|
Submersible Thru-Hull Pump - 800/1100 GPH
The TRAC 69321 Submersible Thru-Hull Pump is a self-priming, 12V centrifugal pump that's ideal for all watercraft. Designed for easy installation and retrofitting, this pump features a cartridge-style pump head and a universal strainer base.
This versatile thru-hull pump comes packaged with a 1-1/8" 1100 GPH outlet and a 3/4" 800 GPH outlet. Each outlet has an O-ring for easy maneuverability without stripping. It can run dry without damage and is designed to have a low-power draw.
The universal strainer is compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps. The screw mounting holes match Rule and Attwood Tsunami pumps.
Features:
Runs dry without damage
Meets ABYC, NMMA, Coast Guard, and ISO marine standards
Technical Specifications:
Operation - Non-automatic
Flow Rate (3/4" outlet) - 800 GPH
Flow Rate (1-1/8" outlet) - 1100 GPH
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.72 |
|
|
Submersible Thru-Hull Pump - 600 GPH
The TRAC 69320 Submersible Thru-Hull Pump is a self-priming, 12V centrifugal pump ideal for all watercraft. Designed for easy installation and retrofitting, this pump features a cartridge-style pump head and a universal strainer base.
This versatile thru-hull pump comes packaged with a 3/4" 600 GPH outlet. The outlet has an O-ring for easy maneuverability without stripping. It can run dry without damage and is designed to have a low-power draw.
The universal strainer is compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps. The screw mounting holes match Rule and Attwood Tsunami pumps.
Features:
Runs dry without damage
Meets ABYC, NMMA, Coast Guard, and ISO marine standards
Technical Specifications:
Operation - Non-automatic
Flow Rate - 600 GPH
Discharge Outlet - 3/4"
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.27 |
|
|
Shower Drain Box with 1100 GPH Pump - 12V
This compact, full-capacity shower drain system provides 1100 GPH (4164 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer.
|
156.06 |
|
|
Shower Drain Box with 1100 GPH Pump - 24V
This compact, full-capacity shower drain system provides 1100 GPH (4164 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer.
|
159.77 |
|
|
Super-Duty Washdown Pump
Self-priming, 12V diaphragm pump with sealed, pressure switch control and vibration dampening polymer isolating mounting base. Washdown pumps are ideal for cleaning leisure boats, fish boxes, anchor chains, and dinghies. Suitable for fresh and saltwater.
Built for heavy-duty, on-board applications, this TRAC washdown pump has a 5.3 GPM flow rate and boasts 70 PSI. A professional-grade pump, this TRAC washdown pump can be used for both marine and RV applications.
Features:
Smooth, quiet operation and flow
Runs dry without damage
Seamless motor shell
Low power draw
Ignition protection
Easy, quick-connect fittings
Technical Specifications:
Flow Rate - 5.3 GPM
Pressure - 70 PSI
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
128.56 |
|
|
Replacement Strainer Base
Rule-Mate Bilge Pumps RM500A-RM1100A GPH Models (Post 2009).
|
12.91 |
|
|
Oberdorfer N1100 Series Gear Pump
FEATURES
Pump Body:
Bronze
Ports:
1 1/4" NPT
Flow:
40 GPM Max
Pressure:
150 PSI Max
Bearings:
Self-Lubricating Carbon Bearings
Gears:
Bronze Helical Gears
Shaft Seal:
Viton Lip Seals Standard, Buna Lip Seal Optional.
Shaft:
Stainless Steel Shafts
Motor / Drive:
The pump is driven directly from the electric motor shaft by means of a flexible coupling. An aluminum adapter connects the pump to the motor. We have many motor options and can assemble for you.
BRONZE CLOSE COUPLED ROTARY GEAR PUMPS
Service life will be increased substantially if the liquid pumped is clean and has some degree of lubricity. Liquids compatible with bronze and stainless steel can be pumped providing proper seal has been specified. Close tolerances and the positive pumping action make the rotary gear pump capable of lifting water on the suction side as high as 20 feet.
Oberdorfer N1100 Gear Pump Bronze 1 1/4"NPT Viton Lip
|
1882.80 |
|
|
Jabsco 50880-1100 24V Shower Drain Pump
|
360.07 |
|
|
Oberdorfer N1100 Series Gear Pump
FEATURES
Pump Body: Bronze
Ports: 1 1/4" NPT
Flow: 40 GPM Max
Pressure: 150 PSI Max
Bearings: Self-Lubricating Carbon Bearings
Gears: Bronze Helical Gears
Shaft Seal: Viton Lip Seals Standard, Buna Lip Seal Optional.
Shaft: Stainless Steel Shafts
Motor / Drive: The pump is driven directly from the electric motor shaft by means of a flexible coupling. An aluminum adapter connects the pump to the motor. We have many motor options and can assemble for you.
CHARACTERISTICS
BRONZE CLOSE COUPLED ROTARY GEAR PUMPS
Service life will be increased substantially if the liquid pumped is clean and has some degree of lubricity. Liquids compatible with bronze and stainless steel can be pumped providing proper seal has been specified. Close tolerances and the positive pumping action make the rotary gear pump capable of lifting water on the suction side as high as 20 feet.
Oberdorfer Gear Pump Bronze 1 1/4"NPT Viton Lip Seal With Bracket 182TC/184TC
|
2308.50 |
|
|
Oberdorfer N1100 Series Gear Pump
FEATURES
Pump Body:
Bronze
Ports:
1 1/4" NPT
Flow:
40 GPM Max
Pressure:
150 PSI Max
Bearings:
Self-Lubricating Carbon Bearings
Gears:
Bronze Helical Gears
Shaft Seal:
Viton Lip Seals Standard, Buna Lip Seal Optional.
Shaft:
Stainless Steel Shafts
Motor / Drive:
The pump is driven directly from the electric motor shaft by means of a flexible coupling. An aluminum adapter connects the pump to the motor. We have many motor options and can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED ROTARY GEAR PUMPS
Service life will be increased substantially if the liquid pumped is clean and has some degree of lubricity. Liquids compatible with bronze and stainless steel can be pumped providing proper seal has been specified. Close tolerances and the positive pumping action make the rotary gear pump capable of lifting water on the suction side as high as 20 feet.
Oberdorfer Gear Pump Bronze 1 1/4"NPT Viton Lip Seal With Bracket 213TC/215TC
|
2659.64 |
|
|
Talulah High Flow Ballast Pump Impeller Kit
For the well-being of your boat engine your water cooling pump must be able to supply a minimum specified continuous flow of cooling water. The flexible impeller in your pump, which provides this pumping action, is a wear part. Over time the impeller will lose its ability to maintain the pressure needed for the flow of cooling water and must be replaced.
A good quality impeller will provide you with many months of problem-free operation. For an impeller of lesser quality the performance can degrade so rapidly that you, at best, must replace the impeller more often; at worst, you could be left adrift with engine damage.
|
38.52 |
|
|
CAL PUMPS
A/C Circulation Pump - Air Conditioning & Cooling - Air Conditioning - Seawater Circulation Pump - Magnetic Drive Small Pond Pump
CAL customers rely on our stainless steel and bronze pumps, and once you've owned one, you'll know why. Four different models are offered at CLR Marine with flow rates from 320 gph to 1,200 gph cover a wide variety of uses. All pumps in this series come with a one-year warranty and will provide trouble free use in fresh or salt water. You can even use it in hot water up to 110°F!
6' power cords are standard.
Features & Benefits of the CAL PUMPS:
One year warranty
UL Listed for consumer confidence
Premium stainless steel and bronze construction for longevity
Six or twenty foot power cord for convenience
Suitable for fresh or salt water applications
Can be used in hot water applications up to 110°F
Extremely quiet operation
Use submerged or in open air
Corrosion resistant
115 or 220 volt motors
Thermally protected
Optional Mounting Bracket Available (model MSUB OR MSUBM)
Do Not Run Dry
Operate horizontal or volute down
MS320 have ½” MNPT intake and ¼” MNPT discharge
MS580, 900, 1200 have ¾” MNPT intake and ½” MNPT discharge
Cal 1200 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS1200
Cal 900 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS900
Cal 580 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS580
Cal 320 GALLON PER HOUR PUMP W/ 6' CORD
Model: MS320
See all Cal Pump Products
S T A I N L E S S S T E E L & B R O N Z E P U M P S
Model
AMPS
(MIN/MAX)
WATTS
(MIN/MAX)
MAX
FLOW
MAX
HT.
1'
3'
5'
7'
9'
11'
13'
15'
17'
MS320
1.05-1.30
68-89
375
12.7'
360
335
305
262
215
-
-
-
-
MS580
2.15-2.55
138-203
860
14'
830
750
675
580
475
345
125
-
-
MS900
2.17-2.76
156-234
885
16'
855
790
725
650
560
460
350
175
-
MS1200
2.97-3.79
208-312
1100
18'
1070
1000
925
850
760
675
560
425
225
Cal Pumps at CLR Marine
|
|
|
Bilge Pump - 800/1100 GPH - Automatic
The TRAC 69311 Automatic Bilge Pump is a submersible 600 GPH pump. This automatic, self-priming bilge pump is ideal for all watercraft. It is ignition protected, has a low power draw and can run dry without damage. Designed for easy installation and retrofitting, the bilge pump has a cartridge-style pump head and universal strainer base.
This automatic bilge pump has an integrated float switch that allows for automatic ON/OFF functionality.
Universal strainer base is connection-compatible to fit Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps. Screw mounting holes match Rule and Attwood Tsunami.
Features:
Cartridge style pump head
Pump body accepts both 3/4” and 1-1/8” screw-on outlets. Each outlet has an O-ring for easy maneuverability without stripping
Strainer base also includes side mounting option for tight spaces
Runs dry without damage
Meets ABYC, NMMA, Coast Guard and ISO marine standards
Technical Specifications:
Operation - Automatic
Flow Rate (3/4" outlet) - 800 GPH
Flow Rate (1-1/8" outlet) - 1100 GPH
Discharge Outlet - 3/4" and 1-1/8"
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.05 |
|
|
Bilge Pump - 800/1100 GPH - Non-Automatic
The TRAC Outdoor 69301 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft. With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.
The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps. The screw mounting holes match Rule and Attwood Tsunami pumps.
It is ignition protected, can run dry without damage and has a low power draw.
*Float switch not included
Features:
Cartridge style pump head
Pump body accepts both 3/4” and 1-1/8” screw-on outlets. Each outlet has an O-ring for easy maneuverability without stripping
Strainer base also includes side mounting option for tight spaces
Runs dry without damage
Meets ABYC, NMMA, Coast Guard and ISO marine standards
Technical Specifications:
Operation - Non-automatic
Flow Rate (3/4" outlet) - 800 GPH
Flow Rate (1-1/8" outlet) - 1100 GPH
Discharge Outlet - 3/4" and 1-1/8"
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.08 |
|
|
Bilge Pump - 600 GPH - Non-Automatic
The TRAC Outdoor 69300 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft. With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.
The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps. The screw mounting holes match Rule and Attwood Tsunami pumps.
It is ignition protected, can run dry without damage and has a low power draw.
*Float switch not included
Features:
Cartridge style pump head
Strainer base also includes side mounting option for tight spaces
Runs dry without damage
Meets ABYC, NMMA, Coast Guard and ISO marine standards
Technical Specifications:
Operation - Non-automatic
Flow Rate - 600 GPH
Discharge Outlet - 3/4"
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.45 |
|