|
VMANL Mini-ANL Fuse Holder - 4 to 8 AWG
T-SPEC'S VMANL fuse holder ensures excellent current flow by using sturdy, lock-down fasteners to secure your power cable, so you don't have to worry about it getting loose over time. Combine this with solid brass construction and water resistance, and you've got a great link between your amp and your battery that will protect your electrical system.
The T-SPEC VMANL fuse holder accepts 4 to 8 gauge power cables and mini-ANL fuses.
Features:
Compact fuse holder with 360° rotating base
Accepts mini-ANL fuses
Connects to 4- to 8-gauge power cable
Solid brass construction
Black nickel finish
Water resistant
T20 Torx® screws
Gate Lock technology
In the Box:
One (1) mini-ANL fuse holder
Two (2) Threaded end-caps
4 and 8 gauge rubber grommets (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.64 |
|
|
VAGU AGU Fuse Holder 4 to 8 AWG
Fusing an aftermarket stereo system provides protection for your car and your car stereo. No fuse system provides better protection than T-Spec. The new T-Spec compact brass designs are constructed from solid brass and are smaller than anything else in the industry. This combination of top quality materials and thoughtful design provides an incredibly reliable and simple to install product that will last for years.
Features:
Compact fuse holder with 360° rotating base
Accepts an AGU fuse (not included)
Connects to 4 to 8 gauge power wire
Black nickel-plated brass construction
Anodized finish resists rust
Impact-resistant polycarbonate cover
Fastening screws can be used with a variety of tools
T20 Torx® screws
Gate Lock technology
In the Box:
AGU fuse holder
Plastic cover
2 Rubber grommets (pre-installed)
Installation sheet
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.64 |
|
|
VMANL1 Mini-ANL Fuse Holder - 1/0 to 4 AWG
T-SPEC'S VMANL 1fuse holder ensures excellent current flow by using sturdy, lock-down fasteners to secure your power cable, so you don't have to worry about it getting loose over time. Combine this with solid brass construction and water resistance, and you've got a great link between your amp and your battery that will protect your electrical system.
The T-SPEC VMANL1 fuse holder accepts 1/0 to 4 gauge power cables and mini-ANL fuses.
Features:
Compact fuse holder
Accepts mini-ANL fuses
Connects to 1/0 to 8 gauge power cable
Black nickel finish
Water resistant
T20 Torx® screws
Gate Lock technology
In the Box:
One (1) mini-ANL fuse holder
Two (2) Threaded end-caps
1/0 and 4 gauge rubber grommets (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.79 |
|
|
VDMANL DUAL Mini-ANL Fuse Holder - 1/0 to 4/8 AWG
T-SPEC'S VDMANL Dual fuse holder ensures excellent current flow by using sturdy, lock-down fasteners to secure your power cable, so you don't have to worry about it getting loose over time. Combine this with solid brass construction and water resistance, and you've got a great link between your amp and your battery that will protect your electrical system.
The T-SPEC VDMANL Dual fuse holder accepts 1/0 to 4/8 gauge power cables and mini-ANL fuses.
Features:
Accepts mini-ANL fuses
Connects to 1/0 to 4/8 gauge power cable
Solid brass construction
Impact resistant polycarbonate cover
Black nickel finish
Water resistant
T20 Torx® screws
Gate Lock technology
In the Box:
One (1) mini-ANL fuse holder
Two (2) Threaded end-caps
1/0 and 4 /8 gauge rubber grommets (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
24.36 |
|
|
VANL ANL Fuse Holder - 1/0 to 4 AWG
It can be tough to find a good place for your system's fuse holder in a crowded engine compartment. T-SPEC helps you out with their extremely compact Series rotating ANL fuse holder for 1/0-gauge wire that can fit almost anywhere. Black nickel-plated brass construction ensures excellent current flow, while a polycarbonate cover protects the fuse against impacts and dirt.
Features:
Compact fuse holder with 360° rotating base
Accepts an ANL fuse (not included)
Connects to 1/0 to 4 gauge power wire
Black nickel-plated brass construction
Anodized finish resists rust
Impact-resistant polycarbonate cover
Fastening screws can be used with a variety of tools
In the Box:
V12-series ANL fuse holder
Plastic cover
2 Rubber grommets (pre-installed)
Installation sheet
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.68 |
|
|
VANL1 ANL Fuse Holder - 1/0 to 4 AWG
It can be tough to find a good place for your system's fuse holder in a crowded engine compartment. T-SPEC helps you out with their extremely compact ANL fuse holder for 1/0-gauge wire that can fit almost anywhere. Black nickel-plated brass construction ensures excellent current flow, while a polycarbonate cover protects the fuse against impacts and dirt.
Features:
Compact fuse holder
Accepts an ANL fuse (not included)
Connects to 1/0 to 4 gauge power wire
Black nickel-plated brass
Anodized finish resists rust
Impact-resistant polycarbonate cover
Fuse fastening screws can be used with a variety of tools
TPE wrapped soft touch
Dual sizes gasket set
Water resistant
In the Box:
ANL fuse holder
Plastic cover
2 Rubber grommets (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.56 |
|
|
V8 Series 30 AMP Mini-ANL Fuse - 2 Pack
T-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit. Each of these heavy-duty fuses features a little window through which you can visually check the fuse's status.
Features:
Nickel plated
Status window
*Sold as a 2 Pack
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3.00 |
|
|
V8 Series 40 AMP Mini-ANL Fuse - 2 Pack
T-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit. Each of these heavy-duty fuses features a little window through which you can visually check the fuse's status.
Features:
Nickel plated
Status window
*Sold as a 2 Pack
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3.00 |
|
|
V8 Series 60 AMP Mini-ANL Fuse - 2 Pack
T-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit. Each of these heavy-duty fuses features a little window through which you can visually check the fuse's status.
Features:
Nickel plated
Status window
*Sold as a 2 Pack
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2.72 |
|
|
V8 Series 80 AMP Mini-ANL Fuse - 2 Pack
T-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit. Each of these heavy-duty fuses features a little window through which you can visually check the fuse's status.
Features:
Nickel plated
Status window
*Sold as a 2 Pack
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3.00 |
|
|
V8 Series 100 AMP Mini-ANL Fuse - 2 Pack
T-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit. Each of these heavy-duty fuses features a little window through which you can visually check the fuse's status.
Features:
Nickel plated
Status window
*Sold as a 2 Pack
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3.00 |
|
|
V8 Series 125 AMP Mini-ANL Fuse - 2 Pack
T-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit. Each of these heavy-duty fuses features a little window through which you can visually check the fuse's status.
Features:
Nickel plated
Status window
*Sold as a 2 Pack
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3.00 |
|
|
V8 Series 150 AMP Mini-ANL Fuse - 2 Pack
T-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit. Each of these heavy-duty fuses features a little window through which you can visually check the fuse's status.
Features:
Nickel plated
Status window
*Sold as a 2 Pack
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2.92 |
|
|
ANL Fuse Holder with 2 Additional Studs, 750A
Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load.
Radiused ends improve cable routing options
ANL: for use with 5/16" (8mm) or 3/8" (10mm) ANL fuses
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.47 |
|
|
ATM Mini Style Inline LED Fuse Holder - Up to 30A
This Sea-Dog LED inline mini fuse holder is meant for ATM mini-style fuses.
Features:
LED indicator that lights up when the fuse is blown
Designed to accept ATM mini automotive-style spade terminal fuses
For use with Sea-Dog ATM Mini Style Fuses 445002-445030 (sold separately).
12 gauge, 6” AWM wire lead
Constructed of injection-molded PVC. IP67 waterproof rating
Specifications:
Max Amps: 30
Fuse Holder Length: 1-9/16 in.
Fuse Holder Width: 15/16 in.
|
6.49 |
|