compatibility, but it also future-proofs your system should you decide to upgrade your cameras. High-Definition Digital Output CMAC systems feature a high-definition HDMI digital video output to provide the very best live, high-quality footage on compatible chartplotters, TVs, and dedicated monitors. CMAC can also be used with standard definition devices with any HDMI to composite video converter. IRIS Control HTML5 App Manage and control your onboard cameras and alarms via the Iris Control HTML5 app. Upload your deck plans and photos, drag and drop the dedicated camera and alarm icons, and you now have the most feature-rich and intuitive marine security and surveillance system in the world. Navigate through your deck plans and select camera icons to switch video inputs, control PTZ cameras via the ultra-responsive virtual joystick, configure and select camera tours and scans, activate thermal color palettes, gyro control, and much, much, more! Iris Control frees up helm space by removing the need for additional control hardware and joysticks. USB Touch Control In addition, to control your compatible MFD network, CMAC features a USB touch control interface. This means chart plotters with USB touch outputs, such as Garmin’s 8000 series, can be used to drive your PTZ cameras with pinpoint accuracy. WiFi / Remote P2P Connectivity Connect CMAC to your onboard WiFi router and view your cameras from around your boat on your smartphone, tablet, or computer. Perfect for keeping an eye on what’s happening above from the below deck! CMAC can also be accessed remotely via P2P connectivity if you have internet access. Integrated Network Video Recorder CMAC built-in recorder is fully configurable to maximize storage time, adjust resolutions and frame rates, set video motion detection, and much more.  Features: 1 terabyte hard disc drive This hybrid version can connect 4 IP cameras and 8 analog cameras  Wired for a Garmin unit Fully integrated camera and alarm control & management system for boats Upload your own deck plans & photos and drag & drop camera & alarm icons to select & control Garmin onehelm™ integration with the IrisControlTM app Control and switch your cameras from your Garmin MFD. Configure your boat alarm system, control individual and group alarms Razor-sharp, scaled control via IrisControl’s virtual joystick Full-screen touch control with Garmin’s USB touch (on available models) Firmware is upgradable to unlock features as & when they become available

Fish-Scout Base Camp Underwater Camera The Fish-Scout® Base Camp is an underwater video camera with HDMI interface. System Includes: HD camera with temperature and direction, plus viewing angle adjustment Control box with HDMI video out 50-foot camera cable with depth marks Cable management spool with rubber stopper Over-hole suspension arm with built-in compass 5V 3A power cube adapter 10’ USB-A to USB-C power cable 10’ HDMI weatherproof cable Protective soft pack carry case with strap Stainless steel mounting screws Specifications: 1080p Sony® camera Connects to any TV or monitor with an HDMI port (monitor not included) Patent pending adjustable camera with five viewing angles: 0° horizontal, 45° up, 90° up, 45° down and 90° down Camera lights: two LEDs and two IR Water temperature is accurate within 1 degree Direction sensor displays: N, NE, E, SE, S, SW or W Water resistant control box: IP65 rating 750mA current draw Total system weight of 2.97 pounds

Fish-Scout 800 Infra-Red Color/B-W Underwater Camera with Soft Case The Fish-Scout 800 IR is a complete underwater viewing system that consists of a color/ black and white camera, 7 color LCD monitor, rigid carrying case with an enclosed 12 volt - 9 amp hour battery, 1 Amp Digital charger and protective soft pack carrying case. The system comes fully assembled and ready to use directly out of the box. This system is energy efficient and can run for over 9 hours on a single battery charge. Comes standard with a two year warranty.

Fish-Scout Predator Color Underwater Camera with Multi View This FS4000P is an underwater camera paired with a monitor & HDMI interface. Also, the underwater camera has multiple viewing angles. System Includes: 5" monitor unit with fixed cable management spool and rubber stopper Built-in Li-polymer battery HD camera with temperature and direction, plus viewing angle adjustment 50-foot camera cable with 1' depth marks Over-hole suspension arm with built-in compass 5V 3A power cube adapter 40" USB-A to USB-C power cable 6" HDMI adapter cable (micro-HDMI to HDMI) MiniSD slot for saving pictures and recording videos (SD card not included) Protective soft-pack carry case ¼"×20 inserts on the top, bottom, and back of the monitor unit Strap-loop lanyard Specifications: 1080p Sony® camera 1280×720 Monitor Connects to any TV or monitor with an HDMI port Patent-pending adjustable camera with five viewing angles: 0° horizontal, 45° up, 90° up, 45° down, and 90° down. Camera lights: two LEDs and two IR Water temperature is accurate within 1 degree Direction sensor displays: N, NE, E, SE, S, SW, or W Current draw: 1.24A @ 3.7V (4.75W) Total system weight of 3.0 pounds

6 Channel Hybrid Recorder 4 Hybrid (TVI or IP) + 2IP, 2TB, NDAA The H6HRN2TB from Speco is a 6 channel hybrid digital video recorder with a 2TB HDD.  Features: H.265 compression - Store up to 2x more than H.264! 1 SATA port for up to 14TB of storage 4K HDMI out and VGA monitor output Object and line crossing detection and alerts Smart Search - Specify a region on the camera view and search on changes in that area

HD10i Pro Gen2 1080p HD Camera System The HD10i 125 Gen2 upgrades include full 1080p HD resolution, image-clarifying True-Color technology, and battery power saver mode. The most advanced HD underwater camera available today, the Aqua-Vu HD10i Pro, equips serious underwater viewers with a dynamic, super-bright, daylight-viewable 10-inch LCD engineered with TouchZoom technology for putting big, elusive fish under the microscope.  The HD10i Pro system utilizes Aqua-Vu’s modular XD Camera with Quick Attachment System™, plus a real-time digital display of camera depth, water temperature, and direction with a full 125 feet of durable cable.    Features: Power power-saving Mode with up to 6 Hours of run time 10" super bright, daylight-viewable LCD with TouchZoom Modular XD camera housing and quick attachment accessory system On-screen display of digital depth, water temperature, and camera direction 1080p color high-definition XD camera with true-color technology Opti-RX Lab-quality lens for ultimate clarity 125-feet of cable Super low-light Vu™ Technology High-Intensity, adjustable IR lighting HDMI video output IP67 Waterproof, heated LCD Boat ready / RAM Mount compatible 12v 9Ah battery New GEN 2 features a power-saving mode with up to 6 hours of run time Smart battery charger Custom soft carry bag

Multi-Vu Revolution Camera System Add real-time video viewing to any RCA-enabled compatible sonar using an Aqua-VU Multi-Vu Revolution Live Underwater Viewing System. Using an Aqua-Vu Multi-Vu Revolution will give you a "live" look underwater in real-time. See what is happening, understand your electronics, and have more fun on the water! Features: Full-color camera with 50 feet of durable cable with depth markings on the cable Patented Revolution™ cable management system for rapid deployment and easy retrieval Custom storage and accessory case Adjustable infrared (IR) lights RCA video out for connectivity with any RCA/BNC video-in-enabled sonar

Multi-Vu Pro Gen2  - HD 1080P Camera System Add real-time "live" viewing to any TV or HDMI-in-compatible sonar using an Aqua-VU Multi-Vu Pro Gen2 Underwater viewing system. The Aqua-Vu Multi-Vu Pro underwater camera system allows you to display an Aqua-Vu underwater camera on any screen, sonar, or TV that accepts HDMI/RCA video input. Using an Aqua-Vu Mulit-Vu Pro will give you a "live" look underwater in real-time. See what is happening, understand your electronics, and have more fun on the water! Features: Modular XD camera housing with quick attachment Accessory system 1080p color high-definition XD camera Opti-RX lab-quality lens for ultimate clarity 75 feet of cable (depth markings on cable) Super Low Light Vu™ technology High-intensity, adjustable IR lighting HDMI & RCA video output (HDMI Cable Included) IP67 Waterproof 12v/110V Power Important FAQs Is a TV or Sonar LCD included? No, these items are pictured for reference only. A compatible TV or Sonar System is required for viewing and is sold separately. How do I power the Multi-Vu Pro? Included is a 110V power cable designed to connect the MV Pro directly to any 110V power system. Also included is a 12V Auxiliary adaptor for additional power options. Which cables are included? Cables included in the box: 110V power cable, a 12V auxiliary power adaptor, and a waterproof HDMI Cable.

HD7i 125 1080p HD Camera System This is the HD7i 125 Gen2 with full 1080p HD resolution and image-clarifying True-Color technology, plus battery power saver mode. Outfitted with Aqua-Vu’s modular XD Camera with quick attach, the HD7i 125 High-Definition Underwater Viewing System displays rich, colorful underwater video on a dynamic and spacious 7-inch Daylight Viewable LCD. The XD Camera includes 125 feet of durable cable with high-intensity, adjustable IR lighting and is compatible with all Aqua-Vu XD accessories (sold separately). Features: 7" super bright (2200 nits), daylight-viewable LCD Modular XD camera housing with quick attachment accessory system Gen2 HD 1080p color high-definition XD camera Opti-RX lab-quality lens for ultimate clarity 125 feet of cable Depth (marked on cable) Super Low-Light Vu™ Technology High-intensity, adjustable IR lighting HDMI video output IP67 waterproof, heated LCD Boat-ready / RAM Mount compatible 12v 9Ah battery GEN 2 features "Power Saving Mode" with up to 6 hours of run time Smart battery charger Custom soft carry bag

AV715c Saltwater Underwater Camera System Aqua-Vu®, the leader in live underwater camera technology, continues to innovate by introducing the AV715c Saltwater Edition. The Saltwater Edition takes all of the advanced Aqua-Vu camera technology and transforms it into a saltwater-ready system at an affordable price. The AV715c Saltwater Edition has a full 7-inch LCD display and Aqua-Vu’s patented XD Camera System, now in the durable stainless steel camera housing. If you are looking for an easy-to-use and durable underwater camera perfect for underwater viewing in saltwater, look no further than Aqua-Vu's AV715c Saltwater Edition! Features: 75' of durable camera cable Full-color camera in stainless steel XD housing Includes camera stabilization fin Sunshield for easy viewing while on the water RCA video out Sealed 12V 7A battery for up to 10 hours of runtime

3M USB-A Power & Digital Video Cable for Nightwave 3M (10’) USB power and digital video replacement cable for Nightwave. This is a SIONYX official accessory.