|
6" Extender Snubber
Extension Snubber
|
9.53 |
|
|
T-Top Bow Shade 6'L x 90"W - Pacific Blue
Recommended for boats 17'-21'
A quick and easy way to gain additional shaded area on your center console boat with a T-Top installed. Constructed from Hot Shot marine grade polyester fabric, the top is strong yet lightweight. It is secured to the T-Top and bow rails with adjustable straps and quick release buckles for simple and fast installation. Shade folds down to compact size for ease of storage and is available in 9 colors to best match your boat.
|
151.97 |
|
|
T-Top Bow Shade 6'L x 90"W - Sand
Recommended for boats 17'-21'
A quick and easy way to gain additional shaded area on your center console boat with a T-Top installed. Constructed from Hot Shot marine grade polyester fabric, the top is strong yet lightweight. It is secured to the T-Top and bow rails with adjustable straps and quick release buckles for simple and fast installation. Shade folds down to compact size for ease of storage and is available in 9 colors to best match your boat.
|
151.97 |
|
|
The Snubber - New Line Now At CLR Marine.
The Snubber product line includes a Snubber Twist mooring compensator, Snubber Fender fastener, and Snubber Pull rope for pulling and lifting. The new product line is designed to be innovative and easy to use for all boaters. All Snubber products are made in Finland for domestic and global customers. The Snubber offers a simple, safe, and high-quality customer and user experience.
The Snubber - Product Line
Snubber FENDER - Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat.
Snubber TWIST - Snubber TWIST is a patented mooring compensator that absorbs the mooring line’s shocks and reduces the stress on your boat and the dock.
Snubber PULL - Two products with one click. Snubber PULL is a comfortable pulling rope for a rowboat or any small vessel. Securely attach the rope in a few seconds.
Specials Closeouts Remanufactured Rebates
|
|
|
12" Economy Snubber
With Glass Outrigger Ring & Nickel Plated Snap
|
11.40 |
|
|
16" Deluxe Snubber
With Glass Outrigger Ring & Nickel Plated Snap
|
13.03 |
|
|
16" Elite Snubber
With Nickel Plated Snap & Single Stainless Swivel
|
22.81 |
|
|
16" Ultimate Snubber
With Nickel Plated Snap & Double Stainless Swivel
|
29.65 |
|
|
6" SS Rod Holder Extension
Rod holder extenders used to shorten your rod holder to fit your bent butt fishing rod
Fits most medium and large rod holders and are 1.51" wide
|
27.71 |
|
|
EXTEND YOUR STEP THREE the Boarding Ladder Extension
As seen on NBC, Fox, CBS, and 100s of other sites
Easily Extend Your Boarding Ladder by 40" for More Safety and Convenience
We heard your request's you wanted a longer version of Extend Your Step, one that wouldn't swing on your boat.
Extend Your Step 3 is compatible with any tubular boarding ladder with rungs or flat steps up to 1.25" wide. It is compatible with boarding ladders made from top manufacturers such as AFI, Windline, Garelick, and Seachoice. It fits all ladders up to 1.25", round or flat. It can even be used as a dinghy boarding ladder.
Adjust the width of Extend Your Step Three with a Philips screwdriver and a hacksaw easily if necessary. The 10" width allows for plenty of room to get on and off your boat with both feet. Weight limit 250 max.
You can trust in the durability of Extend Your Step 3, as it is made from premium high-density polyethylene and is UV-stabilized to prevent sun-related damage. It will stand up to the harshest marine environments and repeated usage.
Please make sure you Measure before you buy as there is a return fee. Now Measure Again...
How to use the Extend Your Step Three
Assembly Instructions
Dealer Special order 6 and $ave
Exclusively made for and sold by CLR Marine, Made in Springfield Missouri
BERRY COMPLIANT: produced in America for and Buy-American organizations.
We do charge a $5.00 re-boxing fee on any returned ladder.
|
129.95 |
|
|
ATLAS™ 6" Set Back Hydraulic Jack Plate - Heavy Duty - Black
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1879.46 |
|
|
ATLAS™ 6" Set Back Hydraulic Jack Plate - Heavy Duty
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1740.92 |
|
|
BLACK FRIDAY SALE ON OUR EXTEND YOUR STEP LADDERS !!
USE COUPON CODE: 2018LastSale , when checking out.
While supplies last.
Extend Your Step offers a convenient and easy solution to increase the length of your ladder without major modifications or an expensive total replacement. It's compatible with many stock boarding ladders and takes just minutes to install.
At 10” wide and 24” long, it provides plenty of extra reach and is made to fit many types of boarding ladders. Made from premium high-density polyethylene, it is far superior than any type of rope ladder in terms of durability, sturdiness and simple convenience. The recommended weight limit should not exceed 230 pounds.
Extend Your Step features wide compatibility:
It can fit any type of tubular boarding ladder and flat steps up to 1”, flat or round.
It fits most boarding ladders with a rung size up to 1” made by Garelick, AFI, Windline, Seachoice, and it also fits all round rung ladders.
There's plenty of room for both of your feet on one step. Perhaps you won't need that much space; you can easily adjust Extend Your Step down in size with a hacksaw and Philips screwdriver as needed.
Extend Your Step makes it much easier to get on and off your boat in a variety of circumstances. There's no need to risk injuring yourself or others by relying on the shorter stock ladder of your boat. Some of the uses for either of the boarding ladder extensions is a boat swim platform ladder, or pontoon boat ladder extension.
ALL NEW – Extend Your Step Three
You asked for it – a longer and non-moving version of Extend Your Step. That's exactly what you get with Extend Your Step Three. When attached to the second step of your boarding ladder, Extend Your Step Three won't swing, while providing you with a convenient ladder extension. This ladder extension is 10” wide and 41” long and fits ladders with up to 1.25” rungs. The recommended weight limit should not exceed 230 pounds.
Enjoy the same boarding ladder compatibility and durability as Extend Your Step along with 3 additional steps. If you don't mind if it swings, Extend Your Step 3 will provide you with 3 additional steps on your boarding ladder, making it easier than ever to get on and off your boat in any circumstance.
Extend Your Step 3 features:
It can fit any type of tubular boarding ladder and flat steps up to 1.25”, flat or round.
It fits most boarding ladders with a rung size up to 1.25” made by Garelick, AFI, Windline, Seachoice, and it also fits all round rung ladders.
It can even be used as a boarding ladder for your dinghy.
Specials Closeouts Remanufactured Rebates
|
|
|
HUGE SALE ON OUR EXTEND YOUR STEP LADDERS !!
USE COUPON CODE: 2018LastSale , when checking out.
While supplies last.
Extend Your Step offers a convenient and easy solution to increase the length of your ladder without major modifications or an expensive total replacement. It's compatible with many stock boarding ladders and takes just minutes to install.
At 10” wide and 24” long, it provides plenty of extra reach and is made to fit many types of boarding ladders. Made from premium high-density polyethylene, it is far superior than any type of rope ladder in terms of durability, sturdiness and simple convenience. The recommended weight limit should not exceed 230 pounds.
Extend Your Step features wide compatibility:
It can fit any type of tubular boarding ladder and flat steps up to 1”, flat or round.
It fits most boarding ladders with a rung size up to 1” made by Garelick, AFI, Windline, Seachoice, and it also fits all round rung ladders.
There's plenty of room for both of your feet on one step. Perhaps you won't need that much space; you can easily adjust Extend Your Step down in size with a hacksaw and Philips screwdriver as needed.
Extend Your Step makes it much easier to get on and off your boat in a variety of circumstances. There's no need to risk injuring yourself or others by relying on the shorter stock ladder of your boat. Some of the uses for either of the boarding ladder extensions is a boat swim platform ladder, or pontoon boat ladder extension.
ALL NEW – Extend Your Step Three
You asked for it – a longer and non-moving version of Extend Your Step. That's exactly what you get with Extend Your Step Three. When attached to the second step of your boarding ladder, Extend Your Step Three won't swing, while providing you with a convenient ladder extension. This ladder extension is 10” wide and 41” long and fits ladders with up to 1.25” rungs. The recommended weight limit should not exceed 230 pounds.
Enjoy the same boarding ladder compatibility and durability as Extend Your Step along with 3 additional steps. If you don't mind if it swings, Extend Your Step 3 will provide you with 3 additional steps on your boarding ladder, making it easier than ever to get on and off your boat in any circumstance.
Extend Your Step 3 features:
It can fit any type of tubular boarding ladder and flat steps up to 1.25”, flat or round.
It fits most boarding ladders with a rung size up to 1.25” made by Garelick, AFI, Windline, Seachoice, and it also fits all round rung ladders.
It can even be used as a boarding ladder for your dinghy.
Specials Closeouts Remanufactured Rebates
|
|
|
ALAS Adjustable Fuel Sender - 6 to 3/4-23" - 10-184 Ohm
VDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh.
These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm. For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low.
Features:
Connection - M4 Stud
Voltage: 6-24V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
37.68 |
|