Cradle f/4 & 6 Man Liferafts Cradle for RescYou™ UKL 4 and UKCL 6 persons yachting Complete with lashings

Cradle f/8 Man Liferaft Features: For RescYou™ & RescYou™Pro, UKL 6 and 8 person yachting liferafts, UKSL 4, 6 and 8 person yachting liferafts Complete with lashings

SPT1001 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18 and 24, GMR18HD, 18xHD, 18HD+, GMR24HD and 24xHD, GMR40 radars Humminbird - HB2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Nobletec - 4KW radars Raymarine - QUANTUM (Q24C) and QUANTUM 2 (Q24D0, RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, 60, 64-S, GB40/NX40/45/NSE1/12 radars Sitex - RADARpc-4D Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

SPT1002 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS 2D, 42DL, 42DL+, 4D, 4D-NXT, DRS4W, NavNet 18" and 24" Humminbird - AS 21RD4KW Inerphase - Mini RE-1, 8, 9 JRC 100, 100mk2, 1066, 1500, 1500mk2, 1800, 2000 Koden - 2kW 12" Lowrance - LRA-1800/RB714A/DX42 Navman - 8000 Series - 18" Seiwa - SWR-1, SWR-8, SWR-9 Simrad - GB40, NX4-/45, NSE8/12, RB712A, DX42S Sitex - MDS-1, 8, 9, 12, NKE-1066 Techmarine - T72.01, T72.02, T-72.04 Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

V-Jam Cleat - Stainless Steel - 6mm(1/4") Max Line Size A stainless steel jam cleat useful for jamming small diameter, low load lines. Ideal for dinghy halyards and outhauls, flag halyards, etc

Stainless Steel Cover f/Duplex Receptacle w/Lift Lid This 302 stainless steel sealed cover with lift lid fits 4700CR, 5262CRR and 5739CR duplex receptacles. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Stud Mount Handrail - 6"  The Stud Mounted Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance and durability. Designed to provide a sleek, smooth handrail transition to the mounting surface your boat. Functional and attractive, with no visible mounting hardware.

Stainless Steel Dimmer f/LED Lights w/On-Off Feature  LED Continuous Adjustment Dimmer Switch is constructed of 304 stainless steel and features easy-to-use color coded dimming levels. When off, the LED ring is orange; maximum bright, the ring is green; lowest light level, the ring is purple; and in between stages are shades of blue. A short press turns the light on and off, then a longer press activates the dimming/brightening function. Memory function turns the light back on at the same brightness level as when it was turned off. 1.5A max. 12VDC. IP67 waterproof rating. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Spring Clamp - 304 Stainless Steel - 2-1/4" Whitecap Marine Hardware is made from the highest quality materials. Whitecap's stainless steel products are manufactured from corrosion resistant 316 Stainless Steel and polished for a long lasting shine. When you want the best for your boat...ask for Whitecap. Features: Length: 2-1/4" Extension: 1" to 1-3/4" Fastener: #6 (2) Material: 304 Stainless Steel

Wire Harness f/4"-6" Light Bar This 11' wiring harness is designed to connect a single LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Single), D2 (Single), 4" E-Series, 6" E-Series, 4" SR-Series, 6" SR-Series. Features: 18 AWG Wire Deutsch Connector Inline Fuse Holder

30° Flush Mount Rod Holder - 304 Stainless Steel - 9-1/4" Features: Length: 9-1/4" Flange: 3-3/8" x 4-1/4" Tube Inner Diameter: 1-5/8" Fastener: 5/16"(3) Material: 304 Stainless Steel

Stamped Stainless Steel Eye Straps (4 Pack) Our Stamped Stainless-Steel Eye Straps are a multi-purpose and high-use boating/marine accessory. These Eye Straps/Camel Backs are perfect for any application that requires hooking a clip for securing an item. Features: Multi-Use Type-304 stainless-steel 1/2" opening diameter 5-year limited warranty Dimensions: Length: 2" Width: 3/8" Height: 11/16"

Flush Mount Flag Pole Socket - Stainless Steel - 1-1/4" ID Features: 316 S.S. Flush Mounted Flagpole Socket. Tube inside dia - 1-1/4" Base 2-3/4" Height - 2-9/16" Fastener - #12 (3)

Mid-Rail Chock/Cleat Stainless Steel - 1-1/4" Chock cleats will fit Schaefer T-Track measuring 1-1/4" wide, 7/16" overall height, 3/16" "T" thickness and a base width of 11/16". They will not fit earlier versions of T-Track or some competitors models. Specifications: Length 7-1/2" (190 mm) ID 1-3/4" (45 mm) Line Size 5/8" (16 mm) Track 1-1/4" x 3/16" (31 mm x 4.6 mm) Pin. Size .355 SWL 4500 lbs. (2045 kg) Weight 1.5 lbs. (.68 kg)

Stainless Steel Skene Chocks - 4-1/2" These Skene Chocks provide a smooth lead for your mooring or dock lines minimizing chafing. The tips of these chocks are designed to overlap, preventing the motion of the boat from causing the line to accidentally work free of the chock. Left and right skene chocks included. Accommodates lines up to 3/4”. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two FH fasteners (not included).