316 Stainless Steel Snap Hooks - Pair The Tigress line of outrigging accessories features a great selection of accessories to fit the needs of any fisherman. Whether you have 15' skiff poles or 35' double rigged tournament poles, Tigress has a rigging accessory for you. All accessories feature top quality materials and are ready to be installed.

316 Stainless Steel Rings - Pair The Tigress line of outrigging accessories features a great selection of accessories to fit the needs of any fisherman. Whether you have 15' skiff poles or 35' double rigged tournament poles, Tigress has a rigging accessory for you. All accessories feature top quality materials and are ready to be installed.

316 Stainless Steel Flared Rod Holder Features: 10" weld on 316 Stainless Steel tapered without blade Heavy duty Rod holder ID 1-5/8" With vinyl liner WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

316 Stainless Tag Line Weight Hi-polished 316 stainless steel tag line weight with 1/4" rubber bumper to protect your boat

Large Stainless Steel Cup Insert This 316 stainless steel cup insert fits 30 oz and 20 oz double wall vacuum sealed stainless steel cups and tumblers (Yeti, Tervis, Engel, etc.)

Economy Stainless Steel Gunnel Mount Rod Holder- 0° Features: 316 Stainless Steel Black Liner 9” w/ Oval Cast Flange Top Pin Base

Economy Stainless Steel Gunnel Mount Rod Holder- 15° Features: 316 Stainless Steel Black Liner 9” w/ Oval Cast Flange Top Pin Base

Economy Stainless Steel Gunnel Mount Rod Holder- 30° Features: 316 Stainless Steel Black Liner 9” w/ Oval Cast Flange Top Pin Base

Command Ratchet Hinges - 9-3/8" - Polished 316 Stainless Steel - Pair Constructed from high-grade stainless steel and brass, our Command Ratchet Hinge is ideal for sunpads, bolsters and lounge backrests. This heavy-duty specialty hinge has a 15-degree locking inclination and ratchets up to four positions. Features: Highly polished marine-grade stainless-steel Type-316L  All brass bearings for durability  Meets ABYC H-31 standards class B* application, 250lb ft of torque load for pair  15-degree locking inclination increments starting at 30 degrees  Easily adaptable to many applications  Designed for up to 4" thick cushions  Returns to horizontal position at 100 degrees  Countersunk for #10 fastener or 1/4-20 bolt  Sold in pairs  5-year limited warranty

Command Ratchet Hinges - 18-1/2" - 316 Stainless Steel - Pair Because of the success of the popular 9-3/8" long Command Ratchet Hinge, TACO developed the 18-1/2" long counterpart for longer applications. This heavy-duty, extended specialty hinge has one locking position at 105 degrees and is perfect for sun pads, bolsters, and lounge backrests. Features: Polished stainless-steel Type-304 Mounts above the deck  One locking position at 105-degrees  Can be used for seat backs up to 22" long  Single or double-seat capacity  Meets ABYC H-31 standards class B* application, 500 ft-lb. of torque load for pair  500-hour salt fog test  For cushions up to 4" thick  5-year limited warranty *Sold as a pair

"Captain Hook" Chain Snubber Small Snubber Hook Only (5/16" T-316 Stainless Steel Stock) The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice. Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock) The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice. Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

RVM-412 Stainless Steel Thru-Hull Pair, 12 Degree Deadrise & 10M Cable The RVM-400 series transducers feature DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. The RVM-400 series also has a built-in fast-response water temperature sensor for quick, accurate readings. The RVM-412 pairs feature titled offset sonar elements inside their surface mount housings. The tilted elements ensure the sonar's beam patterns are correctly aligned for maximum performance while eliminating the drag and turbulence associated with a fairing-blocked transducer installation. Bundled transducer pairs include a Y-Cable harness that internally joins the two transducers together and an 8-meter transducer extension cable.  The RVM-412 is a port and starboard transducer pair designed for boats with 5° to 15° of deadrise. Each transducer element is tilted at 12° to compensate for the hull deadrise.  *Works with Axiom 2 Pro RVM series, and RVM1600 Sounder Module Features: 600-Watt traditional CHIRP High-performance Down and SideVision ceramics High-speed housing with isolation plate 10M Cable RVM-412 port and starboard pair accommodates hulls with a deadrise between 5° and 15°

RVM-420 Stainless Steel Thru-Hull Pair, 20 Degree Deadrise & 10M Cable The RVM-400 series transducers feature DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. The RVM-400 series also has a built-in fast-response water temperature sensor for quick, accurate readings. The RVM-420 is a port and starboard transducer pair designed for boats with 15° to 25° of deadrise. Each transducer element is tilted at 20° to compensate for the hull deadrise.  The RVM-420 transducer pairs feature titled offset sonar elements inside their surface mount housings. The tilted elements ensure the sonar's beam patterns are correctly aligned for maximum performance while eliminating the drag and turbulence associated with a fairing-blocked transducer installation. Bundled transducer pairs include a Y-Cable harness that internally joins the two transducers together and an 8-meter transducer extension cable.     *Works with Axiom 2 Pro RVM series, and RVM1600 Sounder Module Features: 600-Watt traditional CHIRP High-performance Down and SideVision ceramics High-speed housing with isolation plate 10M Cable RVM-420 port and starboard pair accommodates hulls with a deadrise between 15° and 25°

Stainless Steel Gaff Hook Machined Stainless Steel base and gaff hook provide the strength you need for your light duty fishing.  Designed for light duty use.  *Pole sold separately. Features: Made of Stainless Steel Uni-Snap quick release adapter snaps onto the Perfect Pole telescoping or Fixed Length handle *Sold as an Individual